Work of upgradation of pumpset and its allied works at Kodichikkanahalli pump house coming under AEE (BWPS)-2-3 subdivision

Work of upgradation of pumpset and its allied works at Kodichikkanahalli pump house coming under AEE (BWPS)-2-3 subdivision

Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS 7...

Pipe bends,branches, tail pieces, reducers etc. for above 500mm dia pipes ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Providing and fixing Steel work in built up tubular round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge --...

Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 m² and upto 16.80 m² in the area including cost of materials, labour, usage charges of...

Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as pe...

Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer in charge, area of grill to be measured including cost of mat...

Providing and fixing T iron frames for doors, windows and ventilators of mild steel Tee sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming ...

Providing and fixing M.S. rivets of sizes in position including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge ---...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

75 x 150 x 75 x 6 mm C channel ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Providing and fixing corrugated G.S. sheet roofing including vertical or curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or wi...

Extra for circular cutting in C.G.S. sheet roofing for making opening of area exceeding 40 sq. decimeter: 0.63 mm thick ---- All the rates are exluding GST. tenderer should quote the rates excluding G...

Providing and fixing valleys of 90 cm wide overall in plain G.S. sheet fixed

with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and

bitumen washers complete as per design drawing...

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 Cumin volume and stock piling at designated locations and disposal of dismantle...

Dismantling of kerb stones by mannual means ansd disposal of dismantled materials with all lead and lifts ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Earth work excavation by manual means for drains, canals, waste weir, draft,

approach channels, key trenches, foundation of Buildings and bridges and such

simillar works in all kinds of soils, as pe...

Depth exceeding 1.5m, but not exceeding 3 m equal13*9*1.5 ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

hard rock blasting prohibited Depth upto 1.50 m ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Dewatering Pump 10 HP ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Providing, filling and laying of sand bags filled with sand or clay for diversion of sewage during execution of work. ---- All the rates are exluding GST. tenderer should quote the rates excluding GS...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite ortrap orbasalt crushed graded coarse

aggregates and fine aggregates as per relevant IS...

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...

Supply and placing the Design Mix of M 30 Grade for Self Compacting Concrete corresponding to IS 456 2000 Re affirmed 2021 and relevant IS codes using Batching plant, Transit mixer and concrete pump...

Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping orwelding joints, ...

Filling approved earth excluding rock in trenches, plinth, sides of foundations

and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and...

Mobile Hydraulic Crane 5 t capacity ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg orCum and minimum compressive strength of 4.00 N ormm2 conforming to...

Providing 15 mm cement plaster with cement mortar 1:3 1 cement: 3 coarse sand finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...

Providing 20 mm cement plaster with cement mortar 1:3 1 cement: 3 coarse sand finished with a floating coat of neat cement to brick or stone masonry including rounding off corners wherever required ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing White washing with lime to give an even shade :New work three

coats with lime of approved quality, including cost of materials, labour

complete as per specifications and as per direction...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work two coats over and including water thinnable priming coat with cement primer after th...

Finishing walls with textured exterior paint of required shade :New work

Two coats applied at 3.28 L or10 m² over and including priming coat of

exterior primer applied at 2.20kg or10 m² to give ...

Providing and laying 52 mm thick cement concrete flooring with concrete

hardener topping, under layer 40 mm thick cement concrete 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomi...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber or neoprene gasket etc. complete as per the architectural drawings and the directions ...

Filling the gap in between aluminium or stone or wood frame and adjacent RCC orBrick or Stone or wood or Ceramic or Gypsum work by providing weather orstructural non sag elastomeric PU sealant over ba...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections or appropriate sections and other sections of approved make conformi...

Providing and fixing chromium plated brass night latch of approved quality

including necessary screws etc. complete. ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Providing and fixing chromium plated brass handles of 100 or125 mm with

necessary screws etc. Complete ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Supply of brand new horizontally spilt case horizontal mounting type centrifugal pump with bronze impeller and capable of pumping filtered water contain 1 PPM suitable for coupling to motor on a commo...

Supply of 1480Rpm,125HP, duty S1, Induction motor horizontally mounting type screen protected drip proof with class B insulation for continuous duty squirrel cage induction motor capable to drive the...

Accessories like Base Frame , Coupling, Foundation bolts, Pressure guages both on delivery and suction side of pump for Each pump and other accessories etc. ---- All the rates are exluding GST. tender...

11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT and 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem and 2 No of Meters for 3 Phase 4 Wire Mete...

Erection of HT metering Cubicle on Platform ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Load Break Switch with Panel ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Supply of 11KV VCB panel consist of 1 incoming and 2 outgoing, outdoor type and floor mounted, cable entry bottom for BTM with transformer protection relay 2 nos ---- All the rates are exluding GST. t...

Erection and commissioning of 11KV VCB panels for the said locations ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Distribution Transformer - 3 Phase, 11kV/433V - Amorphous Core with Oil as per IS-1180 (Part-1): 2014,CABLE ENTRY TYPE

500 kVA, Aluminium Wdg, Star 2 (5 Star) ---- All the rates are exluding GST. ten...

Supply of 400A LT panel, consist of 400A ACB incomer, 400A phase changeover switch, 3 nos 250A outgoing feeder to motor, 250A load selector switch, 3nos 100A outgoing feeder, 6nos 32A outgoing MCB, 3n...

Supply of upto 150HP Digital soft starter consist of Motor protection relay, undervoltage, over voltage, phase reverse, under current, over current protections, floor mounted and cable entry bottom, i...

Supply erection and commissioning of 75KVAR APFC panel and its allied works ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Erection and commissioning of pumpsets suitable for the negative suction ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Erection and commissioning of LT panel and starter 3 nos ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Electrical operated 450mm dia DI sluice valve PN.16, along with 415V Actuator suitable for automation control ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Electrical operated 300mm dia DI sluice valve PN.16, along with 415V Actuator suitable for automation control ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Electrical operated 200mm dia DI sluice valve PN.16, along with 415V Actuator suitable for automation control ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Providing and fixing of Single or Double chamber triple function tamper proof Both the orifces to be housed in the single chamber Air valves with Body and cover in Ductile cast iron of grade GGG 40 ...

Providing and fixing of ductile iron double flanged swing check valves with slanted seat or with lever weight with straight disc, with metallic corrosion proof and wear resistant seat faces with nicke...

Providing, fabricating and fixing at site various diameter MS MJ ends to suit CI or DI pipe as per the sketch . The cost is inclusive of all materials, i.e, rubber 'O' rings, flanges, bolts and nuts,...

For CI or DI pipes of 450mm dia ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Flanges of 200mm dia and 20mm thick. ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Flanges of 300mm dia and 20mm thick. ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts ornuts and washer or welding as required. 150 x 50 mm ---- All the rates are exluding GST. tenderer shoul...

300 x 50 mm ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Caution orDanger Board ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Fixing of Danger Board ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Supplying of first aid box. Complete ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Supplying of two bucket stand alongwith buckets. Complete ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Supplying of Hand gloves. Complete ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Supplying of FIRST AID CHART with lamination. Complete ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Supplying and installation of RUBBER MAT 1mtr x 1mtr 1Omm thick. complete including cost of materials, labour, usage charges of machinery

complete as per specifications. ---- All the rates are exludi...

Supply and installation of 2kg Stored Pressure Type, Pressure Guage, Gross Weight 4.9 Kg, empty weight 2.9 Kg, Can Height 440 MM, Diameter 140 MM, Discharge Time less than 9 Sees, Controllable dischar...

Carbondioxide Type,22.5 kg ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

11 kV, 3 Core, XPLE HTUG Cable withpressure extruded inner sheeth, ROUNDWIRE ARMOURED as per IS 7098 Part 2 Armouring wires dia and Resistivity as per IS 3975 ---- All the rates are exluding GST. ten...

