Proposed Interior Works for the Engineering Exploration Lab at the Academic Complex Building, COEP Technological University, Pune.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing and fixing 100 mm thick factory made reinforced AAC partition wall panels of 600 mm width having tongue and groove joints, fixed in position with approved jointing mortar, GI/steel connectors, anchor fasteners and necessary cutting, chasing, finishing, scaffolding and making good complete as directed by Engineer-in-Charge.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.As directed by engineer-in-charge

Providing & applying Gypsum plaster of average thk up to 10mm on any vertical surface (unplaster masonry surface / concrete surface) including door & window jamb as directed in true line, level and plumb at all levels & places including providing double legged scaffolding, making sharp edge at corner of wall, beam etc. complete as per specification & as directed by Engineer-in-charge. Rate to include manufacturingg & shiftng of gypsum bags ( manually or by other means) for all lead & li s, providing and fixing 150 mm wide Alkali resistant ber glass mesh (145 gsm) on concrete-masonry junctions and grooves chased by di erent services agencies for electrical / plumbing / any allied services etc. complete

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Bd.M.3 Page No. 380

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircase of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Spec. No: - Bd. M . 3B Page No. 380

Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.

Providing and fixing Kota stone skirting of 20–25 mm thickness, machine cut and mirror polished, set in cement mortar 1:4 including backing, jointing with neat cement slurry, finishing joints, curing, and complete as per SSR specifications of Chapter 33, including all materials, labour, and incidental charges.

Providing and applying interior wall finish luster of Asian / Berger / Nerolac / Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian / Berger / Nerolac / Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.) - Work is to be done at any floor and at all heights