Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹84.7 LAccepted-AOC A 2 206 SAI DWARKAMAI NIBM ROAD KONDHWA PUNE 411 048 | PUNE | MAHARASHTRA | 411048 | L1 | Accepted-AOC Bidder quoted L1 rates | |
| 2 | L2₹88.9 L+₹56,122 (0.64%)Rejected-Finance | L2 | Rejected-Finance Bidder not quoted L1 rates | |
| 3 | L3₹94.3 L+₹5.9 L (6.72%)Rejected-Finance BLDG 9 FLAT 130 MIRA CO OP HOUSING SOCIETY LTD SALISBURY PARK GULTEKDI PUNE 411037 | PUNE | PUNE | MAHARASHTRA | 411037 | L3 | Rejected-Finance Bidder not quoted L1 rates | |
| 4 | L4₹95.5 L+₹7.2 L (8.14%)Rejected-Finance | L4 | Rejected-Finance Bidder not quoted L1 rates | |
| 5 | L5₹1.0 Cr+₹15.5 L (17.6%)Rejected-Finance N A | NA | NA | 121004 | L5 | Rejected-Finance Bidder not quoted L1 rates |
| Sl No | Description | Qty | Unit | M/S NAVNEET S MORDE L10 | M/s.BAJRANG CONSTRUCTION L7 | Mourya Construction L4 | M/S - R K CONSTRUCTIONS L5 | Parhar Enterprise L2 | M/s PRATAP VIJAYSINGHRAO DESAI L9 | Vijay Construction and Company L3 | RAJENDRA CONSTRUCTION L11 | tulsani associates L8 | M/S Sharvi Construction L6 | SARATH ENTERPRISES L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | B&R PORTION
Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each complete all as specified and as directed.
(Note : Contractor's quoted rate shall deemed to be inclusive for making good disturbed portion if any & nothing extra will be admissible on this account.) | 44 | EACH | 197 ₹8,668 | 150 ₹6,600 | 50 ₹2,200 Lowest | 85 ₹3,740 | 250 ₹11,000 | 150 ₹6,600 | 300 ₹13,200 | 101 ₹4,444 | 250 ₹11,000 | 200 ₹8,800 | 360 ₹15,840 |
| 2.00 | Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed.
(Note : Contractor's quoted rate shall deemed to be inclusive for making good disturbed portion if any & nothing extra will be admissible on this account.) | 8 | EACH | 249 ₹1,992 | 350 ₹2,800 | 50 ₹400 Lowest | 95 ₹760 | 300 ₹2,400 | 200 ₹1,600 | 400 ₹3,200 | 151 ₹1,208 | 300 ₹2,400 | 200 ₹1,600 | 450 ₹3,600 |
| 3.00 | S&F MS framed work such as grills grating, framed Guard bars, barred iron doors, ladders, frame work for securing water tank, and similar work and for frames of windows chajjas, drain cover gratings and cooler platforms at windows etc confirming to Fe-290, Gde-E-165 complete all as specified and directed. | 300 | KG | 80 ₹24,000 Lowest | 135 ₹40,500 | 110 ₹33,000 | 100 ₹30,000 | 97 ₹29,100 | 120 ₹36,000 | 105 ₹31,500 | 112 ₹33,600 | 150 ₹45,000 | 102 ₹30,600 | 93 ₹27,900 |
| 4.00 | S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 177 of SSR 2020 Part-II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS butt hinges complete all as specified and directed. | 12 | SQM | 4,200 ₹50,400 | 4,775 ₹57,300 | 3,200 ₹38,400 | 3,200 ₹38,400 | 2,600 ₹31,200 | 3,600 ₹43,200 | 2,700 ₹32,400 | 3,600 ₹43,200 | 4,000 ₹48,000 | 2,200 ₹26,400 Lowest | 2,700 ₹32,400 |
| 5.00 | S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50mm x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2004 Part 11 complete all as specified and directed. | 47 | RM | 600 ₹28,200 | 575 ₹27,025 | 290 ₹13,630 Lowest | 500 ₹23,500 | 450 ₹21,150 | 600 ₹28,200 | 385 ₹18,095 | 410 ₹19,270 | 400 ₹18,800 | 380 ₹17,860 | 450 ₹21,150 |
| 6.00 | S&F three track sliding window with two or more shutter with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make (to be approved by GE) including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc. complete all as specified and directed by Engr-in-Charge.
