Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.6 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹19.8 L+₹1.4 L (7.56%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹20.1 L+₹1.7 L (9.10%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹25.4 L+₹7.1 L (38.3%)Rejected-Finance AT POST ARANGAON MEHERABAD TAL DIST AHMEDNAGAR PIN 414006 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414006 | L4 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
13 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D GIRINAGAR PUNE 411025
GE I R AND D GIRINAGAR PUNE 411025
DAY TO DAY MAINT FOR MARRIED AND OTM ACCN AT VRDE AHMEDNAGAR
2023_MES_628633_1
GE I R AND D GNR TOKEN 65 OF 2023-24
Open Tender
Civil Works
Works
270 days
GE I R AND D GIRINAGAR PUNE 411025
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE I R AND D GIRINAGAR PUNE 411025
₹60,000
27 Apr 2024
17 Nov 2023
15 Dec 2023
17 Nov 2023
13 Dec 2023
30 Nov 2023
17 Nov 2023 - 22 Nov 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
M & L coloured glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces as backing coat complete all as specified and directed.
M& L for vetrified coloured (Dark shade) ceramic tiles 9 to 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
M& L for vetrified coloured (Dark shade) ceramic tiles 9 to10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting/dado on wall surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 as backing coat complete all as specified and directed.
Taking down cement or cement lime plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing with water etc of any description complete all as specified and directed.
M & L for rendering 15 mm thick in cement plaster on brick or concrete surfaces of wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 10 mm thick in cement plaster on brick or concrete surfaces of ceiling in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M & L for preparation of newly prepared plastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.
M & L for preparation of newly prepared plastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortor including all quoins, arches, pillars etc but excluding ashlar facings and dressed stone work all as specified and directed.
M&L brick work with sub class ‘B’ class straight or curved or plan exc 6 m mean radius built in cm (1:6) all as specified and directed
M&L rendering 15 mm thick in cement plaster in CM (1:4) finished even and smooth without using extra cement on brick or concrete surface all as specified and directed
M & L for preparation of newly prepared surfaces of walls and applying two coats of oil bound distember over a coat of primer complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.00 sqm in each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm in each complete all as specified and directed.
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm in each complete all as specified and directed.
Resecuring or easing & adjusting without taking down shutters of any description exc 1.00sqm and n exc 2.00 sqm each, including removing the shutter, making good and refixing in the same opening with using necessary bolting, hinges and welding as per site requirement complete all as specified and directed.
Resecuring or easing & adjusting without taking down shutters of any description n,exc 1 sqm each, including removing the shutter, making good and refixing in the same opening with using necessary bolting, hinges and welding as per site requirement complete all as specified and directed.
S & F for second class hardwood (SAL) plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S & F for 35 mm thick factory made second class hard wood glazed and skeleten shutters, open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR part- I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.
S & F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F 35 mm thick second class hard wood plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed.
S & F factory made single extruded WPC (Wood Polymer Composite) solid door/window Ceosetory windows and other frames/chowkats of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder, rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, moulded of elasticity 900 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (MS hold fast/lugs/SS dash fasteners shall be paid for seperately). Note : For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e, depth and width of profile shall be acceptable. Variation of profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutters of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge. Note : Stainless steel butt hinges and necessary SS screws shall be paid seperately.
S & F for butt hinges, medium weight, cold rolled of stainless steel of size 100 mm complete all as specified and directed.
S & F in repairs for butt hinges, medium weight, cold rolled of stainless steel of size 100 mm complete all as specified and directed.
S & F 150 mm long aluminium, anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & Fixed in repairs 150 mm long aluminium, anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & Fixed in repairs 200 mm long aluminium, anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F for 300 mm long stainless steel, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.
S & Fixed in repairs for 300 mm long stainless steel, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.
S & F extruded aluminium alloy handles, fabricated type anodised of 150 mm size complete all as specified and directed.
S & Fixed in repairs extruded aluminium alloy handles, fabricated type anodised of 150 mm size complete all as specified and directed.
Supply only integral water proofing compound of approved make complete all as specified and directed.
S & Fixed in repairs floor door stopper 140 mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S & Fixed in repairs continuous (piano) hinges, stainless steel bright finish or electro galvanised width of flaps (when open) 30 mm complete all as specified and directed.
S & Fixed in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of stainless steel fancy type, polished complete all as specified and directed.
S & Fixed in repairs Hasp and staple 150 mm size, safety type aluminium, with stainless steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & Fixed in repairs door closer aluminium extruded section body, hydraulically regulated, design No 2 universal type, suitable for door shutters 701 to 850 mm width and weight between 36 to 60 kgs and fixed complete all as specified and directed.
S & Fixed in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S & F bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates , hook and pintle hinges large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Grade-E-165 complete all as specified and directed.
S&F in repairs stainless steel kitchen trolleys including self closing SS hinges, shutter doors of 19mm thick coloured prelaminated particle board both side laminated of approved quality fixed in position including rollers,handles pull grip type etc. all as specified and directed.
Taking up or down 15 mm dia bore steel tubings and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20 mm dia bore steel tubings and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S & F for 15 mm dia bore galvanised steel tubes, medium grade with & including all fittings for water supply pipes etc complete fixed to wall and ceiling or laid in floors complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (walls, ceilings, floors etc) of 15 mm dia bore complete all as specified and directed.
S & F for 20 mm dia bore galvanised steel tubes, medium grade with & including all fittings for water supply pipes etc complete fixed to wall and ceiling or laid in floors complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (walls, ceilings, floors etc) of 20 mm dia bore complete all as specified and directed.
S & Fixed in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, over all size 495 mm x 420 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S & Fixed in repairs sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, over all size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S & Fixed in repairs vitreous china wash basin, angle back of size 600 x 480 mm white, excluding taps, waste, chain and plug and porceilin stopper but including brackets complete all as specified and directed.
S & Fixed in repairs vitreous china urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
S & Fixed in repairs 32 mm bore dia waste coupling of PTMT (half or full threated) Minimum weight 32 mm - 45 gms complete all as specified and directed.
S & Fixed in repairs 40 mm bore dia waste coupling of PTMT (half or full threated) Minimum weight 40 mm - 60 gms complete all as specified and directed.
S & Fixed in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.
S & Fixed in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm long complete all as specified and directed.
S & Fixed in repairs vitreous china wash down water closet pan complete including fixing (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.
S & F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
Dismantling water tanks exc 250 ltrs and n.exc 500 ltr capacity and removing to store complete all as specified and directed.
Dismantling water tanks exc 500 ltrs and n.exc 1000 ltr capacity and removing to store complete all as specified and directed.
Dismantling water tanks exc 1000 ltrs and n.exc 2000 ltr capacity and removing to store complete all as specified and directed.
S & F rotational moulded polyethelene water storage tanks of capacity 500 ltrs (cylinderical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I complete all as specified and directed.
S & F rotational moulded polyethelene water storage tanks of capacity 1000 ltrs (cylinderical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I complete all as specified and directed.
S & F rotational moulded polyethelene water storage tanks of capacity 2000 ltrs (cylinderical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I complete all as specified and directed.
S & Fixed in repair vitreous china squatting pan 'orrissa pattern' of size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.
S & Fixed in repairs 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S & Fixed in repairs bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15 mm bore dia complete all as specified and directed. Make : Jaquar or equivalent in specified makes as approved.
S & Fixed in repairs bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15 mm bore dia complete all as specified and directed. Make : Jaquar or equivalent in specified makes as approved.
S & Fixed in repairs PVC bib cock 15 mm dia of PTMT white colour screwed down high pressure with crutch or butterfly handle screwed both and iron pipe or for unions and fixed complete all as specified and directed. Make : Prayag or equivalent in specified makes as approved.
S & Fixed in repairs 15 mm dia fancy type pillar taps cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. Make : Jaquar or equivalent in specified makes as approved.
S & Fixed in repairs 15 mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make : Jaquar or equivalent in specified makes as approved.
S & Fixed in repairs 15 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (15 mm -142 gms) complete all as specified and directed. Make : Prayag or equivalent in specified makes as approved.
S & Fixed in repairs 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (20 mm -210 gms) complete all as specified and directed. Make : Prayag or equivalent in specified makes as approved.
S & Fixed in repairs 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (25 mm -455 gms) complete all as specified and directed. Make : Prayag or equivalent in specified makes as approved.
S & Fixed in repairs shower rose of PTMT 100 mm size any colour for swivel type suitable for 15 mm dia pipe (as per sample approved by Engr-in-Charge. Make : Prayag or equivalent in specified makes as approved.
S & Fixed in repair 125 mm size brass chromium plated shower roses with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.
S & F in repairs harrision rails, stainless steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
S & Fixed in repairs PVC (SWR) pipes 110 mm dia with single socket joints fixed to wall with stack clamp complete all as specified and directed.
S & Fixed in repairs PVC (SWR) bends any radious of 110 mm dia bore complete all as specified and directed.
S & Fixed in repairs PVC (SWR) pipes 75 mm dia with single socket joints fixed to wall with stack clamp complete all as specified and directed.
S & Fixed in repairs PVC (SWR) bends any radious of 75 mm dia bore complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clip and providing and fixing new ones complete all as specified and directed.
S & F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each panes complete all as specified and directed.
S & F 3.00 mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 sqm in each panes complete all as specified and directed.
S & F powder coated (minimum thickness of powder coating 50 micron)anodised aluminium section in frames/shutters for doors, windows, ventilators with one or more rebates including jointing cleats, glass, glazing clips, hinges, side lock etc, complete all as specified and directed.
S & F powder coated (of approved shade) minimum grill of size 5 mm x 7.5 mm bars of opening 10 cm size mesh RG 103 (as per royal grill) with aluminium channel 'F' angle 20 mm x 15 mm aluminium frame work all as specified and directed.
Removing building materials etc, to a distance upto 5 KM or under out side MD land, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.
M & L preparation of newly prepared wood and wood based material over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.
M & L preparation of newly prepared steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.
Cleaning and removing all scale and dirt etc, from tanks and mouths of circulating pipes of water tanks exceeding 250 ltr and not exceeding 500 ltr capacity complete all as specified and directed. Note : The rate includes for writing of date of cleaning and next date of cleaning.
Cleaning and removing all scale and dirt etc, from tanks and mouths of circulating pipes of water tanks exceeding 500 ltr and not exceeding 1000 ltr capacity complete all as specified and directed. Note : The rate includes for writing of date of cleaning and next date of cleaning.
Cleaning and removing all scale and dirt etc, from tanks and mouths of circulating pipes of water tanks exceeding 1000 ltr and not exceeding 2000 ltr capacity complete all as specified and directed. Note : The rate includes for writing of date of cleaning and next date of cleaning.
M & L for special treatment of sunken portion of WCs and bath room as per following stages :- Stage 1 : Demolition of WC including lime concrete and cement concrete coba etc and preparing the surface of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil, grease etc complete all as specified and directed. Stage 2 : Providing 10 mm thick plaster in CM 1:4 with chemical DR fixit pedicrete URP/SIKA/ plaster seal of STP Ltd or equivalent complete all as specified and directed. Stage 3 : Applying DR Fixit prime seal primer or STP Ltd and allow to dry for 08 hours under touch dry condition complete all as specified and directed. Stage 4 : Applying two coats of water proofing of DR Fixit pedicrete for the sunken portion of toilet/bathroom (The surface after painting on each coat shall be allowed to dry of 06 hours to next coat) all as per manufacturers instruction complete all as specified and directed. Stage 5 : Again rendering 10 mm thick in CM 1:4 mixed with DR Fixit pedicrete URP of plaster seal of STP Ltd complete all as specified and directed. Stage 6 : All CI joints shall be filled with mixture of cement, fine sand and plaster seal of STP Ltd or DR Fixit pedicrete URP complete all as specified and directed. Stage 7 : Making hole in wall and fixing 600 mm long 25 mm dia GI spout for draining the surplus water if any complete all as specified and directed.
Repairs to RCC chajjas, balconies using cement concrete 1:11/2:3 (using 20 mm graded stone aggregate) including grouting, reinforcement, plastering and formwork etc and make good to surface. Note : (i) Reinforcement details shall be obtained from AGE B/R, R&D, Arangaon office and as per standard structural notes. (ii) The rate inclusive of (a) Reinforcement (b) Formwork (c) Concreting (d) Re-barring of TMT bars with approved chemical. (e) Necessary scaffolding for work in upper floors. (f) WPC if used shall be measured and paid seperately complete all as specified and directed.
S & F steel windows and ventilators, fixed type with glazing bars complete all as specified and directed.
Cleaning the RCC slab by removing dust, dirt etc., drilling holes at construction joints and identify damaged/honey combed concrete surface and fixing PVC nozzles at 2-3 feet c/c and sealing the same with polymer modified mortor. Injection grouting shall be done in the fixed nozzles with non shrink cementitius grout by mixing - 1 pouch (250 gms each) of 'MASTERGROUT CPG-1' of M/s CHOKSEY CHEMICAL PVT LTD, and 50 kgs of cement and sufficient water for flowability, then total area to be filled with water minimum 6 inch deep for minimum 3 days, after 3 days of ponding slab shall be checked for leakage/seepage even dampness and such area shall be marked and pressure grouting/crack filling shall be done. Identifying the cracks, construction joints & filling the same with Polymer Modified Mortor using MASTERCRETE 81. After grouting is completed, cut the nozzle and seal it with Polymer Modified Mortor complete all as specified and directed.
Rectifying the defects in plumbing and sanitary fittings such as water taps, stop valves, pillar taps, waste coupling/pipes, float valves, flush tank, WC seat cover, showers, PVC connections etc by removing loose fittings and fixtures and rectifying defects and refixing the same complete all as specified and directed. (a) The unit rate quoted shall be deemed to be included the elements of labour only for rectifying and making the fittings and fixtures functional. If replacement of part/items is required to make the fittings functional, the cost for labour and material for the same will be measured and paid for as S & F in repairs under relevent items of this schedule hereinafter and in such cases, this items will not be measured and paid for. (b) The contractor will deploy minimum one plumber and one helper from 0900 hrs to 1700 hrs on all working days. (c) Plumber and helper shall be employed on all working days including sundays and holidays & they will have to report to JE (Civil) concern at 0900 hrs at AGE B/R Office. (d) The net rate quoted by the contractor shall be inclusive of working & attending the complaints as directed by the Engr-in-Charge. (e) The plumber who is on duty must be provided with common mobile cell to facilitate and render good services to the users. (f) Complaints slips to be collected daily from complaint cell/AGE B/R, Arangaon complete all as directed. (g) Contractor shall provided all tools/ladder/uniform etc required for attending complaints with proper tool bag all as directed. (h) If individual remains absent on site, contractor shall make an alternative arrangements. If contractor fails to make such arrangement, recovery shall be made at Rs.1000/- for plumber and for Rs. 750/- for helper per day. (j) Attending 05 complaints shall be measured as 01 Job
Taking down door/window/ventilator/shutter/cupboard and easing and refixing the same in same opening, refixing of hardware items such as aldrop bolt, tower bolt, handles, hasp & staple, butt hinges, spring fingers, hydraulic door closer, piano hinges etc by removing broken screws, nails etc and providing new screws/nails. Repair to kitchen shelves, partition, curtain rods, pelmet boxes, steel windows, handle/stay by screwing/nailing etc, tighting of love members of aluminium door, windows, ventilators including tighting, rubber beading etc. Tightening of ceiling member & sheets loosing/tighting sheets, windows/ventilators etc complete all as specified and directed. (a) The unit rate quoted shall be deemed to be included the elements of labour only for rectifying and making the fittings and fixtures functional. If replacement of part/items is required to make the fittings functional, the cost for labour and material for the same will be measured and paid for as S & F in repairs under relevent items of this schedule hereinafter and in such cases, this items will not be measured and paid for. (b) The contractor will deploy minimum one carpenter and one helper from 0900 hrs to 1700 hrs (c) Carpenter and helper shall be employed on all working days including sundays and holidays & they will report to JE (Civil) concern at 0900 hrs at AGE B/R Office all as directed. (d) The net rate quoted by the contractor shall be inclusive of working & attending the complaints as directed by the Engr-in-Charge. (e) The carpenter who is on duty must be provided with common mobile cell to facilitate and render good services to the users and the same shall be deemed to be included in the unit rate quoted. (f) Complaints slips to be collected daily from complaint cell/AGE B/R, Arangaon as directed. (g) Contractor shall provided all tools/ladder/uniform etc required for attending complaints with proper tool bag complete all as directed. (h) If individual remains absent on site, contractor shall make an alternative arrangements. If the contractor fails to make such arrangement, recovery shall be made at Rs.1000/- for carpenter and for Rs. 750/- for helper per day. (j) Attending 05 complaints shall be measured as 01 Job.
Providing misc B/R petty repair services such as repairs to PCC, RCC, flooring , brick work, plastering to damaged surfaces, repairs to tiled surface and other petty masonary work of bldgs all as directed by EIC.. (i) The contractor will deploy minimum one mason and one helper from 0900 hrs to 1700 hrs (ii) Meson and helper shall be employed on all working days including sundays and holidays & they will report to JE (Civil) concern at 0900 hrs at AGE B/R Office. (iii)The Mason who is on duty must be provided with common mobile cell to facilitate and render good services to the users and the same shall be deemed to be included in the unit rate. (iii) In case of extra manpower is required to achievce the required efficiancy, the same will be provided by the contractor without any extra cost to the Govt. (iv)The net rate quoted by the contractor shall be inclusive of working & attending the complaints as directed by the Engr-in-Charge. (v) Contractor shall provide all tools/ladder/uniform etc required for attending the complaints as directed by Engr-in-Charge. (vi) If individual remains absent on site. Contractor shall make alternetive arrangments. if the contractor fails to make such arrangment , recovery shall be made at Rs 1000/- for mason and for Rs 750/- for helper per day. (vii) Attending 05 complaints shall be measured as 01 Job. (viii) Necessary Misc Material like cement, Sand, coarse aggregate, tiles of required size etc shall be provided by contractor at location and included in unit rate quoted.
M&L for cleaning of roof at any position and removing of collected garbage, dry leafs, debris if any, thrown out side MD land including necessary T&P, scaffolding and cleaning of strom water pipes and also including derooting of trees grown on roof top all as specified and directed.
M&L for derooting of trees,plants, shrubes etc of any dia and any shape grown on walls at any position, including removing the trees,plants shrubs out side MD land and including repareing the damage portion by ready mix mortor exc 05 sqm but n.exc 1.00 sqm including finishing two coats of cement base paint over primer to match the existing shade of wall all as direted by EIC. Note: (i) The quoted rate shall deemed to be inclusive of cost element towards necessary T&P , scaffolding etc & removing trees,plants,shrubs etc outside MD land. . (ii) Ready mix mortar shall be any one of Fosroc or Dr Fixit as approved by GE/AGE.
Siddhant Hukumchand kumath
ASHUTOSH BUILDERS
Smruti Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .