REPAIR/MAINT OF INTERNAL ELECTRIFICATION WITH FITTING/FIXURE OF OTM ACCN OF ZONE A AT MIL STN SRI GANGANAGAR

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to sore for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer-in-charge.

M&L for concealed conduit point wiring complete for light /fan with cable 1.5 sqmm(Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC conduit pipe medium grade 20mm bore,pipe hooks,elbows,junction covers and junction boxes, after cutting in wall chasing for conduits and sinking's for sunken cast iron /pressed steel terminal boxes of suitable length and thickness for mounting switches, sockets, fan regulator with 3mm thick plastic laminated seat cover fixed with brass screws and cup washers, duly grouting and painted with red oxide metal primer and making good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth contuity conductor along with point wiring of 1.5 sqmm copper FRLS PVC insulated cable for one light/fan point controlled by one way switch and connected to common earth dolly, complete all as specified and directed by Engr-in-charge.

All as described in Srl item No -02 here in before but for one switch socket combination 5/6 Amps on independent board complete all as specified and directed by Engineer - in - Charge.

All as described in Srl item No -02 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.

All as described in Srl item No. 2 here in before but for one switch socket combination 6 pin 5/15 Amps on independent board with 2.5 Sqmm (Nominal Area) FRLS PVC insulated multistranded unsheathed copper conductor and continuous earth contuity conductor along with point wiring of 2.5 sqmm copper FRLS PVC insulated cable copper cable complete all as specified and directed by Engineer - in - Charge.

All as described in Srl item No -02 here in before but for one light point controlled by two ways switches complete all as specified and directed by Engineer - in - Charge.

All as described in Srl item No -02 here in before but for call bell point complete all as specified and directed by Engineer - in - Charge.

M & L for concealed conduit point wiring in existing conduit for light / fan on independent / combined board with cable 1.5 Sqmm (Nominal Area) FRLS PVC insulated multistranded unsheathed copper conductor, including new cast iron/ pressed steel terminal boxes 1.2 mm thick and 60 cm deep for mounting, switches, sockets, fan regulators with 3 mm thick plastic laminated sheet cover fixed with brass screws and cup washers, duly grouting and painted with red oxide metal primer including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper FRLS PVC insulated cable for one light/ fan point controlled by one way switch and connected to common earth dolly, complete all as specified and directed by Engineer in charge.

All as described in Srl item No -08 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge.

All as described in Srl item No. 8 here in before but for one switch socket outlet 3 pin 5/15 Amps on independent board with 2.5 Sqmm (Nominal Area) FRLS PVC insulated multistranded unsheathed copper conductor and continuous earth contuity conductor along with point wiring of 2.5 sqmm copper FRLS PVC insulated cable copper cable complete all as specified and directed by Engineer - in - Charge.

All as described in Srl item No -08 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.

All as described in Srl item No -08 here in before but for one light point controlled by two way switches complete all as specified and directed by Engineer - in - Charge.

All as described in Srl item No -08 here in before but for call bell point complete all as specified and directed by Engineer - in - Charge.

S & F switch piano flush type 5/6 Amp single pole one way complete all as specified and directed by Engineer - in - Charge

S & F switch piano flush type 5/6 Amp single pole two way complete all as specified and directed by Engineer - in - Charge

S & F bell push flush type 5 Amps complete all as specified and directed by Engineer - in - Charge

S & F electronic bell AC 230 volt single pole ding dong type complete all as specified and directed by Engineer - in - Charge

S & F switch socket combination 5 pin, 5/6 Amps flush type complete all as specified and directed by Engineer - in - Charge

S&F Switch socket combination 2 in 1, 6 pin , 15/16 Amp flush universal type all as spd and directed by Engr in charge.

S & F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & F ceiling rose, surface bakelite 65x50 mm three terminals complete all as specified and directed by Engineer - in - Charge.

S & F in replacement modular stepped type,single socket fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge

S & F in replacement industrial socket metal clad plug and socket with MCBs single pole 20 Amps complete all as specified and directed by Engineer - in - Charge.

