RENOVATION WORK OF STATE IT CENTRE OF M.P. STATE ELECTRONICS DEVELOPMENT CORPORATION LIMITED JABALPUR, DISTRICT-JABALPUR

Amount

Workstation 1 Seater with keyboard tray, CPU Trolley, 1200x600mm Without chair-Workstation 1 seater with Metal Keyboard tray and CPU Trolley, Overall Size- L-1340mm, W-685mm, Height-1215mm, Working Height-750mm, Worktop Size- L-1200mm, W-600mm, Top made of 25mm thick Pre laminated particle board, All edges covered with 2mm thick PVC edge banding. 70mm Thick Tiles Base Partition- Internal Frame are made by 1.6mm thk. cold rolled close annealed powder coated Sections. Tiles are made by 12mm. Thk. Pre laminate particle board. Tiles are also available in Glass, Fabric and Steel option. Frame structure are fabricated by MIG/TIG welding Machine. Tiles are fitted by high strength PVC Dowel in PVC Insert with transition fit. provision of Slot for cabling and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and Pole is 1.6mm Thick Aluminium.

Side Runner-SDU with Drawer- Size: Height: 750mm, Width: 900mm, Depth: 400mm. Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Top made of 18mm thick Pre-laminated Particle Board. Side Edges covered with PVC edge band on edge bending machine. Provision of drawer below table top with telescopic channel. Superior Quality make lock. PVC handles. Doors in cold rolled close annealed M.S. Sheet. Doors are Top hung slide on roller bearing. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.

Yuwa Mesh Midium Back- Specification- Size-H:970-1070mm, Seat ht: 460-560mm, D-680mm, W-600 mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is moulded Bright Bar with stitched Mesh Cloth. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable synchrony tilt mechanism and with Single piece Die castes PP arm rest adjustable with PP pad. Quality tapestry. High density Moulded PU cushion.

18 Seater Conference Table- Size - Length-6600mm, Width-1875 / 600mm, Height-750mm, Top & Legs Made Of 25mm thick Prelaminated Particle Board, Front modesty panel made of 18mm thick Prelaminated Particle Board,All eges covered with 2mm thick PVC eges banding.

Chair Ergo Hi-back- Size: Total Height-1050-1150mm, Depth 600mm, Width-535mm Seat Height:420-520mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism and with Single piece integral skin PU arm rest. Quality tapestry with PVC beading all around. High density Moulded PU cushion. Upholstery 2.0 Mtr.

Chair Ergo Low Back- Size: Total Height: 830-930mm, Depth:600mm, Width: 550mm Seat Height: 450-550mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism and with Single piece integral skin PU arm rest. Quality tapestry with PVC beading all around. High density Moulded PU cushion. Upholstery 1.5 Mtr.

70mm Thick Tiles Base Partition- L-1870mm, Height-1215mm, Internal Frame are made by 1.6mm thk. cold rolled close annealed powder coated Sections. Tiles are made by 12mm. Thk. Pre laminate particle board. Tiles are also available in Glass, Fabric and Steel option. Frame structure are fabricated by MIG/TIG welding Machine. Tiles are fitted by high strength PVC Dowel in PVC Insert with transition fit. provision of Slot for cabling and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and Pole is 1.6mm Thick Aluminium

EXECUTIVE TABLE (D1)-1500- Overall Size:- Length:1500mm, Width: 750mm, Height: 750mm, Top made of 25mm thick Pre-laminated Particle Board. PVC edge beading of 2 mm edges by Through Feed Machine. Provision of Cable manager as per L.H. or R.H. side requirement. Cable duct made of 0.8 mm CRCA Sheet. Leg/Side made of 25 mm thick PLPB fitted with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 44 mm width & 4 mm thk with knock down fitting arrangement. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface.

SLIDING DOOR UNIT -SDU-1200- Size: Height:1200mm,Width:900mm, Depth:450mm Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Top made of 18mm thick Pre-laminated Particle Board. Side Edges covered with PVC edge band on edge bending machine. Door set make lock. PVC handles. Doors in cold rolled close annealed M.S. Sheet. Doors are Top hung slide on roller bearing. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.

VISITORA CHAIR - Ergo Visitor- Size: Total Height-850mm, Depth 570mm, Width-550mm Seat Height:440mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. High density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.5 Mtr.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing paneling on wall, on G.I hat furring channel 22-25 depth with grid size 600mmx 600mm both ways fixed to wall, columns in any profile and covered with 8mm. plywood of approved make and finished with 4mm veneer duly polished as approved on exposed faces with grooves as per design.The rates shall include all hardware, fittings, adhesives, beadings, lippings etc. as directed by the architect.Basic rate of veneer is Rs 1100.00 per sqm.

Wall Panelling in 1mm Laminet Finishied- Providing and fixing paneling on wall, on G.I hat furring channel 22-25 depth with grid size 600mmx 600mm both ways fixed to wall, columns in any profile and covered with 8mm. plywood of approved make and finished with 1 mm Laminate as approved on exposed faces with grooves as per design.The rates shall include all hardware, fittings, adhesives, beadings, lippings etc. as directed by the architect

Wooden Veneer False Ceilling- Providing and fixing at all height false ceiling of 12 mm thick MR garde plyboard including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS: 277 and consisting of angle cleats of size 25 mm wide X 15 mm thick with flanges of 22 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastner 12.5 mm dia X 40 mm long with 6 mm dia. Bolts to the angle hangers of 25 X 25 X 5 mm of required length, and other end of angle hanger being fixed with nuts and bolts to 6.1 channels 45 mm X 15 mm X 0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to 6.1 channel with connecting clips made out of 2.64 mm dia. X 230 mm long 6.1 mm wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive – all screws @ 230 mm interval including joining and fixing to a flush finish. The wooden ceiling will be finished with the approved 4 mm veneer finished with two coats of sealer and two coats of melamine polish as per directions and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed finishing of all joints neatly to proper line & level including providing of additional framework for electricals fixtures.including giving trap doors where ever required. Diffusers,cutouts for fire sprinklers etc. as per the specifications approved by architects Including necessary scaffolding supports, suspenders etc. All complete as per drawing and specification and direction of the architect.

Soft Board Panelling- Providing and fixing soft board panels on walls/ partition / panelling in the area indicated in the drawings. 12mm thk. soft board with backing of 8 thk ply . Soft board panel shall be finished with approved fabric Rs. 200/- R. Mt. . All exposed wooden surfaces shall be finished with Melamine polish Rate shall include fixing the whole panel in the space earmarked for the same as per drawing and as per the direction of architect.

Teak Wood Skirting- Providing and fixing Ist ClassTeak wood/Rubeer wood skirting wherever required as per carved profile of size 75mm widex15mm thick duly melamine polished.Fixing details as per drawing and as directed by architect.

Teak Wood Beading- Providing and fixing Ist ClassTeak wood/Rubber wood beading of size 25mmx15mm(max)or as per profile duly melamine polished complete as per details, drawings and as directed by architect.

Storage with Laminate- Providing supplying and fixing at site Side and Back storage unit 450 deep made out of 18 mm thk ply board and back of the side unit is of 8mm ply, unit is provided with verticle and horizontal divisions as per design with drawers & shutters, lockable, with all hardware like hinges, tower bolt, magnetics catcher, lock of approved quality. The cabinet should be raised 75/100mm above ground. Inside exposed ply surfaces of the runner with putty finish, wood primer coats and finished with 3 coats of flat oil base color paint with specified shade. Exposed outside surface Laminated with standard grade laminate of approved design and make. All exposed edges finished with first quality T.W. beadings to be finished in 2 to 3 coats of melamine polish of approved shade. . Provision for cable boxes etc complete if required.

Wall Paper-Providing and applying vinyl coated wall paer of approved brand and finish as per the architects specification including scaffolding cleaning etc., at all levels and location etc, complete as directed and approved by architect. Basic rate of wall paper 600/- per sqmt.

Roller Blind- Providing and fixing of Roller dust proof blinds black out of approved shade, texure and fabric make complete in all respect and properly finished to the satisfaction of Engineer in charge. Make Vyoma.

Supplying, fixing & testing of 4K Ultra HD 55" Smart TV (3840x2160), 3 HDMI ports to connect set top box, Blu Ray players, etc. ound : 20 Watts Output Memory Storage Capacity 4 GB, Ram Memory Installed Size 1.5 GB. Make: LG/SAMSUNG

Supplying & Laying of 4k HDMI Cable.

Providing & Fixing of 24-Port Data Switch of [Managed Layer-2 with 2-Giga Ports (10/100/1000) ]

Wireless Remote Controller:- Supply, Installation, Testing and commissioning of wireless remote controller including labour for all Indoor units.

Signal Recieving Units:- Supply, Installation, Testing and commissioning of Signal recieving unit for all cassette unit 4/2/1 way flow ceiling suspended/mounted cassette type unit & decorative panels including labor for internal wiring, controls. (NOTE:- The bidder shall quote his own rates for Item No. 1 to 25 of Item rate Part.)

Bidder Name

Amount

BONTON TECHNOMAKE PRIVATE LIMITED(GSTN-23AABCB4237A1ZH)

IMPRESSION FURNITURE INDUSTRIES PRIVATE LIMITED(GSTN-NA)

IMPRESSION FURNITURE INDUSTRIES PRIVATE LIMITED

IMPRESSION FURNITURE INDUSTRIES PRIVATE LIMITED