works for effecting services in various schemes in Rural Edapady sub division

Amount

Work contract schedule

Excavation of pole pit for 27" (8.0 m ) Pole by using JCB or manual

Excavation of pole pit for 30" RCC Pole / (9.0 m ) Pole by using JCB or manual

Excavation of stay pit 4.5' to 5' depth by using JCB or manual

Erection of PSC/RCC Pole upto 8.0m (27") by using crane or manual

Erection of PSC/RCC Pole upto 9.14m (30") by using crane or manual

Erection of Stay set complete

Fixing of HT V cross arms (all typs) / Channel cross arms / guarding Cross arm

Fixing of LT 3Ph cross arm

Fixing of LT 1Ph cross arm

Fixing of HT/LT TI Fittings

Fixing of HT Pin insulators 22KV

Fixing of HT Strain Disc 22KV

Fixing of LT Pin insulators

Fixing of LT Shackle

Fixing of Aluminium Knob

Paving and stringing of 7/3.35 mm ACSR, 7/3.30mm AAAC

Paving and stringing of 7/2.59 mm ACSR, 7/2.59mm ACSR

Flat guarding including fixing of 2 cross arms

Earthing of pole with coil earthing including burying looping and binding.

ERECTION of Double Pole TRANSFORMER STRUCTURE COMPLETE inclusive of following works - Excavation of pole pits sizing 2' X 2' X 6', erection of poles, erection of base plate, erection of structure materials , erection of AB switch and HG Fuse, Structure Earthing complete , Pole concreting (2'x2'6') for both base and sleeve including supply of jelly, sand and cement by the contractor , plinth erection with plastering ratio 1:2 including supply of cement and sand , Fixing of Open Type fuse units, HT/LT LAS fixing and LAS earthing through PVC Pipe 0.5" , Provision of bus-bar arrangement, Erection of Stay Set complete, Jumpering, erection of support angles and insulators if any , Alteration of materials in lathe works if any, provision of danger board, 3 Nos Earth pits including erection of cement collar , painting of metal parts, including loading, unloading, transportation of all required materials from stores to site , Road site to pit spot as per the directions by the TANGEDCO Site Engineer (This includes labour for loading, unloading, transporting and rent for crane lorry, all T&P suchas crowbars, siling, DShackle etc., that must be brought by the contractor)

ERECTION of HVDS TRANSFORMER STRUCTURE COMPLETE inclusive of following works - Excavation of pole pits sizing 2' X 2' X 6', erection of poles, erection of base plate, erection of structure materials , erection of AB switch and HG Fuse, Structure Earthing complete , Pole concreting (2'x2'6') for both base and sleeve including supply of jelly, sand and cement by the contractor , plinth erection with plastering ratio 1:2 including supply of cement and sand , Fixing of Open Type fuse units, HT/LT LAS fixing and LAS earthing through PVC Pipe 0.5" , Provision of bus-bar arrangement, Erection of Stay Set complete, Jumpering, erection of support angles and insulators if any , Alteration of materials in lathe works if any, provision of danger board, 3 Nos Earth pits including erection of cement collar , painting of metal parts, including loading, unloading, transportation of all required materials from stores to site , Road site to pit spot as per the directions by the TANGEDCO Site Engineer (This includes labour for loading, unloading, transporting and rent for crane lorry, all T&P suchas crowbars, siling, DShackle etc., that must be brought by the contractor)

Transport of Materials. Below 8 Kms.

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual up to 100 m

Loading of poles upto 27'-0"

Loading of poles upto 30'

Unloading of poles upto 27'

Unloading of poles upto 30'/RSJ pole

Loading or unloading of line Material

Loading & unloading of Transformer upto 200 KVA for each

Erection of New Transformer upto 200 KVA

Alteration of Back Clamp

Alteration of Stay Clamp

Drilling of hole in channel 3/4 &1" hole

Cutting of Channel

Re sagging of ACSR7/2.59MM,AAAC 7/2.50MM&ACSR7/2.11

Dismandling of RCC pole 9.14mtr /RSJ pole

Dismandling of RCC/PSG pole 8.0mtr/7.5mtr

Dismandling of all types HT CROSS ARM

Dismandling of LT 3 phase X arm

Dismandling of LT single phase X arm

Dismandling of HT/LT TI Fitting

Dismandling of 11KV Strain disc

Dismandling of 22KV pin insulator

Dismandling of Aluminium knob

Dismandling of LT Shackle

Dismandling of LT Pin Insulator

Dismandling of Stayset complete

Dismandling of ACSR 7/3.35mm conductor

Dismandling of ACSR 7/2.59mm/ 7/2.11mm conductor

Releasing of single phase service and re-fixing.

Releasing of 3 phase service and (upto 50 HP) re-fixing.

E.P.F. @13 % should be Entered by the Bidder

E.S.I. @ 3.25 % should be Entered by the Bidder

G.S.T. @18% should be Entered by the Bidder