S & F in replacement modular switch 5/6 Amp single pole one way one module complete all as specified and directed by Engineer - in - Charge

S & F in replacement modular switch socket combination 5 pin, 5/6 Amps 5 in 1 flush type complete all as specified and directed by Engineer - in - Charge

S & F in replacement modular switch socket combination 6 pin 5/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & F in replacement modular switch flush type 5/6 Amps single pole two way complete all as specified and directed by Engineer - in - Charge

S & F in replacement modular Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & F in replacement modular bell push flush type 5 Amps complete all as specified and directed by Engineer - in - Charge

S & F in replacement extruded aluminium LED batten channel 20 watt having input voltage AC90-300V, 50Hz,6500K, with white acrylic cover tube light fitting wall mounted complete with rod, driver and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge. Make :-Havells cat part No. LUMILINEPLUSBS20WLED865SPCSS, Bajaj Cat part No : BCLSBAL 20W CW, Crompton cat part no : CCS-100-20-65-HL2-DP-NWH

S&F in replacement security light fitting LED TYPE 25 watt with all necessary accessories, Clear transparent acrylic cover, prewired suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge. Make :-Havells cat part No. ENDURAPEARLSL25WLED757SASYTOPCMP, Bajaj Cat part No : BRLEP 25W LED WH, Crompton cat part no : LSTS-25-CDL-M

S & F in replacement angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.

S & F in replacement water tight bulk head fitting, comprision of connector galvanised cast iron back plate, weather proof enamelled gallery, glass well and including 10 watt LED lamp complete all as specified and directed by Engineer-in-Charge. Make :-Havells cat part No. HEXAFT10WLED857SSYMBOPC, Bajaj Cat part No : BIBWP 10W LED, Crompton cat part no : LBHP-10-CDL

S&F in replacement decorative wall light fitting made up of polycarbonate suitable for 10 watt LED lamp complete all as specified and directed by Engineer - in - Charge. Make :-Havells cat part No. LHFOFWE1TZ1W012 or equivalent make in Bajaj , Crompton

S&F in replacement compact decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1x10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer - in - Charge. Make :-Havells cat part No. LUMILINEPLUSBS10WLED865SPCSS. Bajaj Cat part No : BCLSB 10WH, Crompton cat part no : LDL-10-CDL

S & F stepped type,single socket fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge

S & F in replacement recess mounting 2x2 feet 36 watt LED luminaire with powder coated CRCA housing with LEDs, seamless front frame with high transmission acrylic cover and fixed electronic driver (surge protector ) complete all as specified and directed by Engineer - in - Charge . Make :-crompton cat part No. LCTLRNE-36-FO-CDL or equivalent make in Bajaj , havells

S&F in replacement round recess mounted LED edge lit slim downlight 12 watt with die- cat aluminum housing fineshed in premium white powder coating efficacy 100lm/w complete all as specified and directed by Engineer - in - Charge. Make :-Havells cat part No. EDGEPRORDDLR12WLED857S. Bajaj Cat part No : BPSLR 12 WH, Crompton cat part no : LSCRM-12W-CDL

S&F in replacement LED flood light complete with pressure die cast housing and toughened glass incl LED bulp and all standard accessories as per design of manufacturer suitable for IP-65 degree of protection and of 80 W capacity, incl mounting bracket of suitable size made out of light grade GI tube along with clamp,nut,bolt,washer etc and copper wire of suitable size for making electric connection complete all as specified and directed by Engineer - in - Charge. Make :-Havells cat part No. BAYBRITEFLARE80WLED857PWBBOLTG. Bajaj Cat part No : BJFL 80W LED I, Crompton cat part no : LFL-80-CDL/60-M

S&F in replacement LED hinghbay luminaire 80W having fun ventilation technology for better thermal management and its cutting edge LED technology seeks to various industrial application complete all as specified and directed by Engineer - in - Charge. Make :-Havells cat part No. ILIOSBAYPLUSHBP80WLED857SP90DTOPC. Bajaj Cat part No : BGHB 80W LED GV, Crompton cat part no : LHB11-80-CDL/60-M

S&F in replacement LED land scape light/bollard light 10W/9W with 900mm hight extruded aluminium cylindrical section housing IP-65 rated complete with base & log bolt grafite grey epoxy cationic powder coated all accessories complete all as specified and directed by Engineer - in - Charge. Make :- Bajaj Cat part No : BGBOM 650 9W LED, Crompton cat part no : LBLSR-10-WW or equivalent makes of Havells

S&F in replacement LED suspension light fitting 36 W (fixture size : ( LxWxH) in 1136x54x74 mm), aluminum extruded direct - indirect light effect gives homogenous light distribution effect & enhances the visual comfort with joining kit accessories and connection to mains cable complete all as specified and directed by Engineer - in - Charge. Make :-Havells cat part No. DESTELLODILP36WLED857SPMMAWH, Crompton cat part no : LCLP54-36-CDL or equivalent makes of Bajaj

S & F in replacement sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLS stranded copper conductor drawn in existing PVC conduit including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge.

S & F in replacment sheet metal enclosure for double door DB's made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S & F in replacment sheet metal enclosure for double door DB's made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, 240 Volts, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S & F in replacment sheet metal enclosure for double door DB's made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounting VTPN 4 ways, 415 Volts, 250 amps bus bar, stove enamelled dust and vermin proof, IP:43 protection suitable for incorporation FP MCCB (v-Tech) N1 Frame upto 125A, isolators and including give connection with wire and cable etc complete all as specified and directed by Engineer - in - Charge.

S&F in replacment MCCB TPN 63 Amps with breaking capacity 16 KA, fixed TM and 415 volts AC Supply complete all as specified and directed by Engineer - in - Charge.

S&F in replacment MCCB TPN 40 Amps with breaking capacity 16 KA, fixed TM and 415 volts AC Supply complete all as specified and directed by Engineer - in - Charge.

S&F in replacment MCCB TPN 100 Amps with breaking capacity 16 KA, fixed TM and 415 volts AC Supply complete all as specified and directed by Engineer - in - Charge.

S & F in replacment MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

S & F in replacment MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

M & L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried in ground (earth pit not less than 2.25 Mtr deep below normal ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level, connecting to the Galvanised iron earth lead 4 mm dia GI earth wire, by means of bolts, nuts check nuts and washers of galvanised iron and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20mm graded stone aggregate with 40mm thick cover of RCC (1:2:4) reinforced with XPM (wieght not less than 4gs/Sqm) and frame of angle iron 25mm x 25mm x 6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm x 8 mm FI with fixing arrangements, funnel, wire mesh and earth work in hard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 Mtrs all as per electrical Plate No.3 of SSR Part I and connecting to earth test point including taking our unserviceable earthing with all acessories all as specified or indicated including testing on completionall as specified and directed by Engineer - in - Charge.

Supplying, laying and testing in replacement 10 Sqmmx2 core XLPE insulated, heavy duty electric cable with aluminium conductor 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/ laid under roads/paths/ drain/ culverts or passing through pipes complete all as specified and directed by engineer in charge.

Supplying, laying and testing in replacement 25 Sqmmx4 core XLPE insulated, heavy duty electric cable with aluminium conductor 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/ laid under roads/paths/ drain/ culverts or passing through pipes complete all as specified and directed by engineer in charge.

Excavation in trenches in n.exc. 1.5 m wide & n. exc. 1.5m in depth in soft/ loose soil for laying of cablecomplete all as specified and directed by Engineer - in - Charge

Returning, filling in, including spreading, levelling watering and well ramming in layers n. exc. 25cm thick in layers soft/loose soil complete all as specified and directed by Engineer - in - Charge

Removing surplus soil n. exc. 50 m & depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed by Engineer - in - Charge.

Supply & filling/ laying a layer of dry coarse sand 8 cm thick before laying ofcable and 15 cm thick after laying of cable complete all as specified and directed by Engineer - in - Charge. Note:- After punning drain 18 cm will be measured for payment.

M&L for brick protection layer with one brick wide using sub class ‘B’ bricks laid flat across the cable complete all as specified and directed by the Engineer in charge.

Note : Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

AYUSH BUILDERS

Ganganagar Enterprises

M/S BUDHRAM BISHNOI

SM CONSTRUCTION COMPANY