Laying of cable in Existing Trench orGI pipe orStone Ware orRCC Hume pipe using Wooden orAluminum Rollers as directed by the departmental staff ---- All the rates are exluding GST. tenderer should quo...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath

Armoured LTUG Cable as per IS 1554 Part1 or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975

70 Sqmm, 3.5 Core, 18 GI Strips 4 x 0.8 mm ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

25 Sqmm, 4 Core, 13 GI Strips 4 x 0.8 mm ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Laying of cable in Existing Trench orGI pipe orStone Ware orRCC Hume pipe using

Wooden orAluminum Rollers as directed by the departmental staff

2.5 to 25 Sqmm ---- All the rates are exluding GST. ten...

35 to 95 Sqmm ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

120 to 240 Sqmm ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Providing M Sand : Supplying and filling in plinth, foundations or UG cable work with approved M sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, ...

Heavy Duty Copper Terminal Long Barrel

25 Sqmm Copper Terminal, Apprx Wt: 11 Gm ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Installation of Pre Insulated Lug CPTAU for 25 Sqmm ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

70 Sqmm Copper Terminal, Apprx Wt: 38 Gm ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Installation of Pre Insulated Lug CPTAU for 70 Sqmm ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

150 Sqmm Copper Terminal, Apprx Wt: 98 Gm ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Installation of Pre Insulated Lug CPTAU for 120 Sqmm ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Full Threaded Bolt and Nut as per IS 1367 GI 16x50 mm ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Earth work excavation for pipelines orcables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ligh...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130 1984 and Virgin PVC insulation sheathed suitable for work...

GI orCopper strips for grounding connections, using necessary fixingmaterials as required.50 x 6 mm GI strip ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

GI orCopper strips for grounding connections, using necessary fixingmaterials as required.50 x 6 mm copper strip ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

GI orCopper strips for grounding connections, using necessary fixingmaterials as required.600 x 600 x 3 mm GI Plate ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

GI orCopper strips for grounding connections, using necessary fixingmaterials as required.600 x 600 x 3 mmCopper Plate ---- All the rates are exluding GST. tenderer should quote the rates excluding GS...

GI Grounding pipe, B Class, 42 mm dia, 2.5 Mtr long,

3.2 mm thick with bolt, nut, GI Strips and washer

completeMinimum Weight of GI Pipe: 7.3 Kg. ---- All the rates are exluding GST. tenderer shou...

Good Quality well burnt Charcoal for grounding

purposes packed in non returnable gunny bag of 30 Kg

Each. ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Supply and installation of level transmitter with remote Digital indictor with 4 20mA digital output for the automation for the GLR ---- All the rates are exluding GST. tenderer should quote the rat...

Supply and installation of Digital Pressure transmitter for the pump ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Supply and installation of Pressure guarge with digital output for the pump ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

supply and installation of Scada based control panel for the pump operations and valve control and data storage etc ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Supply and installation of CCTV with 30days storage facility for the pump house ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

2 kVA Online UPS 230 V AC, 1 phase, 50 Hz UPS with Battery ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Wiring, Installation, Testing and Commissioning of UPS with batteries and cables ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Copper Control orCommunication Cable for SCADA

10C x 1.5 Sq mm multistrand, conforming to KPTCL specification ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

EQUIPMENT FOR ESTABLISHING SCADA COMMUNICATION :

Remote Terminal Unit RTU , 64 I orO Port ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Remote Console equivalent to Workstation console ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Ethernet Switch Managed level ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Industrial Grade PC with latest specification ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

HMI Monitor : 29 ---- All the rates are exluding GST. tenderer should quote the rates excluding GST

Operation and maintenance of the pump house with 1 no qualified technicians and 1 helper, 6 months x 3 shifts ---- All the rates are exluding GST. tenderer should quote the rates excluding GST