Repair and Renovation of Bath Room at SSK Leh.

Amount

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. . 50 mm thick with 20mm nominal size stone aggregate.

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

15mm Cement plaster on the rough side of single or half brick wall of mix 1:4 (1 Cement : 4 Fine sand)

Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and fixing 8mm thick pre-liminated flooring approved brand like action Teas, green ply or equivalent. Complete job

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown

Providing and Fixing white vitreous china pedestal type water closet ( European Type ) with seat and lid, 10 ltr low level white vitreous china flushing cistern and CP flush with fittings, overflow arrangement with spwcials of standard make and mosquito proof coupling of approved municipal design compete including painting of fittings and brackets, cuttings and making good the walls and floors, wherever required: W.C pan with ISI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C.P flush bend.

Providing and Fixing water closet squatting pan (India type W.C pan) with 100mm sand cast Iron P or Strap, 10 ltr low level P.V.C flusjing cistern including flush pipe (of approved make) manually control ( led device 9 jandle lever) confroming to IS: 7231, with all fittings and fixtrures complete, inculding cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C pan of size 580X440 mm with integral type foot rests.

Providing and Fixing G.I inlet connection for flush pipe connecting with W.C pan,

Extra for providing coloured other than black solid PVC plastic seat and cover in European type WC pan instead of white plastic seat and cover.

Providing and fixing jet for westren type water closet.

Providing and fixing wash basin with C,I/M.S brackets, 15mm C.P brass piller taps, 32mm, C.P brass waste of standred pattern, including painting of fitting and brackets, cutting and making good the wall wherever required: white Vitreous China Wash basin size 550X400mm with a pair of 15mm C.P brass piller taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusionwelded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe , 25mm OD

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe , 32mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe , 40mm OD(SDR-7.4)

Providing and fixing PVC soil waste and vent pipe of required dia including bends, Tee door bend, L bend trap jointed with addisive material ISI marked like prince vector or equvilent brand all complete. A) 100mm.

Providing and fixing PVC soil waste and vent pipe of required dia including bends, Tee door bend, L bend trap jointed with addisive material ISI marked like prince ventor or equvilent brand all complete. A) 75mm

Providing and fixing 75mm PVC floor or Nahani trap.

Providing and fixing toilet paper holder C.P brass.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangment of approvrd quality and colour 600mm long towel rail with total length of 645mm, 78mm wide and effective height of 88mm, weighimng not less 190 gms

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimmum distance of 37 mm from wall face with conceraled fitting arrangement of approved quality and colour,weighing not less than 88 gms.

Providing and fixing 600X450mm beveled edge mirror of superior glass ( of approved quality) complete with 6mm thick hard board ground fixed to wooden cleasts with C.P brass screw and washers complete.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. each

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Providing and fixing floor jail.

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 500x700 mm and 45 cm deep for single pipe line with one or two inlets.

Providing and fixing K-flex insulation to PPRs pipes in internal walls.

Providing and fixing of insulation for bath room pipe i.e 1st layer of glass wool binded with wire mesh, K-flex, electrical heat tape and cover with aluminium sheet all complet job.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge. 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Dismantling 15 to 40mm dia G.I pipe including stacking of dismantled pipes 9 within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work-Exposed on wall.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Carriage of material from source to site by M.T including loading , unloadung and stacking complete job a)Cement and Steel an avg lead 02 kms

c)Sand/Stone agg.an avg lead 15 kms

d)Stone agg. an avg lead 15 kms