(a) Bottom frame - 20620
(b) Top frame & vertical - 20621
(c) Handle (side) - 20606
(d) Shutter inter lock - 20724
(e) Shutter top & Bottom - 20844
(f) Glazing clips - 19352. | 60 | SQM | 5,200 ₹3,12,000 | 3,150 ₹1,89,000 | 3,100 ₹1,86,000 Lowest | 3,350 ₹2,01,000 | 3,400 ₹2,04,000 | 6,300 ₹3,78,000 | 3,500 ₹2,10,000 | 5,000 ₹3,00,000 | 6,000 ₹3,60,000 | 3,100 ₹1,86,000 Lowest | 3,150 ₹1,89,000 |
| 7.00 | S&F louvered glass ventilators using and including 5mm thick frosted / pin headed glass and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make (to be approved by GE) and including necessary jointing cleats, glazing clips, screws, rubber beading etc complete all as specified and directed.
(a) SP - 20048
(b) Glazing clips - 19352. | 2 | SQM | 5,200 ₹10,400 | 3,150 ₹6,300 | 2,600 ₹5,200 | 3,300 ₹6,600 | 2,200 ₹4,400 | 810 ₹1,620 Lowest | 3,000 ₹6,000 | 2,500 ₹5,000 | 4,500 ₹9,000 | 2,600 ₹5,200 | 2,400 ₹4,800 |
| 8.00 | S&F 150 mm extruded aluminium alloy handles, fabricated type complete all as specified and directed. | 16 | EACH | 88 ₹1,408 | 113 ₹1,808 | 75 ₹1,200 | 85 ₹1,360 | 65 ₹1,040 Lowest | 110 ₹1,760 | 90 ₹1,440 | 90 ₹1,440 | 150 ₹2,400 | 65 ₹1,040 Lowest | 99 ₹1,584 |
| 9.00 | S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed for PVC shutters complete all as specified and directed. | 16 | EACH | 76 ₹1,216 | 113 ₹1,808 | 75 ₹1,200 | 75 ₹1,200 | 65 ₹1,040 Lowest | 150 ₹2,400 | 65 ₹1,040 Lowest | 95 ₹1,520 | 150 ₹2,400 | 65 ₹1,040 Lowest | 96 ₹1,536 |
| 10.00 | S&F 100mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. | 48 | EACH | 88 ₹4,224 | 54 ₹2,592 | 30 ₹1,440 Lowest | 45 ₹2,160 | 35 ₹1,680 | 80 ₹3,840 | 45 ₹2,160 | 55 ₹2,640 | 100 ₹4,800 | 50 ₹2,400 | 36 ₹1,728 |
Tender Value
₹1.4 Cr
EMD Value
₹2.1 L
Closing Date
17 Sept 2025, 6:00 pmClosed
COMMANDER WORKS ENGINEER PUNE
HEADQUARTERS COMMANDER WORKS ENGINEERS GEN CARIAPPA MARG, PUNE-411 001
86207 SPL REPAIRS TO CEILING, FLOORING, JOINERY, INTERNAL WIRING PARTITION AND FINISHES OF BLDG NO. ET-18 AND 19 OF AFSMC PUNE AND SPL REPAIRS TO BLDG NO. T-32, T-33 AND T-34 AT 13 EW BN UNDER GE (CENTRAL) PUNE
2025_MES_725958_1
86207 CWE PUNE
Open Tender
Civil Works
Item Rate
180 days
GE (CENTRAL) PUNE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹1,000
GE (CENTRAL)
₹2.1 L
Yes
31 Oct 2025
13 Aug 2025
24 Sept 2025
13 Aug 2025
17 Sept 2025
3 Sept 2025
13 Aug 2025 - 19 Aug 2025
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .