Loading…
Loading…
Tender Value
₹2.6 Cr
EMD Value
₹2.8 L
Closing Date
13 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
BRIDGE
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Non submission of the documents shall lead to summarily rejection of the offer.
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfillment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Any Civil Engineering survey or consturction work.
11 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Indian Railways Standard General Conditions of Contract, April 2022 (IRGCC, April 2022) with correction slips issued up to date of inviting tender will be applicable for this tender.
As per Advance Correction Slip No. 5 dated 20.10.2023 "The Original Bank Guarantee should be delivered in person in this office (i.e in Receive and Dispatch Section of DRM office, Engineering Branch, West Central Railway, Jabalpur) before closing date for submission of bids (i.e. excluding the last date of submission of bids).
Jabalpur Division: - Proposed preparation of DPR/Technical feasibility, bore hole details and for collection all data required for works on various section in Jabalpur division.
DRMW-JBP-25-2026~WCR
DRMW-JBP-25-2026
Open
Works - General
24 Months
Jabalpur, Madhya Pradesh
₹0
₹2.8 L
13 Mar 2026
17 Feb 2026
27 Feb 2026
27 items across 3 schedules · ₹55,39,752 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 0m to 10m | Metre | 1620.00 1271.04 | 20,59,084.8 | — |
| 2 | 10m to 20m | Metre | 1620.00 1221.54 | 19,78,894.8 | — |
| 3 | 0m to 10m | Metre | 1080.00 3148.17 | 34,00,023.6 | — |
| 4 | Plate size 30cm x 30cm | Each | 54.00 27204.29 | 14,69,031.66 | — |
| 5 | Plate size 45cm x 45cm | Each | 54.00 27985.64 | 15,11,224.56 | — |
| 6 | Plate size 60cm x 60cm | Each | 54.00 33337.39 | 18,00,219.06 | — |
| 7 | Taking out 100mm dia. & 450mm long undisturbed samples of soil from bore holes, including provision of air tight containers for packing and, labeling incl. transporting the samples to laboratory. Piston sampler shall be used for extracting undisturbed samples where necessary. Samples shall be collected as per IS:2720. | Each | 1080.00 151.19 | 1,63,285.2 | — |
| 8 | Taking out 100mm dia. & 450mm long disturbed samples of soil from bore holes, including provision of air tight containers for packing, labeling and transporting the samples to laboratory. Samples shall be collected as per IS:2720. | Each | 1890.00 133.79 | 2,52,863.1 | — |
| 9 | Conducting standard penetration test as per IS:2131 at approximate1.5m intervals in bore holes, as directed by the Engineer in charge | Each | 2970.00 769.31 | 22,84,850.7 | — |
| 10 | Moisture Content/Dry Density | Each | 1620.00 334.48 | 5,41,857.6 | — |
| 11 | Atterberg Limits | Each | 1620.00 802.76 | 13,00,471.2 | — |
| 12 | Specific Gravity | Each | 1620.00 564.61 | 9,14,668.2 | — |
| 13 | Grain size analysis including Hydrometer analysis | Each | 1620.00 706.43 | 11,44,416.6 | — |
| 14 | Direct Shear Test | Each | 810.00 2258.44 | 18,29,336.4 | — |
| 15 | Natural Density | Each | 1620.00 735.87 | 11,92,109.4 | — |
| 16 | Tri-axial Test | Each | 1620.00 3300.69 | 53,47,117.8 | — |
| 17 | Density Test | Each | 540.00 1159.99 | 6,26,394.6 | — |
| 18 | Water Absorption & Porosity | Each | 540.00 726.50 | 3,92,310 | — |
| 19 | Hardness | Each | 540.00 544.54 | 2,94,051.6 | — |
| 20 | Unconfined Compression Test | Each | 540.00 2163.45 | 11,68,263 | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocument.pdf
ATTACHMENT
SGCCApril22ACSNo.8910.pdf
ATTACHMENT
Splcond.LetterofCredit.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
DPRSpecialConditions.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .