E-tender For Fresh HT Power Supply at 22 kV level Electrical vehicle Charging Station at Plot No 1606 To 1620 Nr. Sai Legend World, Nr. Shahad Station, Ulhasnagar-1

Amount

Supplying, erecting, testing, commissioning 22 KV HT metering cubical (compact type) approved by MSEDCL/licensee fabricated with 2mm.(14 SWG) M.S. sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25x6 mm electronic security lock and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover ( CT,PT cover) interlock with meter doors, epoxy coated 3 nos CT having required ratio between 50/5 A to 100/5 A, VA10, class 0.2S, 22000/V3/110/V3 VA 50, class 0.2 epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc. complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation. Make :As Per MSEDCL Approved

Supplying , erecting & terminating 3 x 95 sq. mm. aluminium 22 kV(E), XLPE armoured cable on wall/ceiling or laid in provided trench / pipe in an approved Make :Vishal/Polycab/Finolex

Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material Make :As Per MSEDCL Approved

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm Make :As Per MSEDCL Approved

Providing and erecting Heat shrinkable straight through joint kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material Make :As Per MSEDCL Approved

Supplying and erecting 22 kv air circuit breaker manually operated Non drawout type of 1250A rated at 50º C without deration, 500V, 3 pole having short circuit rating 50 kA (Ics=Icu=Icw for 1s), with standard accessories and thermal magnetic release Make :As Per MSEDCL Approved

Supplying and erecting rolled steel joist (girder) pole 152 x 152 mm (37.1 kg/m) with provided base plate in provided foundation Make :As Per MSEDCL Guideline

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose) Make :As Per MSEDCL Guideline

Supplying and erecting HT earthing set with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials Make :As Per MSEDCL Guideline

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results Make :As Per MSEDCL Guideline

Supplying and erecting aluminium strip of required sizes .used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint in an approved manner with joints required Make :As Per MSEDCL Guideline

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. Make :As Per MSEDCL Guideline

Supplying and erecting vee cross arm with ISM channel of 100 x 50 x 6mm or 22/ 33kV HTOH line with arrangement to fix insulator at 45mm from the end & horizontal distance between insulators 1530 mm bent at angle of 60 degree keeping base 310 mm and the total vertical height of V cross arm as 460mm, and fixed on pole with MS clamp of 80x10 mm, nut bolts, washers complete Make :As Per MSEDCL Guideline

Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/8 SWG, G.l. stay rod 20 mm x 1.8 m length and pole clamps duly erected in provided cement concrete foundation. Make :As Per MSEDCL Guideline

Supplying and erecting pole clamp made from 50 x 6 mm MS flat for pole or pipe, post complete erected with 15 mmbolts and nuts, complete duly painted with one coat of red oxide and two coats of aluminium paint Make :As Per MSEDCL Guideline

Supplying and erecting porcelain pin type insulator suitable for 22kV line with G.I. pin complete Make :As Per MSEDCL Approved

Supplying & erecting 100 x 50x6 mm with 4.7 mm thick web and 7.5 mm thick flange channel iron cross arm of suitable length for 2.4m wide DP structure and erecting on DP with 50x6 mm clamp as per approved method of construction and complete Make :As Per MSEDCL Guideline

Supplying and erecting porcelain disc type insulator with necessary hardware suitable for 22kV line, Make :As Per MSEDCL Approved

Supplying and erecting GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner Make :As Per MSEDCL Guideline

Supplying and erecting distribution class, 22 kV thyrite type lightning arresters with nut bolts, on provided MS channel Make :As Per MSEDCL Approved

Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete Make :As Per PWD Guideline

Supplying and erecting RCC chamber cover with frame 60cmx 45cm medium duty 100kg with lifting arrangement including laying of angle iron frame of angle size as 50 x 50 x6 mm to be fixed / embedded on top of chamber complete Make :As Per PWD Guideline

Ms Malhar Electric Works

UNISON ELECTRICALs