REPAIRS TO PLUMBING SANITARY FITTINGS TILLING AND OTHER CIVIL REPAIR WORKS INCL INTERNAL WIRING AND FITTING AND FIXTURE AT NAYA RAIPUR MIL STN UNDER AGE (I) NAYA RAIPUR

Amount

S&F in repair viteress china wash down water closet pan (Pedestal PATTERN) ,white(excluding fixing bolts,flushing cistern and flush pipe) including plastic water closet seat black,closed pattern with flat bottom,and cover and mild steel chromium plated or aluminium hinging devicet and flush pipe complete including provision of concrete bedding 1:2:4 type BO complete and all as specified and directed.

S&F PVC (SWR) 'P’ trap complete all as specified and as directed.

S&F in repair Vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets and cutting for and pinning in ends of brackets, complete all as specified & directed.

S&F in repair grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified & directed.

S&F CP 20mm dia tubular towel rail 600mm long complete all as specified and directed.

S&F 40mm dia PVC pipe low density (LDPE) of pressure 6kg/CM2 fixed to wall or laid in floor as waste pipe.

S&F in repairs brass chormium plate shower rose 125 mm size including fixing to steel tube all as specified and directed.

S&F 75 mm out let cast Iron floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete B1 (1:2:4 ) using 20 mm graded stone aggregate all as spcefied and directed

M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified & directed.

M & L for 15mm thick Screed bed or bedding layer of mortar (1:6) for laying floor finishes complete all as specified & directed.

M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exceeding 0.06 sqm but n. exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified & directed.

M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but n. exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified & directed.

M & L for glazed ceramic tiles in vertical surface 300x200x6 to 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the existing surface and shade over 10 mm thick cement mortar of 1:4 complete all as specified & directed.

M & L 25 mm thick cemnt concrete type B-1, 1:2:4 ( 20 mm graded aggregate) as in floor finished rough to receive tiles complete all as specified & directed.

M & L Machine cut Kota stone slab flooring 20 mm thick laid over cement screed of 15 mm thick of cement mortar 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & as directed.

Ditto all as per item no 7 above but on vertical surface over 10 mm thick cement mortar of 1:4 complete all as specified & directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified & directed.

M&L for 15 mm thick cement plaster on external surfaces of wall in CM 1:4 including finished surfaces even and somooth without using extra cement mixed with WPC as per manufacturer instructions .(Note :- WPC shall be measured & paid separately)

Supply only water proofing compound of approved make

M&L for two coat Cement base paint on new plastered surface including prepration of surface all as spcefied and directed

S&F in repair 10 Ltr PVC valveless, syphonic action type flushing cystern low level with inlet, ball valve, float and handle including brackets and PVC out let sutaible for IWC complete all as specified & directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified & directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified & directed.

S&F in repair waste coupling with waste pipe of PTMT(half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms)for WHB complete all as specified and as directed.

S&F in repair waste coupling with waste pipe of PTMT(half or full threaded). (Minimum weight 32mm-45gms suitable for urinals complete all as specified and as directed.

S&F in repair pillar taps, 15mm dia cast copper alloy fancy type , with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair bib taps, 15mm chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Taking down GI tubing 15mm bore of any description including cleaning for refixing or removal to store complete all as specified and directed.

All as per item No. 29.00 here in above but 20mm bore complete all as specified & directed.

M & L for providing tubes 'medium grade' galvanised of bore 15mm dia, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.

All as per item No 31 above but 20mm bore complete all as specified & directed.

Refixing old GI pipe 15 mm bore & connections in new or old position to walls and ceiling or laid in floor all as specified & directed.

Refixing old GI pipe 20 mm bore & connections in new or old position to walls and ceiling or laid in floor all as specified & directed.

S&F in repair ball valve high pressure of PTMT 15 mm dia with epoxy coated aluminium rod and high density plastic ball complete all as specified & directed.

S&F in repair ball valve high pressure of PTMT 20 mm dia with epoxy coated aluminium rod and high density plastic ball complete all as specified & directed.

S&F in repair vitreous China squatting pass, 'orissa' pattern size 580 x 440 mm white with integral foot rest.

Demolition and breaking up or down PVC /AC/CI /Cement rain pipe fixed in any position all as specified and directed

S&F 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified

S&F 75mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified.

S&F PVC (SWR) bends 110 mm dia all as specified and directed

S&F PVC (SWR) bends 75 mm dia all as specified and directed

S&F PVC (SWR) cowl 110 mm dia all as specified and directed

Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc complete all as specified & directed.

Dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres etc complete all as specified & directed.

S & F Rotational moulded polyethylene water storage tanks of capacity 1000 liters (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

S & F Rotational moulded polyethylene water storage tanks of capacity 500 liters (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe all as specified & directed.

S&F 25 mm nipple suitable for HDPE water tanks including necessary driling holes etc fixed complete.

S&F in repair 15mm bore angle valve /stop valve chromium plated fency type.cast copper alloy screwed down high pressure,crutch or butterfly handle, ,screwed both end for pipe or for unions complete.chromium plated with suitable type as directed.

Taking down carefully copper/Aluminum point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators sockets etc. and making good the disturbed surfaces of walls, floors etc and match with the existing colour of wall complete all as specified and as directed.

Taking down carefully sub main wiring of any Nos of wire & size with earth wire on wooden batten/surface PVC and metallic conduit/casing & capping with accessories complete all as specified and as directed.

M&L Point wiring complete with 1.5 sqmm PVC insulated stranded copper conductor multistand hrfr wire core cable drawn through and including rigid non metalic PVC conduit 20 mm dia ( meadium grade ) , ISI marked with concealed conduit wiring including cutting chases and making good in CM 1:3 & white/colour wash to match existing surface, pressed steel terminal boxes not less than 1.6 mm thick concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer, plastic laminated top sheet cover 2.8 mm thick of required size and colour for housing switches and sockets, 1.5 sqmm PVC insulated (green insulation) copper conductor as earth continuity cable drawn with wiring and connected to common earth dolly all as specified for -

(a) One light/Fan/Bell point controlled by one switch

(b) One light point controlled by two 2 way switch

(c) One socket out let 5 pin 5 Amp on independent board

(d) One socket out let 5 pin 5 Amp on same board

Description all as per item No 04 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated hrfr cable and unsheathed cable for 3/6 pin 5 & 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

Taking down and S&F Switch modular, Single pole, one way, 6 amps, 230 Volts,all specifed and directed

Taking down and S&F Switch modular, Single pole, one way,16 amps, 230 Volts, all as specifed and directed

Taking down and Supply and fixing madular type socket 6/16 amps- 2/3 pin combined module box type (as per site required ).

Taking down and S&F switch modular, Single pole, two way, 6 amps, 230 Volts, all as spcified and directed

Taking down and Bell push /modular, Single pole, one way, 6 amps, 230 Volts, all as specifed and directed

Taking down and S&F socket modular, Single pole, one way, 6 amps, 230 Volts, all as specifed and directed

Taking down and S& F electronic fan regulator 5 step Two module of all as specifed and directed

Taking down and Supply & fixing moadular white cover plate with frame 6 way module type switch (as per site required).

Taking down and Supply & fixing moadular white cover plate with frame 8 way module type switch (as per site required).

Taking down and S & F SP, 6 to 32 Amps, 240 Volts , 10 KA , 'c' curve MCBs complete all as specified and directed :- (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Taking down and S & F SPN, 32 to 63 Amps, 240 Volts , 10 KA , 'c' curve MCBs complete all as specified and directed :- (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating). all as specifed and directed by engr-in-charge

Taking down and S & F TPN32to 63 Amps, 440 Volts , 10 KA , 'c' curve MCBs complete all as specified and directed :- (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating). all as specifed and directed

Taking down and S&F batten/angular lamp holder made up of bakalite complete all as specified and directed

Taking down and S&F ding dong bell 230 volt single phase complete all as specified and directed complete .all as specified and directed

M & L for sub main wiring with PVC insulated sheathed two single core 4 Sqmm hrfr and One No. 2.5 Sqmm single core cable stranded copper conductor 1100 Volt grade hrfr to be use as continuous earth connected to earth drawn into PVC conduit/Casing N capping size not less than 25 mm (medium grade) with all accessories complete all as specified and as directed. Note : Two runs of cable for Sub Main and One run of earth wire shall be measured as One length with PVC conduit / casing-N-caping. all as specifed and directed

M & L for sub main wiring with PVC insulated sheathed two single core 6 Sqmm hr fr and One No.4 Sqmm single core cable stranded copper conductor 1100 Volt grade hrfr to be use as continuous earth connected to earth drawn into PVC conduit/Casing N capping size not less than 25 mm (medium grade) with all accessories complete all as specified and as directed. Note : Two runs of cable for Sub Main and One run of earth wire shall be measured as One length with PVC conduit / casing-N-caping. all as specifed and directed

S & F in repaires of batten for LED tube light fitting with suitable for 1 x 20 watts 230 volts 4 feet long Energy efficiency etc complete set with all accessories internally pre wired and incl connection from ceiling rose to tubelight fitting 3 core flexiable copper cable 0.75 sqmm approx 1.5 mtr long compete and connection. all as specifed and directed by engr-in-charge

Taking down defective fluorescent tube light fittings of any type, 1x36 watt. 1x 20 watt, 4x20 watt, CFL 2 x 36 watt, after disconnecting electrical connection and repairing the same including replacement of defective parts such as chokes, starter, bipin holder, base plate , PVC flexible copper three core wire, 23/0.0076 upto 1.5 meter length , all as required at site complete all as specified and as directed. all as specified and directed

Supply Only ( in repairs) Polycarbonate socket out let 2 in 1 socket 5 pin , (6 Amps ) flush type controlled by one switch, complete all as specified and directed by engr-in-charge

Supply Only ( in repairs) Polycarbonate Switch socket commination out let 2 in 1 socket 5 pin , (16 Amps ) flush type controlled by one switch, complete all as specified and directed by engr-in-charge

Supply Only ( in repairs) polycarbonate Switch piano flush type,SP, 6 Amps, one way ( ISI) marked of Anchor or equivalent of other specified make complete .all as specified and directed by engr-in-charge

Supply and fixing in repair /replacment of sheet metal enclosure DB 240 volt double door 240 volt with 200 amps bus bar 8 way all as specified and directed by engr-in-charge

Supply and fixing in repair /replacment of sheet metal enclosure DB 415 volt double door 240 volt with 200 amps bus bar 4 way all as specified and directed by engr-in-charge

Supply and fixng of single pole and neutral enclosure with a two pin and earth plug and earth socket complete with one single pole MCB 20 amps 240 volt

Earthing with Galvanised Iron Earth Plate Electrode 600X600X6mm size buried directly in Ground vertically at a depth not less than 2.25 METRE below Ground Level with the Top Edge of Earth Plate at a depth not less than 1.50 METRE below Ground Level connected to GI Strip 20X3.0mm as Earth Lead by means of Bolts, Nuts, Check Nuts and Washers of Galvanised Steel, Earth Plate Electrode surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers not exc. 150mm thick, Aluminium Strip protected with and including Galvanised Iron Pipe 40mm Bore (dia) Light Grade, upto 1.0 METRE above the Floor Level of the Building where Main Switch/DB situated including PCC Pit in Cement Concrete 1:3:6 (20mm Graded Stone Agg-regate) and RCC Cover of size 540X540X50mm in RCC 1:2:4 (20mm Graded Stone Aggregate) rein-forced with and including 8.0mm dia TMT Bars @ 100mm centre to centre both ways, Galvanised Iron Wire Mesh, Funnel, Galvanised Iron Watering Pipe 20mm Bore (dia) Medium Grade, necessary Excavation in Soft/ Loose Soil, returning, filling in and removal of surplus Spoil upto a distance of 50.00 METRE and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on completion including Taking down Unserviceable Earthing, complete all as specified and as directed.

Taking down of LED lamp of any type and capacity

Supply anf fixng in repair of LED lamp rotary type/holder type of 9 watt all as specified and directed by engr-in-charge

M&L for Rewinding of ceiling fans including opening of fan, Removing the burnt copper winding of ceiling fan after testing and cutting the rotor coil complete and making clean the rotor & the stator and rewinding with and including super enamelled copper wire of approved quality of existing gauge, over-hauling, lubricating with fresh grease including assembling with replacement of unserviceable parts (to be measured & paid seperately) and testing for satisfatory operation complete for the following .

(a). 1200mm sweep .

(b) 1400mm sweep

M & L for Opening of ceiling fan of any make and any sweep for over-hauling complete including providing fresh clean lubricating Oil/ grease, reassembling for proper functioning , with replacement of unserviceable parts (to be measured & paid seperately) and testing for satisfatory operation complete for the following .

(a). 1200mm sweep .

(b) 1400mm sweep

Supply only in replacement of ball bearing of 6201/120 for ceiling fan/ exhaust fan of any size and make complete. Make : NBC, SKF, TATA

All as per Item above but 6202/115 complete. Make : NBC, SKF, TATA

All as per Item above but 6203/117 complete. Make : NBC, SKF, TATA

All as per Item above but 6204/118 complete. Make : NBC, SKF, TATA

Supply only in replacement of condenser 2.5 MFD of apporved make forceiling fan complete. Make : ED cos, Scimanse, Unic

Supply only in replacement of self lubricating bush of gun metal of same make for ceiling fan/exhaust fan complete.

Supply only in replacement of shaft of approved quality for ceiling fan/Exhaust fan any make and type & size complete.

S&F in replacement of split pin suitable for ceiling fan/ exhaust fan any make and type & size complete.

S&F in replacement of PVC flexible 3 core cable hrfr with copper con-ductor of size 16/0.20 mm from ceiling rose to fan including connection complete.-

S&F in repairs rubber reel suitable for ceiling fan of any make and size.

S&F in repairs GI pipe medium grade with all fitting and fixed complete for ceiling fan as down rod .75 cm long of 15 mm bore.

M&L in replacement for clamps and back plates fabricated from steel section conforming to Gde Fe 410-0 or Fe 310-0 includingnuts, bolts, washers, drilling holes for bolts in any shape or size for fixing ceiling fan complete weighing not more than 2Kg.

M& L for comprehensive maintenance and overhauling of ceiling fans at site of any make and size including following works (a) Checking proper working of ceiling fans. (b) Checking of safety pin/sockets/clamps including replacement of unseviceable part (c) Replacement of unserviceable condenser/bearings. (d) Cleaning of ceilingfan/overhauling with fresh grease. ( e). Note : 1.Contractor has to depute Two electricians daily who will report to JE /Fan incharge. 2 Unserviceable parts to be measured & paid seperately under relevant item of Sch A..3.All T & P and ladder provide to electrician at site by contractor.

Supply and laying of XLPEinsulated armoured heavy duty elctric cable with aluminium conductor 1100 volt grade cross sectional area 16 sqmm 4 core all as specifed and directed by engr-in-charge

Supply and laying of XLPEinsulated armoured heavy duty elctric cable with aluminium conductor 1100 volt grade cross sectional area 25 sqmm 4 core all as specifed and directed by engr-in-charge

Excavation in trenches in any type of soil, n. exc. 1.5m wide and n. exc. 1.5m deep and getting out for laying of cables/pipes etc including forming bottom surfaces to the required level/slope complete, all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick in any type of soil complete, all as specified and directed..

Removal of surplus excavated soil to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete, all as specified and directed..

Supply and spreading clean and dry fine sand free from sharp material (unwashed) laying in trenches around the cable for cushioning complete, all as specified and directed.all as specified and directed by engr-in-charge

M & L brick protection cover over cable of “Sub class 'B' laid dry over cable (length of brick shall be laid across the length of cable) complete, all as specified and directed.all as specified and directed by engr-in-charge

Total contracts sum shall be calculated after deduction of schedule of credit amount of Rs. 18,811.00

FIRST SOLAR

m/s ramanuj singh and sons

ashish shrivastava