REPAIRS TO JOINERY, ROOF TREATMENT, FLOOR TILES, SUNKEN TREATMENT AND ALLIED WORKS AT VIMAN NAGAR, CHANDAN NAGAR AND SOUTH RUN WAY FOR SMQS AND OTMS UNDER GE (AF) LOHEGAON AT AF STN PUNE

Amount

Taking down existing water proofing treatment by Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, scrubbing down with water etc. complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick works on wall / Concrete surfaces finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed ( With using liquid WPC of 200ml per 50Kg Cement Weight. Note:-WPC shall be measured and paid seperately.

M&L Preparation of surface and applying two coats of hot bitumen blown 85/25 to concrete surfaces at the rate of 1.2 kg. per sq. m per coat complete all as specified & directed.

M&L for roof treatment using APP based polymeric membrane, minimum weighing 3 kg / sqm and minimum 3 mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application with side over lap 75 mm and end lap minimum 100 mm and sealing over lap and joints as per manufacturer's instructions complete all as specified and directed.

Supply only liquid waterproofing compound.

M&L 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in roof for levelling course finished even and fair without using extra cement complete all as directed by Engr-in-charge.

M&L for two coats of aluminium paint above the new untreated APP membrane complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving's not exc 15 cm thickness (below or above ground level)

M&L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for jointfree non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

All as per Item No 13 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as directed.

M&L for joint free Glazed Ceramic Coloured Tiles, 450X300X7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 30 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia complete all as specified and directed.

S&F for GI tubing 15mm dia medium grade with all fittingS&Fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

Refixing old steel tubing and connections ,galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm bore in new or old position complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia complete all as specified and directed.

S&F for GI tubing 20mm dia medium grade with all fittingS&Fixtures complete laid in trenches fixed in repairs complete all as specified and directed.

Refixing old steel tubing and connections ,galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm bore in new or old position complete all as specified and directed.

Disconnecting existing exc 250 nexc 500 Ltr tanks, setting aside (or lowering if required) for repairs, cleaning, etc removing scale and durt from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Disconnecting existing 1000 Ltr tanks, setting aside (or lowering if required) from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding complete all as specified and as directed. Make : Hindware or equivalent

S&F in repair 15 mm dia CP brass PVC connection 60 cm long including check nuts etc complete all as specified and directed

M&L in repair for 15 mm bore bib tap chromium plated cast copper alloy with wall flange complete all as specified and directed Make :Prayag/hindware/Jaguar

Dismantling water tanks of any type of capacity exc 250 but n.exc 500 liters and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

Dismantling water tanks of any type of capacity exc 500 liters but n. exc 1000 ltrs and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

S&F of Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20mm bore pipe complete all as specified and directed.

S&F in repair PVC low level flushing system plastic valve with inlet ball valve float chain and ball (of capacity 10 liters) ISI Marked incl 32mm PVC flush pipe complete all as specified and directed Make :Hindware

S&F in repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back, including providing CI brackets, fancy type CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, iincl 32 mm dia all as specified and as directed. Make Hindware

S&F in repair angle valves fancy , cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed Make :Prayag/hindware/Jaguar

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

S &F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

S &F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed. Make :Prayag/hindware/Jaguar

S &F in repair 15mm dia stop valves cast copper alloy, screwed donw high pressure with crutch or butterfly handle screwed both ends for iorn pipe or for unions and fixed (concealed type) all as specified and directed. Make :Prayag/hindware/Jaguar

S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified and directed

S&F CP soap case all as specified and directed Make: Prayag Cat no BA-15S or equivalent in Hindware or Jaquar

Demolition and breaking up drain pipes Upto 150 mm (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

All as per item no 44 above but 110mm dia

M&L in repair for PVC (SWR) bends of any radius with oval and access door of 75mm dia

All as per item no 46 above but 110mm dia

S &F in repair 110mm dia of PVC (SWR) branch piece, single T, equal or unequal all as specified and directed.

S &F in repair 75mm dia of PVC (SWR) branch piece, single T, equal or unequal all as specified and directed.

M&L in repair PVC (SWR) vent cowl of 110mm dia

S&F in repair pvc SWR floor trap of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4).

Supply and fix in repair waste coupling of PTMT (full threaded) (minimum weight 32mm - 45 gms) suitable for wash hand basin complete all as specified

Supply and fix in repair waste coupling of PTMT (full threaded) (minimum weight 40mm-60 gms)) suitable for sink complete all as specified

S&F in repair Grating doom 100mm dia of Stainless steel with holes for waste pipes all as specified and directed. Make: Prayag Cat no FT-04M or equivalent in Hindware or Jaquar

S&F I repair corner glass self 300mm (with ABS Brackets )300 X 600mm Cat N o -BEA-46 Prayag or equivalent in Hindware or Jaquar

S&F in repair Grating doom 100mm dia of stainless steel all as specified and directed.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge

M&L for 6mm thick slope or flat ceiling board, on non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws all as specified and directed.

M&L Anodised aluminium snap grid size 605 x 605 mm frame work for false ceiling and hangers 6mm dia G. I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each

Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm.

Taking down chowkat with shutter without taking out shutter from the frame n.exc 1 Sqm.

