Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹35.7 L+₹64,670 (1.84%)Rejected-Finance | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹36.1 L+₹1.1 L (3.03%)Rejected-Finance OLD DAILY MARKET DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L3 | Rejected-Finance Quoted amount higher than L1 | |
| 4 | L4₹37.1 L+₹2.0 L (5.80%)Rejected-Finance | L4 | Rejected-Finance Quoted amount higher than L1 |
Tender Value
₹29.3 L
EMD Value
₹58,700
Closing Date
21 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col NK Chaudhary
HQ 137 WKS ENGR PIN 914137 CO 99 APO
SPECIAL REPAIRS TO ROAD AND ROAD SIDE FURNITURE AT RANGAPAHAR MILITARY STATION UNDER GE 868 EWS
2022_MES_510958_4
8668/E8
Open Tender
Civil Works - Roads
Item Rate
120 days
Rangapahar
Please refer tender documents
6 documents required · 6 mandatory
₹500
GE 868 EWS
₹58,700
15 Mar 2023
29 Sept 2022
28 Oct 2022
29 Sept 2022
21 Oct 2022
7 Oct 2022
Amount
Material & labour for repairs to potholes of depth n.exc 30mm and area not exc 1 Sqm each including sweeping free from dust and mud, or water, scouring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat with bitumen grade VG-10 @ 5 Kg per 10Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder @ 9.8 kg per 10 sqm (using paving bitumen, grade VG-30), blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), rolled with power roller 8 to 10tonne and compacted to required camber and gradient and finishes to a uniform and smooth surfaces complete all as specified and directed.
Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer @ 5 Kg per 10Sqm using paving bitumen grade VG-10 complete all as specified and as directed.
Material and labour for bituminous premix semi dense asphaltic dense concrete 40mm (consolidated thickness) with 5.5% binder of paving bitumen VG-30 grade content by weight of total mix, including cement filler on surfaces rolled and compacted with using 8 to 10 tonne power roller to achive the required compactness , camber and gradient. The mix shall be done using hot mix plant as per design mix and shall be laid by mechanical paver complete all as specified and directed. (Note: (i) The actual binder content shall be as per optimum content based on approved job mix formula with minimum content of 5.5% by weight of total mix (ii) Design mix to be approved by the GE.)
Material and labour for applying evenly a priming/tack coat with bituminous primer @ 2.5 Kg per 10Sqm using paving bitumen grade VG-10 over bituminous surfaces complete all as specified and as directed.
Material & labour premix bituminous macadam laid / rolled to required gradient and camber consolidate thickness 50 mm thick (average thickness) with paving bitumen any penetration to on existing surfaces, depression on the existing surfaces and to provide proper camber on road with hot mix bituminous macadam with minimum 4.5% binder content by weight, spreading with mechanical paver and compacting with power driven roller weighing not less than 8 to 10 tones each, and vibratory road roller and super elevation uniform and smooth surface complete all as specified and directed.
Material and labour for painting lines, dashes, arrows, letters etc on roads, pavements and the like exc. 10 cm wide by applying 2.5 mm thick thermoplastic road marking paint of specified shade / colour either continious or broken lines to the required width and length over the existing painted surface / new bituminous surface with solvent based thermoplastic road marking paint using semi automatic thermoplastic paint applicator machine driven by experienced operator on road including all materials, labour, T&P and cleaning dirt, seals, oil, greases and foreign materials etc of road surface complete all as specified and directed. ( Note: Thermoplastic road marking paint shall be applied as per manufacturer's instruction alongwith MORTH technology and speciality.)
Material and labour for applying liquid anti stripping agent (Wet bond) for hot mix ashphalt, use 0.02 to 0.06 % by weight of bitumen (0.2 to 0.6 Kg per MT of bitumen) through direct injection in hot bitumen stream in hot mix plant using an automatic precise dosing device (to be preinstalled in hot mix plant) for renders minimum stripping (breaking) of bonds between the aggregate surface and the bitumen all as per manufacturer's instruction complete all as specified and directed.
Supply and fixing in repair of road stud two way reflective type, alluminium alloy body of size 110mm x 120mm x 24 mm with 50 mm shank size fixed with adhesive / solvent complete all as specified and directed.
Supply and fixing in repair of metal tubular delineator made out of ABS round body fitted with 2 Nos. 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastmore 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) of size 150mm x 150mm x 300mm and necessary earthwork complete all as specified and directed.
Supplying and fixing of retro reflective overhead informatory road signage (1.20 x 1.50 M) and boards, made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lense type heat activated retro reflective sheeting conforming to type-III of ASTMD-4956-01 as approved by GE, letters, borders etc. as per IRC: 67-2000 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work fixed to vertical post of 50x50x5 mm angle of 3.75 m long both side. Steel work shall be painted with two coats of epoxy paint over and including appropriate priming coat including embedding below ground level in PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in foundation of size 450 x 450 x 600 mm including necessary excavation and making good surface including taking down of old informatory road signage board complete all as specified and directed.
Supply and fixing in repair high intensity UV Stabilized reflective sheet 50mm wide of red & white / orange colour as required to be fixed on tubular steel poles or comented poles or any other areas complete all as specified and directed.
Supply and fixing in repair speed breaker of size 730x245x70 mm made out of ABS material with two highly reflective reflectors moulded in PMMA material welded with ABS plate through ultrasonic welding process and fixed on the specified breaker complete all as specified and directed.
Supply and fixing in repair convex mirror made out of polycarbonate material provided with 2700mm size of MS pipe post duly powder coated and should have clear and definite mirror image having 130 degree of viewing angle and unbreakable and stronger than glass of size 1000 mm dia fixed on 40 mm dia MS pipe of 1200 mm long including embedding below ground level in PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in foundation of size 300 x 300 x 450 mm including necessary excavation and making good surface complete complete all as specified and directed.
M/s K P Enterprises
M/S SANJAY ENTERPRISES
M/S VIKASH TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .