SPL REPAIR TO MEDICAL STORE ROOM DENTAL SURGERY AND TOILET P-42 AT MILY DENTAL CENTRE PROVN OF SOLAR GEYSERS AT SINGLE LIVING ACCN AT MNS MESS PERS LINE AND SINGLE OFFRS QTRS AND CERTAIN OTHER SANCTIONED WORKS AT BASE HOSPITAL UNDER GE E/M BHDC

Amount

Taking down wooden roof trusses, coupled rafter or trussed beam up to 4.0 Metre span complete all as specified and directed.

Dismantling timber scantling in fillet, rail, post, rafter, purline etc under 40 Sqcm in section, fixed in any position unframed work complete all as specified and directed.

Dismantling post & struts (wood, steel, RCC) any section including taking out embedded portion and making good disturbed ground post embedded in concrete complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layer not exc 25cm in soft/ loose soil complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

S&F Steel work in tubular trusses/Posts/Rafters/Purlins, angle cleats etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS- 1161-1998 gde St-240 complete all as specified and directed.

Dismantling AC corrugated/semi-corrugated sheets in roof coverings incl ridges complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified & directed.

M&L for plates (plain or chequered) channels, (Fe-410 W (Gde-E-250) square cut or notched (ordinary and counter sunk) forming holes, without any attachment including necessary welding complete all as specified & directed.

M&L two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or girth exc 10cm including preparation of surfaces complete all as specified and directed.

Dismantling wall/ceiling boards (Fibre pulp, Insulation, AC boards, wooden boards etc) or insulation boards/slabs/composite panel, etc any thickness complete all as specified & directed.

S&F GRG (Glass fibre reinforced Gypsum) semi perforated 12 mm thick tiles of size 595 x 595 MM of approved texture, design (Tegular) and patterns having moisture content white colour less than 2% humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 Sub Head : 26.0 New Technologies and materials reflectance of 85%(Min) to be laid in true horizontal level suspended on interlocking metal T grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120grams per Sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross Tof size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items(galvanised @ 80 grams per Sqm ) i e 50mm long, 8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod up to 1000mm length and L shape level adjuster of size 85 x 25 x2 mm. Galvanised iron perimeter wall angle of size 24 x 24 x0.40mm thick of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws complete all as specified and as directed.

Demolition of brick work built in cement mortar of any description including disposal of all debris outside MOD land complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Dismantling brick tiles or terracing tiles, single layer on roof laid over mud pushaka and pointing with cement mortar complete all as specified & directed.

Demolition of Mud in roofs, any thickness, including PCC/Plastering and leeping complete and disposal of all debris outside MOD land complete all as specified & directed.

M&L plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in roof padding, Gola, etc including cleaning the surface by wire brushing complete all as specified and directed.

M&L for 20 mm thick rendering on concrete surface of roof with cement mortar 1:4 finished even and fair including mixing of water proofing compound as per manufacturers instruction complete all as specified and directed. (Note : Water proofing compound shall be measured and paid separately).

Supply only water proofing compound (powder) complete all as specified & directed.

M&L for roof treatment with polymeric membrane (APP based) with non woven polyester mat as reinforcement with following:- (a) M&L for cleaning the new plastered surface and providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.40 Litre/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 4 mm thickness of weight of 4.0 Kg/Sqm with non woven polyester fibre as reinforcement on primed surface by torch application with 15 cm end over laps & 10 cm side over laps etc as per manufacturers instruction. (c) M&L for finishing of top surface by a coat of aluminium paint complete all as specified and directed.

Demolition of reinforcement cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level including disposal of all debris outside MOD land complete all as specified and directed.

M&L for Reinforced cement concrete nominal mix 1:1.5:3, Type A1, using 20mm graded stone aggregate as in slabs etc complete all as specified and as directed. Note : Reinforcement and form work shall be measured and paid separately.

M&L Mild steel TMT bars of Grade Fe-500, 8mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Form work to soffits of suspended slab such as roof slabs floor slab landing and similar work not exceeding 200mm thick complete all as specified and directed.

Demolition of stone slabs laid bedded and pointed in any mortar and cladding tiles of any description or thickness in floors, aprons, walls, etc and removing the debris outside MOD land complete all as specified and directed.

M&L for 20 to 22mm thick Granite stone slab (Superior Quality) of approved shade, (table rubbed and polished) as in floors, jambs, steps, cooking platform etc and the like, over & including 15 mm thick screed in cement mortar 1:4 including pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including two strip of line make of (tread of stair case) granite complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and including disposal of all debris outside MOD land complete all as specified and directed.

M&L 10mm thick Vitrified ceramic tiles (1st quality), double charged (Square/ rectangular), polished, area of each tiles not exc 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

M&L 7mm to 8mm thick, coloured, non skid ceramic tiles, 1st quality, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in flooring, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of tiles, laid over and including 15mm thick screed in cement mortar (1:4) complete all as specified and directed.

M&L 7mm thick, digital coloured, glazed ceramic tiles of size 300mm x 450mm or 300mm x 600mm, in vertical surfaces such as skirting and dados, including designed borders as approved by Engineer-in-Charge/GE, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of tiles, over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed. Note:- (Cost of Designer border in vertical surface shall deemed to be included in quoted rates)

Taking down cement plaster of any description, on brick or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. including disposal of all debris outside MOD land complete all as specified and directed.

M&L 10mm thick cement plastering in cement mortar 1:3, on ceiling surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surface, external surfaces of walls finished the surface fair and even without using extra cement complete all as specified & directed.

M&L preparation of new ceiling surface and applying two coat of oil bound distemper over and including one coat of alkali resistant priming paint, over and including 3mm thick cement based wall care putty complete all as specified and directed.

M&L preparation of new wall surface and applying two coats of 1st quality plastic emulsion interior grade paint of approved tint with roller, over and including one coat of alkali resistant priming paint, over and including 3mm thick cement based wall care putty complete all as specified and directed. (Make of Plastic Emulsion Paint: Asian Paints, Royal Luxury Emulsion or equivalent of Make mentioned in PS)

M & L preparation of old wall surface by washing down, rubbing and removing all loose layers of old treatment, efflorescence, soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one coat of 1st quality plastic emulsion interior grade paint of approved tint with roller complete all as specified and directed. (Make of Plastic Emulsion Paint: Asian Paints, Royal Luxury Emulsion or equivalent of Make mentioned in PS.)

Taking down chowkhat or frames (without taking off shutter from the frame) area not exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhat or frames (without taking off shutter from the frame) area exc 1.50 Sqm but not exc 4.00 Sqm complete all as specified and directed.

S&F aluminium powder coated door frame with partially glazed shutters, single/ double leaf divided into two glazed panels including aluminium anodised snap beading and rubber gasket/lining for fixing of glass as directed. The frame shall be fixed with aluminium anodised bolt by drilling in the existing wall and with thrust bolt of suitable size all as directed. The frame and shutter shall be made out of the following section and fitting complete all as specified and directed : - (a) Aluminium anodised door frame 101.60 mm x 44.75 mmx2mm fixed with aluminium thrust bolt in walls by drilling as directed. (b) Aluminium anodised sides rail of shutter section 83.5mmx 44.5mm x 2mm (c) Aluminium anodised bottom rail of shutter section 150mm x 44.5 mm x2mm. (d) Aluminium anodised top and middle rail of shutter section 100mm x 44.5 mm x 2mm. (e) Aluminium anodised tower bolt 200 mm long - 02 Nos in each leaf as approved. (f) Aluminium anodised handle 250 mm long -02. Nos in each leaf. (g) Glass Pane 5.5 mm thick tinted glass. (h) 12mm thick prelaminated particle board laminated both side exterior grade (j) 100 mm, 4 lever, brass mortice lock

S&F solid PVC moulded door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed.

S&F Factory made solid panel PVC moulded door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing including 3 Nos 100mm PTMT Hinge, 2 Nos 150 mm PTMT Tower bolt and 2 Nos 150 mm PTMT handle per door complete all as specified and directed.

Supply, fabricating and fixing Aluminium windows, made out of powder coated aluminium section two track with two sliding shutters with following sections, including all fittings complete all as specified and as directed: - (a) Frame section shall be 63.50 mmx38.10 mm x 2 mm thick. (b) Two track bottom rail for sliding of shutters 61.85mm x 31.75mmx2mm thick. (c) Two track top section shall be 61.85mmx31.75mmx2mm thick (d) For sliding shutter handle & 'H' bottom section shall be 40mmx (18mm+9) mmx1.45mm thick (e) Sliding shutter shall be provided with 5.5mm thick sheet glass and solar film (Tinted, plain or frosted, as directed). (f) stainless steel wire clothes 0.36mm nominal dia of wire and average width of aperature 1.40mm.

S&F powder coated Aluminium grill, 8 to 10mm thick fixed with separate channel to window/ventilator complete all as specified and directed. Make - DECO grill Cat No. DG-104 or equivalent of Make mentioned in PS.

M&L for powder coated aluminium ventilator frame & shutters, sliding type, with or without sash bars, aluminium sections weighing not less than 0.55 Kg/RM including necessary joining cleats, glazing clips, 4 mm thick glass panes, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays/lock, Rollers, 100mm long hinges type B-21, (2 Nos per shutter), suitable handle (1 No per shutter) complete all as specified and directed.

S&F 18/19mm thick PVC moulded solid board, one side prelaminated for cabinet boxes etc with self and shutter, full size fitted under/ above the kitchen cooking platform and other platform including provision of fixing arrangement /fixing & fixtures (magnetic catches, piano hinges and knob etc) complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal from site complete all as specified and directed.

S&F 15mm bore CPVC SDR -13.5 including all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal from site complete all as specified and directed.

S&F 20 mm bore CPVC SDR -13.5 including all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Dismantling water tanks of capacity exceeding 500 litres not exceeding 1000 litres capacity and removing from site complete all as specified and directed.

Supply, fixing and connecting 1000 Litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top), hoisted and fixed in position including all fittings like GI Tank connection nipples with washers etc all as specified in SSR Part-I complete all as specified and directed.

Supply, fixing and connecting 500ltr capacity Rotational moulded polyethylene water storage tanks, triple layered (cylindrical, vertical with closed top), hoisted and fixed in position including all fittings like GI Tank connection nipples with washers for inlet, outlet, washout and overflow etc and including 20 mm size PTMT Ball valve, high pressure, with epoxy coated Aluminium rod & high density plastic ball, screwed for iron pipe etc all as specified in SSR Part-I complete all as specified and as directed.

S&F Mirror cabinet 350 x 450 mm compete all as specified and directed. (Make : Prayag, Cat No.551 or Equivalent model of Make mentioned in Appendix 'B' to PS.

S & F ball brass valves, high pressure, with polyethene float and fly nut, screwed for 20 mm bore iron pipe compete all as specified and directed.

Taking down/Dismantling eaves gutter, rain water pipes and CI soil, PVC (any type) including all fittings heads, shoes, bends, swan necks etc including cleaning for refixing or removal from site compete all as specified and directed.

S&F 160 mm bore PVC (SWR) pipe, single socketed, in any length, including jointing with solvent cement, fixed to walls complete all as specified and directed.

S&F 160mm bore PVC (SWR) bends with RH or LH access door any radius, including jointing with solvent cement, fixed to walls complete all as specified and directed.

S&F 160mm bore PVC (SWR) junction single, (Single 'T') equal with access door, including jointing with solvent cement, fixed to walls complete all as specified and directed.

S&F 160 mm bore PVC (SWR) vent cowl including jointing with solvent cement, fixed to walls complete all as specified and directed.

S&F 90 mm bore PVC (SWR) pipes single socketed, in any length, including jointing with solvent cement, fixed to walls complete all as specified and directed.

S&F 90 mm bore PVC (SWR) bends with RH or LH access door any radius, including jointing with solvent cement, fixed to walls complete all as specified and directed.

S&F 90 mm bore PVC (SWR) junction single, (Single 'T') equal with access door, including jointing with solvent cement, fixed to walls complete all as specified and directed.

S&F 110 mm PVC (SWR) square multi floor trap including grating with anti mosquitoes filter complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) & trap including connection to drain (or out going pipe and to flushing pipe, anti syphonic pipe) etc complete all as specified and directed.

S & F in repairs plastic water closet seat, black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs 10 litres capacity PVC, valveless, syphonic action type, low level flushing cistern, white with inlet ball valve, float, chain, pull and brackets including flush pipe etc complete all as specified and directed.

S & F 10 litres capacity PVC, valveless, syphonic action type, low level flushing cistern, white with inlet ball valve, float, chain, pull and brackets including flush pipe etc complete all as specified and directed.

S&F 15 mm bore Bib taps, fancy type, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or brass ferrule complete all as specified and directed.

All as per item No 73.00 here in before but fixed in repair complete all as specified and directed.

S&F 15 mm bore angle cock with flange, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or brass ferrule complete all as specified and directed.

All as per item No 75.00 here in before but fixed in repair complete all as specified and directed.

S&F 15 mm bore 2-way angle cock with flange, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or brass ferrule complete all as specified and directed.

All as per item No 77.00 here in before but fixed in repair complete all as specified and directed.

S&F 15 mm bore centre hole basin mixer without pop up, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed.

All as per item No 79.00 here in before but fixed in repair complete all as specified and directed.

S&F PVC connections 15 mm bore, length 450 mm, with PTMT nuts complete all as specified and directed.

All as per item No 81.00 here in before but fixed in repair complete all as specified and directed.

S&F in repair oval type, vitreous china, wash hand basin, snow white, size 560mmx470 mm, including vitreous china matching pedestal, including cutting for and pinning in end of brackets, 15mm angular stop cock, 32 mm brass chromium plated waste fittings, PVC connections of required size, 15 mm bore CP fancy type pillar tap with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed.

S&F toilet paper holder compete all as specified and directed. Make : Prayag, Cat No.BA-98 or Equivalent model of Make mentioned in PS

S&F soap dish compete all as specified and directed. Make : Prayag, Cat No.BA-55 or Equivalent model of Make mentioned in PS

S&F health faucet with 1 metre tube and hook compete all as specified and directed. Make : Prayag, Cat No.BEA-41 or Equivalent model of Make mentioned in PS

S&F towel rack compete all as specified and directed. Make : Prayag, Cat No. BA-03 or Equivalent model of Make mentioned in PS

S&F corner glass shelf 300 mm with ABS brackets complete all as specified and directed. Make : Prayag , Cat No. BEA-46 or Equivalent model of Make mentioned in PS

S&F in repair 15 mm bore, surgical elbow action Bib taps, cast copper alloy, fancy type, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

Demolition and breaking up 150 mm internal dia drain pipes (Salt glazed stoneware) set in cement mortar complete all as specified and directed.

S&F 150 mm internal dia Reinforced concrete pipes, class NP2, laid and jointed in complete with collars, laid in trenches complete all as specified and directed.

M&L cement concrete, bed to drain pipes, in PCC 1:3:6, type C-2, using 40 mm graded crushed stone aggregate, including packing under and haunching against the sides of pipes after they are laid and tested, bores of pipe 150 mm dia complete all as specified and directed.

Cutting into existing manholes for connecting new mains pipe making good to pipes rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finish and reforming benching as required, internal dia of pipe 150 mm dia complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundations of walls and not exc 10 Sqm on plan and not exc 1.5m in soft soil complete all as specified and directed.

All as per item No 95.00 here in before but depth exc 1.5m and not exc 3 m complete all as specified and as directed.

Returning and filling in soil including levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated soil including disposal of all debris to a distance exc 1.5 Km but not exc 5 Km, outside MOD land complete all as specified & directed.

S & F powder coated, aluminium anodised, partition wall made out of Aluminium section 63.50 mm x 38.10 mm x 2 mm thick, with maximum 1m x1m panel, including 5mm thick plain/frosted tinted glass on top half portion and 12mm thick Aluminium composite panel fixed in half bottom portion, including Aluminium beading, glazing clip and rubber beading complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded agg) in foundation, filling and mass concrete, sub base complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20mm graded agg) in foundation, filling and mass concrete, sub base for receiving tile complete all as specified and directed.

M&L Mild steel TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in stirrups complete all as specified and directed.

M&L RCC 1:1.5:3, type A1, using 20 mm graded stone aggregate as in precast cover slab fixed in position, set in cement mortar 1:4 including necessary form work complete all as specified and directed.

M&L RCC 1:1.5:3, type A1, using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, floor and roofs not exc 20 cm wide and sides of RCC / PCC bands in walls, horizontal or sloping and similar work exc 10cm and not exc 20 cm complete all as specified and directed.

Flat formwork to sides and soffits of floor or roof beam, lintels, cantilevers, shelves including supports complete all as specified and as directed.

M&L Plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate, as in coping of Manholes, drains, RCC jallies, Sides of paver blocks, sides of chequered tiles, door cill, ventilator cill, window cills, steps, bands, plinth courses, precast lintel up to 1.5 clear span etc complete all as specified and as directed.

M&L for 15mm thick cement plaster in cement mortar 1:4 on external face of brick surface finished even and smooth complete all as specified and directed.

M&L for 10mm thick cement plaster in cement mortar 1:6 on internal face of brick surface finished even and smooth complete all as specified and directed.

M & L preparation of new wall surfaces and applying two coats of cement base paint to obtain uniform surfaces complete all as specified & directed.

M & L preparation of new wall surfaces and applying two coats of OBD over and including one coat of alkali resistance primer to obtain uniform surface complete all as specified & directed.

M&L broken stone or boulders hard core of gauge not exc 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified & directed.

S&F CI Nahani trap with grating suitable for 75 mm dia outlet and jointing to waste pipe in cement concrete 1:2:4, type B1 complete all as specified & directed.

S&F 100 mm CI sand cast, waste and vent pipes, in any length, with or without ears with cement joints laid in trenches or in floors complete all as specified & directed.

S&F 75 mm CI sand cast, waste and vent pipes, in any length, with or without ears with cement joints laid in trenches or in floors complete all as specified & directed.

S&F 75mm CI sand cast pipes waste and vent pipes, in any length with or without ears fixed to wall complete all as specified & directed.

S&F 100mm CI bends/Tee, diminishing pieces or tapers complete all as specified & directed.

S&F 75mm CI bends/Tee, diminishing pieces or tapers complete all as specified & directed.

S&F 75 mm CI cowls complete all as specified & directed.

S&F CI floor trap with grating suitable for 100mm dia outlet and jointing to waste pipe in cement concrete type B1 (1:2:4) complete all as specified & directed.

S&F MS clamp for 100mm bore CI pipes made out of 40x6mm flat iron and 12mm bars including bolts and nuts including securing to wall in PCC 1:2:4 and making good in cement mortar complete all as specified & directed.

S&F 15mm GI pipe medium grade with all fittings and fixed to wall, floor or ceiling, concealed type complete all as specified & directed.

S&F 20mm GI pipe medium grade with all fittings and fixed complete to wall, floor or ceiling, concealed type complete all as specified & directed.

S&F 15 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 20 mm bore Gun metal, Heavy duty, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 15mm CP brass wall mixer with L bend, with overhead shower and 600mm long extension pipe, mixing hot and cold water, screwed down for iron pipe complete all as specified and directed.

S&F PVC waste pipe 32 mm, 800mm long complete all as specified and directed

S&F 15mm dia chromium plated jet spray (Butterfly) for EWC including 1.50 metre flexible tube complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F Vitreous china Urinal, flat back, half stall, 375 mm x 390 mm x590 cm, white (excluding flushing cistern, flush pipe) but including waste pipe complete all as specifies and directed. Make-Hindware Cat part No - 60002 or equivalent model of Make mentioned in PS.

S & F Vitreous China wash down water closet pan (pedestal pattern) white (squatting pan & trap including connection to drain, PVC seat cover (or out going pipe and to flushing pipe anti syphonic pipe etc complete all as specified and directed.

S&F Vitreous china one piece EWC S concealed 71cmx38cmx77cm wash down water closet pan pedestal pattern white colour including fixing bolted but jointing to soft close seat cover and twin flushing fittings including soft white seat cover of required size complete all as specified and as directed Make; Cera/Hindware

S&F white, Vitreous China under counter wash hand basin of size 560mm x 410mm x 180mm, rest on granite stone slab base, including CP waste coupling, PVC waste pipe, PVC connection (2 Nos), including fixing in wall with required SS fixing bolts, angle & GI pipe & finishing with white cement complete all as specified and as directed. Note: Rate of wash Hand basin shall be including cutting of granite according to shape of wash basin and fixing the wash basin in granite stone slab. Make-Prayag Cat part No 4790 or equivalent Model of Make mentioned in PS.

S&F PVC shelf corner boxed type two tier (300x300 mm size) assembly consisted chromium plated bracket guard and railing, fixed with CP screws complete all as specified and as directed.

M&L Cutting 20mm existing steel tubing for alterations or additions (Each cut measured) including necessary fittings etc complete all as specified and as directed.

M&L PCC 1:3:6, type C2, using 40mm graded stone aggregate, as in surface channel and drain complete all as specified and as directed.

S&F Gl frame work grid size 605x605mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including S&F GI Hangers 6mm dia (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed.

M&L 6 mm thick E-board classic of size 595 x 595 mm, fixed to GI snap grid ceiling, flat or slope complete all as specified and directed.

S&F stainless steel wire clothes 0.36mm nominal dia of wire and average width of aperture 1.40mm with flat Aluminium glazing clips of size 38x3mm to aluminium frame complete all as specified and directed.

M&L75 mm thick PCC 1:3:6 type -C2 using 20mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc shall measured separately) and making good disturbed surfaces of wall floor etc complete all as specified and directed.

Taking down old and unserviceable sub main wiring and removing from the site and making good the disturbed surface complete all as specified and directed.

M&L point wiring for modular switches with 1.5 Sqmm, single core, Multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 Volts grade, drawn through and including rigid non metallic, medium grade PVC concealed conduit, Modular cover plate of suitable size, sunk type CI/Steel terminal Boxes concealed in wall, including cadmium plated screws as per IS, including 1.5 Sqmm size PVC insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly for One light point/one Fan point controlled by one switch 5 Amps one way single pole complete all as specified and directed.

All as per item No 145.00 here in before but one three pin 5 Amps socket out let on independent board complete all as specified and directed.

All as per item No 145.00 here in before but one 3 pin socket outlet 5 amps on the same board with independent switch complete all as specified and directed.

All as per item No.145.00 here in before but point wiring for 15 Amps socket outlet on independent board with copper cable multi stranded 2.5 Sqmm size & 2.5 Sqmm earth conductor complete all as specified and directed.

All as per item No.145.00 here in before but point wiring for 15 Amps socket outlet on independent board/AC point with copper cable multi stranded 4.0 Sqmm size & 2.5 Sqmm earth conductor complete all as specified and directed.

S & F Ceiling rose, PVC/ polycarbonate, isolated body type three terminal, 240 volt complete all as specified and directed.

All as per item No 150.00 here in before but fixed in repair complete all as specified and directed.

S & F Modular switch piano, flush button type, single pole, One way 10 Amps complete all as specified and directed.

All as per item No 152.00 but fixed in repair complete all as specified and directed.

S & F in repair Modular switch piano, flush button type, single pole, One way 16/20 Amps complete all as specified and directed.

S&F in repair Modular stepped type electronic fan regulator, 1 module, 230 V, complete all as specified and directed.

S & F modular socket outlet 3 pin and 2 pin, 10 Amps, flush type complete all as specified and as directed.

All as per item No 156.00 here in before but fixed in repair complete all as specified and directed.

All as per Srl item No 157.00 here-in-before but 20 Amps complete all as specified and directed.

S & F energy efficient LED light fitting 18 Watt, 230 Volt of 1200 mm + 50 mm length including LED rod 6000K colour temp, decorative ultra slim linear LED lighting fixture with extruded Al. heat sink, environmental friendly, energy efficient, wall mounted batten integrated electronic driver complete all as specified and directed.

All as per Srl item No 159.00 here-in-before but fixed in repair complete all as specified and directed.

S & F energy efficient LED light fitting 9 Watt, 230 Volt of 600 mm + 60 mm length 6000 K colour temp, decorative ultra slim linear LED lighting fixture with extruded Al. heat sink, environmental friendly, energy efficient, wall mounted batten integrated electronic driver complete all as specified and directed.

S& F in repair energy efficient LED light fitting post top lantern of 40watt complete all as specified and directed.

S&F in repair Energy efficient recessed mounted Ultra modern Slim design 36 Watt 2X2 recess LED Panel, 5700k to 6500k luminaire, Total system Lumen of 34W to 36W LED should be 3600 or above in Cool day Light(5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>100 Lm/w, THD(%) < 10,Electronic driver Powered by independent isolated, SELV output electronic driver, with Average life of 50000 Burning hours. complete all as specified and directed by Engineer-in-Charge. Make - Havells cat part No. - ENDURASLIMPROPLUS2X2PLR28/36WLED857MOD + LEDDRIVER36V36WS, Wipro Cat part No. - CRCO10R038HP57GL1 or Philips Cat Part No. - RC380BLED36S6500G4L60W60PSUODOC or equivalent model of Make specified in PS.

S&F LED building security Light fitting 45 watt, system efficiency not less than 100 lumen / watt, IP65 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting including taking down old light fitting of any description complete. Make :- CG Cat part No LSTP-45 CDL or equivalent model of Make specified in PS.

S& F in repair exhaust fan 300 mm dia sweep, 1380 RPM, 240 Volt heavy duty, metallic, with louver shutter and brackets, connection with flexible PVC copper cable 3 core of size 1.5 Sqmm of length from ceiling rose to exhaust fan including nut bolt and washers of suitable size complete all as specified and directed. Note: Old unserviceable Exhaust fan shall be deposit at MES store.

M & L Sub main wiring in concealed conduit using two single core PVC insulated FRLS cable 4.0 Sqmm copper conductor multi stranded and 4.0 Sqmm copper conductor insulated cable using as earth wire and drawing in and including 25 mm rigid PVC conduit (Medium grade), concealed in wall /ceiling, inclusive of boxes (junction/terminal) all tees, bends, elbows, reducers bell mouth tube ends fixtures/fittings complete all as specified and as directed. Note : Two runs of 4 Sqmm copper FRLS cable & one run of 4.0 Sqmm copper cable in and including 25mm PVC conduit medium grade shall be measured as one unit. (ii) Rate of Cutting chases, if required, shall deemed to be included in quoted rates.

M & L Sub main wiring in concealed conduit using two single core PVC insulated FRLS cable 6.0 Sqmm copper conductor multi stranded and 6.0 Sqmm copper conductor insulated cable using as earth wire and drawing in and including 25 mm rigid PVC conduit (Medium grade), concealed in wall /ceiling, inclusive of boxes (junction/terminal) all tees, bends, elbows, reducers bell mouth tube ends fixtures/fittings complete all as specified and as directed. Note : Two runs of 6.0 Sqmm copper FRLS cable & one run of 6.0 Sqmm copper cable in and including 25mm PVC conduit medium grade shall be measured as one unit. (ii) Rate of Cutting chases, if required, shall deemed to be included in quoted rates.

S&F MCB, SP, 6 to 32 Amps, 10KA, C Curve complete all as specified directed.

S&F MCB, SPN, 32 to 63 Amps, 10KA, C Curve complete all as specified directed.

S&F MCB, SP, 63 Amps, 10KA, C Curve complete all as specified directed.

S & F in repair MCCB 415 V, adjustable type, 160 Amps, 36 KA, 3 Pole complete all as specified and directed.

S & F in repair distribution board (DB), double door (CRCA sheet) dust and vermin proof, SPN, 8 way, with 200 Amps rated copper bus bar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, flush to wall complete all as specified and directed.

S & F in repair load line distribution board (DB), double door type made out of sheet metal enclosure (CRCA sheet) dust and vermin proof MCCB DB, TPN, vertical, 8 way with 250 Amps rated copper bus bar, 415 Volts, earth bar IP 43 protection, flush to wall, suitable for accommodating MCCB 160 Amps, 3 Pole, 16 KA, 01 No. complete all as specified and directed.

S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20/25 Amps, 240 Volts complete all as specified and directed.

S&F in repair wall fan complete with accessories 230 V, 450 mm sweep, BEE 5 star rated complete all as specified and directed. Note: Old unserviceable Wall fan shall be deposit at MES store.

S&F in repair 5 star rated vertical mounted Water heater geyser of capacity 35ltrs, Features: outer body-ABS, Safety feature-Multi function safety valve, thermostat, thermal cut-out, vitreous enamelled glass line tank with CRCA outer body with powder coated with heavy duty anode rod prevent from corrosion & permanent scaling with adjustable knob for temp setting between 30°C to 75°C, high density PUF for thermal insulation with LED power indication. Technical specifications: voltage-230V, Type-storage, Frequency-50Hz, Wattage- 2 Kilo Watts, Pressure-8 Bar, Pressure Class- Class 1, including plumbing works, elect connection, geyser mounting on wall properly complete all as specified & directed. Note: Old unserviceable Geyser will be deposited to MES store yard.

S & F Earthing complete with galvanised GI earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate not less than 1.5mtr below normal GL, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Bldg at another end GI earth wire encased in and including 15mm dia GI light grade pipe through upper end of earth plate up to main DB of bldg with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate MS funnel with wire mesh fixed on water pipe and Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforced with MS bars 8mm dia @ 150C/c with both ways complete with lifting handle all as shown in electrical plate no 3 of SSR of part-I (1991) complete all as specified and directed.

S & F in repair ceiling fan of 1200 mm sweep 230 Volt, BEE 5 star rating including suitable size of down rod and flexible wire 2 core of size 23 x .0076" complete all as specified and directed. Note: Old unserviceable fan will be deposited to MES store yard.

S&F 5 star rated vertical mounted Water heater geyser of capacity 25ltrs, Features: outer body-ABS, Safety feature-Multi function safety valve, thermostat, thermal cut-out, vitreous enamelled glass line tank with CRCA outer body with powder coated with heavy duty anode rod prevent from corrosion & permanent scaling with adjustable knob for temp setting between 30°C to 75°C, high density PUF for thermal insulation with LED power indication. Technical specifications: voltage-230V, Type-storage, Frequency-50Hz, Wattage- 2 Kilo Watts, Pressure-8 Bar, Pressure Class- Class 1, including plumbing works, elect connection, geyser mounting on wall properly complete all as specified & directed.

S & F distribution board (DB), double door (CRCA sheet) dust and vermin proof, SPN, 4 way, with 200 Amps rated copper bus bar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, flush to wall complete all as specified and directed.

All as per item No 180.00 but fixed in repair complete all as specified and directed.

S& F PVC exhaust fan 250 mm dia sweep, 900 RPM, 240 Volt, with louver shutter, connection with flexible PVC copper cable 3 core of size 1.5 Sqmm of length from ceiling rose to exhaust fan including nut bolt and washers of suitable size complete all as specified and directed.

S& F PVC exhaust fan 300 mm dia sweep, 1000 RPM, 240 Volt, with louver shutter, connection with flexible PVC copper cable 3 core of size 1.5 Sqmm of length from ceiling rose to exhaust fan including nut bolt and washers of suitable size complete all as specified and directed.

S& F Metallic exhaust fan 380 mm dia sweep, 900 RPM, 240 Volt, heavy duty, with louver shutter, connection with flexible PVC copper cable 3 core of size 1.5 Sqmm of length from ceiling rose to exhaust fan including nut bolt and washers of suitable size complete all as specified and directed.

Supply, laying, testing and commissioning XLPE insulated, PVC armoured, heavy duty, PVC sheathed, 1100 volts grade cable with aluminium conductor, 4 core, 25 Sqmm size including taking down old existing unserviceable cable from trenches/ducts/road crossing or along poles/walls etc complete all as specified and as directed.

Supply, laying, testing and commissioning XLPE insulated, PVC armoured, heavy duty, PVC sheathed, 1100 volts grade cable with aluminium conductor, 3.5 core, 35 Sqmm size including taking down old existing unserviceable cable from trenches/ducts/road crossing or along poles/walls etc complete all as specified and as directed.

Supply, laying, testing and commissioning XLPE insulated, PVC armoured, heavy duty, PVC sheathed, 1100 volts grade cable with aluminium conductor, 3.5 core, 50 Sqmm size including taking down old existing unserviceable cable from trenches/ducts/road crossing or along poles/walls etc complete all as specified and as directed.

Supply, installation, testing and commissioning Outdoor type Feeder Pillar floor mounted CPRI approved suitable for 415 volt, 3 phase, 4 wire, 50 Hz, AC supply system having bus bar chamber with duly insulated Aluminium Bus bars of rating 200 Amps mounted on epoxy/SMC type insulator. The panel shall be dust and vermin proof IP 54 class protection and made out of 14 SWG CRCA sheet and 50 mm x 50 mm x 6mm thick angle iron frame work, Powder coated finish outside and inside, both side (front and rear) openable type for cable entry with double door shutter and locking arrangement, internal wiring with PVC insulated flexible copper conductor FRLS cable IS 694 marked of adequate size but not less than 1.5 Sqmm complete including LED phase indicators, digital Voltmeter and Ammeter, including necessary earth work and PCC foundation, plastering etc, height of panel 90 Cm and grouted 45 Cm in PCC, with the following incoming and outgoing feeders complete all as specified and as directed: - (a) Incoming :- (i) MCCB TP + NL , LT 415 Volts, 50 Hz, AC grade, 250 Amps rating and 25 KA-01 No. (b) Outgoing :- (i) MCCB TP + NL , LT 415 Volts, 50 Hz, AC grade, 100 Amps rating and 16 KA - 02 Nos (ii) MCCB TP + NL , LT 415 Volts, 50 Hz, AC grade,63 Amps rating and 16 KA - 02 Nos

M&L Earthing complete with galvanised Iron earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate not less than 1.5 metre below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 32X6 mm GI earth strip electrode welded and revetted to earth plate up to a distance of 7.5 metre long, GI earth strip encased in and including 40mm bore GI light grade pipe, with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, MS funnel with wire mesh fixed on water pipe including excavation earth work, Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed.

Supply, installation, testing and commissioning solar water heating system, 200 LPD Capacity, Zing non pressurized solar water heating system, with ISI Copper-copper Collectors-01 No, Stainless Steel grade - 304 Tank, Corrosion proof against salty climate, mild steel stand structure duly epoxy painted with plack accessories etc with 2KW electric backup along with heater rod complete all as specified and as directed. Make: Intersolar, SSSPL, Tata BP Solar, Racold

Supply, installation, testing and commissioning solar water heating system 100 LPD Capacity, Zing non pressurized solar water heating system, with ISI Copper-copper Collectors -01 No, Stainless Steel grade -304 Tank, Corrosion proof against salty climate, mild steel stand structure duly epoxy painted with plack accessories etc with 2KW electric backup along with heater rod complete all as specified and as directed. Make: Intersolar, SSSPL, Tata BP Solar, Racold Note For item Nos 190.00 & 191.00: - Installation, testing and commissioning of Solar water heating system shall be carried out under the supervision of the Manufacturer's Rep only. The contractor shall submit requisite documents to Engineer in Charge before execution of work. The records of installation, testing and commissioning duly signed by the contractor, Rep of Manufacturer and Engineer-in-Charge shall be submitted to GE for record purpose.

S&F 20 mm bore 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc all as specified and as directed.

M&L cross arms, bracing supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot , drilling holes for bolts in any shape or size as indicated and inclusive of one coat of zinc chromate prime, one under coat & one finishing coat & good quality of aluminium paint complete all as specified and as directed.

S&F galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc complete and connecting to water supply pipe line, laid in trench of following size complete all as specified and as directed: -

(a) 50 mm bore

(b) 40 mm bore

(c) 25mm bore

S&F galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc complete and connecting to water supply pipe line, fixed to walls, ceilings or in floors etc of following size complete all as specified and as directed: -

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

S&F MS plate 3.15 mm thick including cutting welding etc complete all as specified and as directed.

Supply, installation, testing and commissioning Monoblock pump set suitable for 230 V, Single phase, capacity 3800 LPH at 30 Metre head, with connected accessories complete all as specified and as directed.

S&F 20mm bore, PPR Gate Valves (Brass Insert), with end connection and connected accessories including cutting and jointing of pipe line complete all as specified and as directed.

S&F 25 mm bore Gun metal, Heavy duty, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 40 mm bore Gun metal, Heavy duty, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 50 mm bore Gun metal, Heavy duty, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed.

Supply, installation, testing and commissioning outdoor type, feeder pillar Box, 415 Volt, 3 Phase, 50 HZ supply, factory made out of 3.15 mm thick CRCA sheet & MS angle section 40 x40x 5mm frame, with front and back openable, double door, with provision of locking arrangement, dust & vermin proof, gasket, Aluminium 600 Amp TP bus bar & 400 Amp bus bar for Neutral duly insulated with colour coated heat shrinkable sleeves, mounted on proper insulator, gland, welding hinges of dust proof, duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete all as specified and directed & Consisting of the following accessories complete all as specified and as directed: - (i) MCCB, 4 Pole, 35 KA, 400 Amp - 01 No ( Incoming) (ii) MCCB, 4 Pole, 16 KA, 200 Amps - 02 Nos (iii) MCCB, 4 Pole, 16 KA, 100 Amps - 02 Nos (iv) MCCB, 4 Pole, 16 KA, 63 Amps - 02 Nos (v) Single Multifunction meter (RE485 Port -6436) - 01 No (vi) Indication Lamp 22.5 mm dia LED type 240Volts AC to show three phase availability - 01 Set (vii) Solid aluminium bus bar 600 Amp for 3 phase, 400 Amp for neutral (viii) PCC, Masonry work and plastering for grouting of panel complete all as specified and as directed.

Supply, installation, testing and commissioning outdoor type, feeder pillar Box, 415 Volt, 3 Phase, 50 HZ supply, factory made out of 3.15 mm thick CRCA sheet & MS angle section 40 x40x 5mm frame, with front and back openable, double door, with provision of locking arrangement, dust & vermin proof, gasket, Aluminium 600 Amp TP bus bar & 400 Amp Neutral Bus Bar duly insulated with colour coated heat shrinkable sleeves and mounted on proper insulator, gland, welding hinges of dust proof, duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete all as specified and as directed, Consisting of the following accessories :- (i) MCCB , 4 Pole, 35 KA , 320Amp - 01 No ( Incoming) (ii) MCCB, 4 pole, 16 KA, 200 Amps - 03 Nos (iii) MCCB, 4 Pole, 16 KA, 100 Amps - 01 No (iv) Single Multifunction Meter (RE485 Port -6436) - 01 No (v) Indication Lamp 22.5 mm dia LED type 240Volts AC to show three phase availability - 01 Set (vi) Solid aluminium bus bar 600 Amp for 3 phase, 400 Amp for neutral (vii) PCC, Masonry work and plastering for grouting of panel complete all as specified and as directed.

Supply, installation, testing and commissioning outdoor type, feeder pillar Box, 415 Volt, 3 Phase, 50 HZ supply, factory made out of 3.15 mm thick CRCA sheet & MS angle section 40 x40x 5mm frame, with front and back openable, double door, with provision of locking arrangement, dust & vermin proof, gasket, Aluminium 600 Amp TP bus bar & 400 Amp Neutral Bus Bar duly insulated with colour coated heat shrinkable sleeves and mounted on proper insulator, gland, welding hinges of dust proof, duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete all as specified and as directed, Consisting of the following accessories :- (i) MCCB , 4 Pole, 35 KA , 320Amp - 01 No ( Incoming) (ii) MCCB, 4 pole, 16 KA, 160 Amps - 03 Nos (iii) MCCB, 4 Pole, 16 KA, 100 Amps - 01 No (iv) Single Multifunction Meter (RE485 Port -6436) - 01 No (v) Indication Lamp 22.5 mm dia LED type 240Volts AC to show three phase availability - 01 Set (vi) Solid aluminium bus bar 600 Amp for 3 phase, 400 Amp for neutral (vii) PCC, Masonry work and plastering for grouting of panel complete all as specified and as directed.

M/s Birja Nand