PERIODICAL SERVICES TO VARIOUS BUILDINGS AND CERTAIN REPAIR WORKS TO ROOF, FLOORING, PLINTH PROTECTION ETC AT ZONE C AREA UNDER AGE(I) NAVY CHENNAI

Amount

M&L Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of white wash complete all as specified and directed.

M&L Preparation of old decorated/ plastered or unplastered ceiling surfaces and applying one coat of white wash complete all as specified and directed.

M&L Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of colour wash complete all as specified and directed.

M&L Preparation of old decorated wood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparation of old decorated steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enammel paint complete all as specified and directed.

M&L Preparation of old decorated/ plastered or unplastered wall over 10 cm grith or width surfaces any applying one coat of Synthetic enamel paint complete all as specified and directed.

M&L Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of cement base paint complete all as specified and directed.

M&L complete removal & prepartion of existing treatment and finishing walls with two coats of BERGER - WALMASTA EMULSION or equivalent as per particular specification as approved by AGE(I) on exterior surfaces of approved colour over a coat of primer complete all as specified and as directed.

Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc.

M&L rendering for 10mm thick in cement mortar (1:6) on other than fair faces of internal bricks or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 15 mm thick in two layers 10 mm thick backing coat in cm 1:6 and 5mm thick finishing coat in cm 1:4 mixed with water proofing @ 2% by weight of cement with rough cast plasters finshes. (Note :- WPC will be measured separately).

M&L rendering 5mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement.

M&L for rendering 15 mm thick in two layers 10 mm thick backing coat in cm 1:6 and 5mm thick finishing coat in cm 1:4 . mixed with water proofing @ 2% by weight of cement finished even and fair. (Note :- WPC will be measured separately).

M&L Preparing newly plastered surfaces of celings and applying three coats of white wash.

M&L Preparing newly plastered surfaces of Walls and applying three coats of white wash.

M&L for preparing of newly plastered surfaces and applying two coats of BERGER-BISON emulsion or equivalent as per particular specification as approved by AGE(I) on interior surfaces over coat of primer on surfaces of walls including wall care putty complete all as specified.

M&L applying two coat of BERGER-WALMASTA EMULSION or equivalent as per particular specification as approved by AGE(I) on exterior surfaces of approved colour over a coat of primer on newly plastered or unplastered wall surface including preparation of surface, complete all as specified.

Demolition cement concrete (unreinforced) in ground floors and paving n.exc 15cm thick (below & above ground level)

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing/pavings/plinth protections.

Taking down rain water pipe and sewage pipe of any size of pattern including all fittings, heads, shoes, bends etc.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft / loose soil.

S&F for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or floors

S&F for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or floors

S&F for 75mm dia bore PVC (SWR) branch piece, single (Single 'Y') equal or unequal with access door

S&F in repairs for 110mm dia bore PVC (SWR) branch piece, single (Single 'Y') equal or unequal with access door

S&F in repairs for 75mm dia bore PVC (SWR) junction single, (Single 'T') equal or unequal with access door

S&F in repairs for 110mm dia bore PVC (SWR) junction single, (Single 'T') equal or unequal with access door

S&F for 75mm dia bore PVC (SWR) bends any radius.

S&F for 110mm dia bore PVC (SWR) bends any radius

S&F for 110mm dia bore PVC (SWR) vent cowl.

S&F for 75mm dia bore PVC (SWR) vent cowl.

Taking up or down steel tubing 20mm dia bore and connection complete all as specified

Taking up or down steel tubing 25mm dia bore and connection complete all as specified

Taking up or down steel tubing 40mm dia bore and connection complete all as specified

Cutting chases, pinning in, for concealed water tubing on brick walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified and directed.

S&F GI tubing medium grade 20mm bore with all fitting and fixing complete all wall, or laid in floor.

S&F GI tubing medium grade 25mm bore with all fitting and fixing complete all wall, or laid in floor.

S&F GI tubing medium grade 40mm bore with all fitting and fixing complete all wall or laid in floor.

S&F in repairs Gun metal 40 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed.

S&F in repairs Gun metal 25 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed.

S&F in repairs Gun metal 20 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed.

S&F in repairs Gun metal 15 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, waste coupling and downpipe of 40mm dia and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding , low level flushing cistern and Flush pipe of 32mm dia but including seat cover)

S&F in repair vitreous china squating pan "Orissa" patern size 580 x 440mm white with 'P' or 'S' trap front or back inlet with integral foot rest (excluding flushing cistern and flush pipe), squating pan including connection to trap and flushing pipe, anit syphonic pipe etc complete incl making good to floor.

