Execution of Work under Minor civil and Electric Work ( development of Repair of Building) To Construction of Public toilet at ganesh Bagh temple complex Karvi.

Amount

Execution of work

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m-All kind of soil.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil

Providing and laying cement concrete 1:3:6 (1cement : 3 coarse sand : 6 stone aggregate of 20 mm nominal size) in foundation including ramming compacting and curing etc complete.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in all shapes and sizes in : Cement mortar 1:6 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry partition in 1:4 cement mortar with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 etc complete.

Brick on edge flooring in 1:4 cement mortar with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks etc complete.

12mm thick Plaster on internal surface on brick walls in cement sand mortar 1:6(1 cement : 6 coarse sand) including racking of joint, curing etc complete fine finish.

20mm thick Plaster on internal surface septik tank in 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement including racking of joint, curing etc complete fine finish.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead up to 50 m etc complete.

Dry stone pitching / soling 22.5 cm thick including supply of stones and preparing surface etc complete.

Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement up to plinth level etc comlpete.

Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) in beams, suspended floors, roofs chajjas, lintels, bands, plain above plinth level excluding the cost of centering, shuttering, finishing and reinforcement etc comlpete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars

Centering and shuttering with 12 mm thick shuttering plywood confirming to IS 4990:2011 and removal of form at all heights. Plywood will be supported on lock bars. Suspended floors, roofs, landings, balconies and access platform.

Providing and fixing vitrified floor tiles in different size with water absorption less than 0.08% of approved make in all colour and shades, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 C. Sand ) jointing with grey cement slurry @ 3.30kg/sqm including grouting the joints with white cement and matching pigment etc complete.Size of Tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

25mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) etc.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade having VOC (Volatile Organic Compound ) content less than 50grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Providing and fixing MS rectangular hollow pipe 60x40mm railing on the top of toilet roof including cutting and welding etc complete in all respect.

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel works.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufactur.

Providing second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (Drawing of Door, Window & Ventilation enclosed). Door with Ventilator Size 1.20 x 2.55- 3 Nos, Door size- 0.75 x 1.95 – Nos, Window size- 1.20 x 1.50 – 5 Nos, Ventilator –V size- 0.90 x 0.45 – 2 Nos & Ventilator V1 Size – 0.45 x 0.45 – 6 Nos

Providing and fixing Second class teak wood 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately).

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick Granite of any colour and shade

Diluting and injecting chemical emulsion for Post-Constructional anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With chlorpyriphos/lindane E.C. 20% with 1% concentration

Providing and fixing 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone slab for platforms, door gems,vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red-Area of slab over 0.50 sqm

Paintting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) on the wooden chowkhat/door/window complete in all respect.

Polishing on wood work with ready mixed wax polish of approved brand and manufacture on the wooden chowkhat complete in all respect.

Supply and fixing 450x450 mm CI Main hole cover for Septic and soak pit tank.

Supply of following Sanitary, Hard ware and CPVC item.- White vitreous china flat back lipped front urinal basin of size 430 x 260 x350 mm (Parry ware/Hind ware)

White vitreous china European type W.C. sheet. (Parry ware/Hind ware)

White vitreous china Orissa pattern W.C. pan of size 580 x 440 mm. with integral type foot rest. (Parry ware/Hind ware)

10 ltr low level white P.V.C. flushing cistern including flush pipe with manually controlled device (hand lever)

White vitreous china wash basin of size 630 x 450 mm

C.P. brass 15 mm pillar Tap (Parry ware/Hind ware)

C.P. Brass Angle valve for basin, mixture, geyser 15 mm nominal bore.

C.P. Brass Bib cock 15 mm nominal bore.

Liquid soap container 109 mm width, 125mm height and 112 mm distance from wall of standard shape of a approved quality and colour weighing not less than 105 grams.

C.P. Jali for Drain of diameter 10 cm.

C.P. Extension Nipple 15 mm nominal bore.

Sink or Wash basin semi rigid west pipe 32 mm dia.

10 cm dia PVC Pipe approved class

40 mm CPVC Pipe approved class

25 mm CPVC Pipe approved class

20 mm CPVC Pipe approved class

15mm CPVC Pipe approved class

Rectangular shape Mirror of size 300 x 60 cm. with plastic moulded frame of approved class with 10 mm thick hard board backing.

Rectangular shape Mirror of size 90 x 60 cm. with plastic moulded frame of approved class with 6 mm thick hard board backing.

Water tank 500 ltr capacity (Syntex or Polycone 4 layer)

MISCELLANEOUS HARDWARE / CPVC ITEM OF SANITARY IN TOILET BLOCK (Elbow, Tee, Socket, Union, Tank Connecter, clamp, bush etc complete) ISI Marked

Fitting and installation charges of Wash Basin complete accessories

Fitting and installation charges of Urinal, W.C., and Orissa pan

Fitting and installation charges of Hardware and CPVC item.

Supply and fixing of electrical items in Camp office Conduit pipe 25mm dia 10 feet length

Modular holder (havells, Anchor or equilent)

Ceiling rose (havells, Anchor or equilent)

5/6 A modular switch (havells, Anchor or equilent)

3 pin 5/6 A modular socket (havells, Anchor or equilent)

PVC box with modular plate (havells, Anchor or equilent)

Power switch 16A (havells, Anchor or equilent)

Power socket 16A (havells, Anchor or equilent)

MCB - 32A (havells, Anchor or equilent)

MCB box (havells, Anchor or equilent) for 10 no M.C.B. and Main Switch

Copper Wire 1.00 Sqmm (havells, Anchor or equilent)

Copper Wire 1.5 Sqmm (havells, Anchor or equilent)

Copper Wire 2.5 Sqmm (havells, Anchor or equilent)

15 W LED Bulb (havells, Anchor or equilent)

9 W LED Bulb (havells, Anchor or equilent)

Exhust fan (havells, Anchor or equilent) P.V.C. body of size 300 x 300 mm

Ceiling fan (havells, crompton greves or equilent. 3 Blade 1200 mm

Panel LED light 15watt for ceiling (Philiphs/havells, Anchor or equilent)

Fitting and installation charges of above electrical items.

Pradeep Kumar Shukla (BID ID -3338219)

UMA CONSTRUCTION (BID ID -3338530)

M/S VINOD KUMAR (BID ID -3336850)