Taking down shutter of any description but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed .

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

S&F 200 mm long, aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm long, aluinium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and directed.

S&F Stainless steel butt hinges 100mm long complete all as specified and directed.

S&F 150 mm size handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed.

S&F 300 mm long MS sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S&F for 300 mm, MS ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

M&L for 165mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M&L for 105mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M&L for Providing, cement concrete type B0, 1:3:6 (12.5 mm graded aggregate)for chawkat filling as required all as specified and directed by engineer in charge.

M&L for Factory made of 35 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc for window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed .

M&L for Factory made of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides: supplied and fitted to chowkats complete all as specified and directed .

S &F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete but without glazing bars, dovetailed or welded all as specified and directed.

S &F Steel windows with side hung shutters including box type side hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.

S&F Stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F 3.0 mm thick figured glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.

S&F in repair 3.0 mm thick plain sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.

S&F in repair Stainless steel Harrison rail 20 mm Dia(Curtain rod)s,all as specified and directed.

S&F Fancy type CP brackets for curtain rods with 1mm thick plate complete all as specified and directed.

M&L Preparation of new surfaces of wood and wood based surfaces and applying two coats of synthetic enamel paint over one coat of pink primer of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

M&L Preparation of new painted surfaces of steel and applying two coats of synthetic enamel paint over one coat of red oxide to steel surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

S&F in repair ms Mortice lock, vertical type, size 100 mm, long 4 levers with handles as in repairs complete all as specified and directed.

Taking down and refixing shutter after repair of any description exc 1 Sqm but n. exc 2 Sqm each in same opening complete all as specified and as directed.

S&F in repairs for 300 mm, ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed .

S&F in repairs for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S&F in repairs for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S&F in repairs for 250 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete

M&L rendering 15mm thick on surface of brick work/concrete surface in CM 1:4 and is to be finished even and smooth with out using extra cement complete all as specified directed

M&L for 5mm thick cement plaster in CM 1:3 onceilingand finishing the surface even and smooth (without using extra cement) etc.

M&L for 10mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.

M&L for preperation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

All as per item no 101 above but on walls.

M&L for newly plastered surfaces Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of alkali resistant primer including making good the surface complete all as specified and directed.

M&L for prepartion of newly plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant primer on wall complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise not otherwise specifically provided for

M&L for 75mm thick PCC in (1:2:4) type B1 using 20mm graded stone agg as in sunken floor complete all as specified and as directed

M&L for PCC 1:5:10 type E2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:1½ : 3 or Bitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as specified and directed.

M&L for Bitumen blown 80/25 applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as specified and directed.

M&L for polythene flim black 50 micron laid in sunken floor complete all as specified and directed.

M&L for spout of 50mm bore GI pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed

M&L for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone agg as in sunken floor mixed with water proofing comound finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately)

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed.

M&L for Cement concrete tiles 300 x 300x20mm thick, m a c h i n e pressed; set jointed and pointed in neat cement slurry with grey cement and no pigment in floors, and cut and polished and including 15 mm thick screed bed in CM (1: 6) complete all as specified and directed.

S &F of 125mm Hasp and staple, safety type, Aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

M/L for 18 MM thick Block boards, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber and nails for storage almirah to the sizeand as directed by Engr-in-charge.

M/L for 12mm thick plywood BWR grade type BB fixed with fevicol and nails for working table / storage almirah to the size and as directed by Engr-in-charge.

S&F in repair door closer hydraulically regulated of cast iron body, designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

Fixing in repair aluminium chowkats / frame for door, windows and ventilator complete all as specified and directed.

S&F Aluminium beads with rubber gasket 20 mm width complete all as specified and directed.

S&F for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

S&F for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, hinges etc. complete all as specified and directed.

S&F 12 mm Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work complete all as specified and directed.

S&F 12 mm Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed in repair with screws to timber frame work complete all as specified and directed.

S&F Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Sheet glass 5.5 mm thick fixed in repair ordinary quality and glazing with oil putty,beads in square exc 0.5 sq. m in each pane including hacking out old broken glass complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

M&L for MS pipe 23-25cm dia, 5.5 mtr length with holder 02 Nos and roller wheel etc grinding, finishing and threading complete all as specified and directed

M&L for MS shoft solid 10cm dia fabricating, polishing welding, coupling holder etc. complete all as specified and directed

M&L for 02 Nos frame and bracket, nut bolt, angle 45 X 45 X 5mm and 4mm thick MS sheet etc complete all as specified and directed

M&L for 02 Nos MS wheel 20cm dia (inside and out side), bearing, locking rod and chain over GI cover with necessary fittings complete all as specified and directed

M&L for standard submersible type electric motor 1.5 HP, MCB, sensor, 3 core electric cable incl necessary wiring, switch box, oil greesing, aligment and 5.5 mtr wide GI sheet cover with two coat of oil emulsion paint over pink primer complete all as specified and directed

S&F 75mm wide 1.25mm thick MS profile for rolling shutter, riveted/welded necessary including taking out unserviceable profile and two coat of paint over one coat of red oxide complete allas specified & directed

S.R.M.K Enterprises

RK ENTERPRISES

ARK ENTERPRISES