S&F in repairs PVC valve less flushing cistern low level 10 litres capacity with syphonic action type with inlet ball valves, float and handle and connections to pipes and fixing of chain and pull (or) lever including brackets and 32mm dia PVC flush pipe of 60cm long complete all as specified.

S&F in repairsVitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe)

S&F in repair vitreous china, wash hand basin white flat back size 550 x 400 mm white complete waste, downpipe coupling of 32 mm dia, chain and pug and precelain stopper including bracket.

S&F in repairs plastic water closet seat cover white/closed pattern with flat bottom and cover and MS CP or aluminum hinges device all as specified and directed by Engineer-in-Charge,

S&F Brass CP mixer of 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repair bib taps concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipes of 15mm bore.

S&F in repairs two way bib cock, CP, Fancy type - 15mm dia,

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair Stop valves fancy type,chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore.

S&F in repairs stop cock concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore.

S&F in repair Brass chromium plated shower rose 125mm size, including shower arm with or without swivel joints,complete all as specified and directed.

S&F fancy type pillar tap 15mm dia, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut screwed for iron pipe & fixed in repairs.

S&F in repairs 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipes or connections including necessary packing union and cap.

S&F only 32mm waste fittings brass of chromium plated for wash basin etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and fixed.

S&F for 32 mm bore High density polythylene pipes (HDPE) of pressure rating 6Kgf/cm2 fixed compete to in walls, floors,ceilings etc

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repair of PVC (SWR) multiple Floor trap of 75 mm outlet plain with grating including jointing with solvent cement.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repairs soap dish, vitreous China white, approximate size 160x 160x90mm

S&F in repairs Brass Chromium Platedl Tubular towel rail , 20mm dia, 60cm long between flanges

S&F grating doom 125 mm dia with waste hole of PTMT (Min weight 40 gms)

S&F in repairs PVC internal fittings (kit) complete for flushing cistern , all as specified and directed by Engineer-in-Charge.

S&F in repairs flush handle for low level flushing cistern all as specified and directed

Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe etc of tank capacity exceeding 1000 Ltrs and not exceeding 2000 Ltrs including writing " CLEANED ON DD/MM/YYYY " complete all as specified and directed.

S&F in repairs Ball brass valves of 40mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repairs

Supply only spindles of brass of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as directed by Engineer-in-Charge, Make : ISI marked.

Checking and attending to water leakage from taps WCs, flushing cistern, urinals, wash basins bottle traps etc and any obstruction to water supply requiring plumber work and carry out minor repairs such like replacement of washers, check nuts, tightening of fittings, adjustment of float valves and syphon fittings of flushing cistern, cleaning of bottle traps etc including cost of petty materials like washers of all size, safeda, thread (soot), M-seal, screws, nails to make it functional and leak proof all as specified and directed by Engineer-in-Charge (Note : If spindle is to be replaced the same will be measured and paid at supply only rates)

Removing plants/herbs grown on walls/junctions with roots using herbicide chemicals and of existing brick and concrete in high raised building at any storeyed and making good the disturbed surfaces as per existing complete all as specified and directed.

M&L for Clearing the blockage in the water closets of any type completly preferably by manually means to enable the flush water to flow freely to the manholes,all as specified and directed by Engineer-in-Charge

M&L for clearing the blockage of WHB, bottle trap, urinal, sink etc by manually/mechanically and removing blockage from entire system and making it fully functional all as specified and directed by Engineer-in-Charge.

Demolition of Reinforced cement concrete (Reinforcement cut as required) of any description and in any position not otherwise specifically provided including padding concrete on roof all as specified and directed.

M&L for Repair to broken/rusted RCC work such as fascia of roof slab, ceiling, chajjas, columns, beams etc upto required thickness with 'Ready Mix Reinforced acrylic fibre' cementitious mortar material (micro concrete) after cleaning & removing loose particles, grease, oil or other materilas, applying 'epoxy zinc primer' over cleaned reinforced steel and providing a steel reinforcement cage covered with fibre mesh all as per manufacturer's instructions and finished the surfaces fair and smooth for building upto (G+2) stories including necessary scaffolding complete all as specified. Make : M/s Dr Fixit (Pidilite), Fosroc, Berger Paints or equivalent as approved by AGE(I)

S VENKATESAN