SMART PERIODICAL SERVICES TO EXTERNAL INTERNAL OF MD ACCN OF JCOs and ORs, DEFENCE CIVILIAN MD ACCN, COY AREA, OLD AASHIANA ACCN, MES INSTALLATIONS AND OTHER OTM BLDGS AT AHRR UNDER GE EM RR HOSP, DELHI CANTT-10

Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and fair without using extra cement, complete all as specified & directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement, complete all as specified & directed.

M&L for rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling, including finishing the surface even and fair without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 1mm thick cement base wall care putty, complete all as specified and directed Note : (a) All work shall be done mechanically through authorised applicator only. (b) Cost of above mentioned shall also included in quoted rates.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior grade weather proof paint over a coat of primer & 1mm thick cement base wall care putty, complete all as specified and directed.Note : (a) All work shall be done mechanically through authorised applicator only. (b) Cost of above mentioned shall also included in quoted rates.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over 1mm thick cement base wall care putty, complete all as specified and directed.Note : (a) All work shall be done mechanically through authorised applicator only. (b) Cost of above mentioned shall also included in quoted rates.

M&L for complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechancical sander(having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" and suitable for base to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for water proof cement based putty @1kg (undiluted) per sqm of average thickness 2mm over the plastered /old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mecghanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface . Step 1: Mix the putty powder by adding water as manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2: Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine/manully of putty application finishing the surface even and smooth in level without any undulations. Step 3: Allow 6-8 hrs time to dry the putty surface

M&L for one coat of acrylic water based exterior grade primer @ 0.9litre(undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed.