SPECIAL REPAIRS TO BUILDING NO T-31(UNIT KOTE) AND T-66 OF 134(I) WKSP EME (SIG GP) AT DUNKIRK LINES OF AGE B/R-II, BUILDING NO.T-54 (04X ORS MD ACCN, A, B, C AND D) AT MW LINE 512 ARMY BASE WORKSHOP OF AGE B/R-I UNDER GE (CENTRAL) KIRKEE.

Amount

Taking down chowkats and frame area n.exc. 1.5 sqm each including shutters without taking off shutters from the frame and removing from site complete all as specified and as directed.

Taking down chowkats and frame area exc. 1.5 sqm but n.exc. 4.00 sqm each including shutters without taking off shutter from the frame and removing from site complete all as specified and as directed.

Taking down shutters of any description area exc. 1.00 sqm but n.exc. 2.00 sqm each and removing form site complete all as specified and as directed.

Taking down shutters of any description area not exc. 1.00 sqm each and removing form site complete all as specified and as directed.

Supply and fix pressed steel frames, made out of MS sheet. size 125x60mm for doors and ventilators with double rebates including necessary fixing lugs, hinges, lock strike plate etc, including providing PCC (1:2:4) type B1, using 20mm graded stone aggregate to fill the frame and making good complete all as specified and as directed by Engr-in-Charge.

Supply and fix pressed steel frames, made out of MS sheet. size 105x60mm for doors and ventilators with double rebates including necessary fixing lugs, hinges, lock strike plate etc, including providing PCC (1:2:4) type B1, using 20mm graded stone aggregate to fill the frame and making good complete all as specified and as directed by Engr-in-Charge.

Supply and fix 35 mm thick factory made shutters of second class hard wood, plain framed, panelled shutters (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkat complete all as specified and as directed by Engr-in-Charge.

Supoply and fix 35 mm thick factory made second class hard wood glazed /gauged and skelton door shutters, factory made, open rebated and prepared to receive glass/guage etc. (without sash bars) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc., size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified and as directed by Engr-in-Charge.

Supply and fix galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

Supply and fix 30 mm WPC door shutters decorative on both sides , "RAJSHRI " brand factory made 100% solid WPC (Wood polymer Composite) of required size comprising of virgin PVC resin of K value 57-60 (suspension Grade), calcium carbonate and natural fibres and non toxic additives made from extrusion process WPC foam sheet, single extruded (inner) with density not less than 650 Kg/Cbm manfactured by "RAJSHRI" an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of 2000 N (Face) & 1100 N (edge), minimum Compressive Strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance of spread flame of Class A ctegory with Property of being Termite/Bore Free,Water/Moisture Proof, Fire Retardant and fixing with stainless steel butt hinges of required size with necessary full body star headed counter sunk SS screws complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Supply and fix in mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate fixing in wooden or steel door frame using nails or welding complete all as specified and as directed.

Supply and fix 100mm long stainless steel medium weight but hinges for door shutter and frames/welded to frames complete all as specified and as directed.

Supply and fix in repairs 150 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floors complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II. complete all as specified and as directed.

Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as specified and as directed by Engineer-in-charge.

Supply and fix aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and as directed.

Supply and fix aluminium anodised handles 200 mm long, fabricated type, fixed with screws , complete all as specified and as directed by Engr-in-Charge.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and including fittings etc complete all as specified and as directed by Engr-in-Charge

Material and labour for black granite work 15 to 20 mm thick (table rubbed and polished ) as in steps, jambs, pillars, window- cills, and in vertical surfaces over 15mm thick backing coat in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab rubbing, polishing and rounding to edges complete all as specified and as directed.

Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specified and as directed by Engr-in-Charge

Supply and fix for rolled mild steel frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamal paint complete all as specified and directed.

Material and labour for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified

Material and labour preparing old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and fix rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering,doors, gates etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W(Gde- E-250) quality-A complete all as specified and as directed.

Supply and fix rolled mild steel plain, black sheeting as in iron doors and gates welded to angle iron frames by using 1.25mm thick sheet, sides with welded or shouldered joints provided, complete all as specified and as directed.

Supply and fix rolled mild steel roof trusses (framed), trussed, rafters, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe- 290 (Gde E-165) complete all as specified and as directed.

Removing old tar felt, all loose dirt, old roof tiles, cement plaster, cleaning the concrete surface, including removal & cleaning of vegetation, fungus, moss, small trees etc., from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after roof treatment complete all as specified and directed by Engineer-in-Charge. NOTE :- Rate for refixing of lightening conductor deemed to be included in the quoted rate.

Material and labour for 25 mm thick plain cement concrete, (1:2:4), type B1 using 20mm graded crushed stone aggregate as in leveling course as in roof, mixed with and including integral liqiud water proofing compound all as per manufacturers instructions as in roof and floor complete all as specified and as directed. NOTE :- Rate for WPC shall be deemed to be included in the quoted rate.

Material and labour for rendering 10mm thick on existing concrete surfaces of roof in CM (1:4), mixed with and including integral liqiud water proofing compound all as per manufacturers instructions finishing even and smooth without using extra cement to receive water proofing treatment complete all as specified and directed by Engineer-in-Charge. NOTE :- Rate for WPC shall be deemed to be included in the quoted rate.

Material and labour cleaning of existing plastered surfaces and applying oil bound bitumen primer @ 0.3 kg/Sqm and providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.00 kg/sqm, reinforced with non woven polyester reinforcement matt weighing not less than 160 gm/Sqm polyester core, having softening point not less than 150°C, longitudinal tensile strength not less than 650 N/ 5 cm, tearing streangth of 180 N / 5 cm, torch application method, with a overlap of 100mm at the sides and 150mm at the ends and sealing and applying a coat of solar reflective aluminium paint @ 0.2 Kg/sqm on membrane surfaces complete including carrying out 24 hrs ponding test over the complete treatment all as specified and as directed by Engineer in charge.

Demolition of brick /stone walls built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for brick work with sub class 'B' brick straight or curved on plan built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for taking down cement or cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rendering 12mm thick on fair faces of brick or concrete surfaces of wall in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick cemet plalster in CM (1:4 )over wall / concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for 5mm thick rendering on concrete surface of ceiling in CM (1:3) and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new plastered wall surfaces all as per manufacturer's instructions, applying two coats of water proofing exterior emulsion paint of approved tint over a coat of primer / base coat as per manufacturer's instructions complete all as speicifed and as directed by Engineer-in-Charge. MAKE:- Apex Ultima Protek Asian paints, Nerolac exel top guard, berger weateher coat long life 10 years.

Material and labour complete removal of existing treatment, preparation of plastered or unplastered wall surfaces as per manufacturer's instructions, applying two coats of water proofing exterior emulsion paint of approved tint over coat of primer / base coat as per manufacturer's instructions complete all as speicifed and as directed by Engineer-in-Charge. MAKE:- Apex Ultima Protek Asian paints, Nerolac exel top guard, berger weateher coat long life 10 years.

Material and labour preparation of new plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound emulsion distemper of approved tint over a coat of primer complete all as specified and as directed by Engr-in-charge.

Material and labour preparation of old plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound emulsion distemper of approved tint complete all as specified and as directed by Engineer-in-charge.

Material and labour for applying three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and as directed by Engr -in-charge.

Material and labour for one coat of white wash on ceiling including preparation of old decorated surface complete all as specified and as directed by Engr -in-charge.

Material and labour for two coats of white wash on walls including preparation of old/new decorated surface complete all as specified and as directed by Engr -in-charge.

Material and labour for preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moos efflorescent and trading oil and greasy spots and applying two coats of cement base paint of approved tint over a coat of primer complete all as specified and as directed by Engr -in-charge.

Material and labour for plain cement concrete type B1 (1:2:4), using 20mm graded stone aggregate as in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and as directed by Engr -in-charge.

Dismantling existing tanks exc. 500 ltr and n.exc. 1000 ltr removing to store complete all as specified and as directed.

Supply and fix rotational moulded polyethylene water storage tank consisting of four layer cylindrical vertical with top closed hoisted and fixed in position all as specified and directed capacity 1000 ltrs complete all as specified and as directed by Engr -in-charge.

Supply and fix in repairs 20 mm dia gun metal ,globe or gate valves , with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fix in repairs 20 mm dia ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores for 15mm bore complete all as specified and as directed.

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores for 20mm bore complete all as specified and as directed.

Supply and fix 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and as directed by Engr-in-charge.

Supply and fix 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floors complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs bib tap long body cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or for brass ferrule for 15 mm bore of pipe complete all as specified and as directed. MAKE :- Prayag Cat Part No : 9106 or techno commercially equivalent makes specified in PS.

Supply and fix in repairs angle cock cast copper alloy chromium plated, fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed. MAKE :- Prayag Cat Part No : 9110 or techno commercially equivalent makes specified in PS.

Supply and fix in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes 15mm bore dia all as specified and directed. MAKE :- Prayag Cat Part No : 9102 or techno commercially equivalent makes specified in PS.

Material and labour for PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix in repairs fancy type stop cock (concealed) cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screw down ,screwed both ends for iron pipe or for brass ferrule with long shank and cup for 15 mm bore of pipe complete all as specified and as directed. MAKE :- Prayag Cat Part No : 9120 or techno commercially equivalent makes specified in PS

Supply and fix in repairs CP shower rose 225mm dia round with arm and flange including fixing to steel pipe complete all as per Prayag Cat Part No BS-30 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repairs shelf of PTMT corner shelf 8 inch fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified as directed

Supply and fix in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge. MAKE :- Prayag Cat No BA-15 or techno commercially equivalent makes specified in PS

SSupply and fix Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,all as per CERA Cat No CALINA S 3010102 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repairs complete all as specified and as directed.

Supply and fix in repairs viterious china wash basin white flat back size 450 x 400 mm excluding taps waste chain and plug and porcelain stopper but including necessary brackets CP wastes and other fittings complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers & wastes including CI cantilever bracket and connection to union pipe over all size 915mmx460mm and bowl size 410 x330x160mm complete all as specified and as directed by Engr-in-charge. MAKE :- Prayag Cat No. 1239D or techno commercially equivalent makes specified in PS

Supply and fix 32 mm bore PVC waste pipe of approved make suitable for WHB, urinals etc complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair PVC floor trap, square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and as directed by Engr-in-charge.

Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs towel rail 600 mm long of PTMT fixed with and including chromium plated brass screw and wooden / plastics cleats (min wt 170 gms) complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs of 110 mm dia PVC (SWR) pipe, type 'B', single socketed in any length with rubber ring joints laid in trenches,floors and walls including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) pipes type 'B', single socketed in any length with rubberring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

Supply and fix 110mm dia (bore of pipe) PVC bends (any radius), type 'B', diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) bends type 'B', 75mm dia bore any radius with access door complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) branch piece, type 'B', single (single Y) 110 mm dia equal or unequal complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) branch piece, type 'B', single (single Y) 75mm dia equal or unequal complete all as specified and as directed.

Supply and fix in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

Supply and fix in repairs 110mm bore PVC (SWR) junction single (Single T) type 'B', equal or unequal complete all as specified and as directed..

Supply and fix in repairs 110mm bore PVC (SWR) vent cowl type 'B', complete all as specified and as directed.

Supply and fix in repairs 75mm bore PVC (SWR) vent cowl type 'B', complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Supply and fix coloured non skid ceramic coloured tiles 300 mm x 300 mm x 6 to 7mm thick,as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. MAKE:- SOMANY (AZZARO BEIGE, VISTOS MATCHING FLOOR SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour glazed ceramic colour tiles as in vertifical surface 450x350x7mm / 450x300x7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over including 10mm thick renderting backcoating in cement mortar (1:4) complete all as specified and as directed. MAKE :- SOMANY (AZZARO BEIGE, VISTOS MATCHING FLOOR SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour glazed ceramic coloured tiles as in vertical surfaces 600x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed. MAKE :- SOMANY (ELOGIO LIGHT, GLOSSTRA SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour for 75mm thick plain cement concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in subbases of floors complete all as specified and as directed.

Material and labour for machine cut mirror polish Kota stone slab flooring 18-20 mm thick over 15 mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,providing lines at edge of corners rubbing and mirror polishing complete all as specified and as directed.

Material and labour for machine cut mirror polish kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed.

Material and labour for marble makrana white stone 18 to 20 mm thick as in border of floorings laid over and including 15 mm thick cement screed base in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and mirror polishing complete as specified and as directed by Engr-in-charge. NOTE :- Marble makrana white border to be done in Kota stone flooring under relevant schedule Sl Item No 91 wherever as directed by Engr-in-Charge.

Supply and fix in repairs stainless steel fancy type curtain rod 25 mm dia including SS brackets, decorative knobs, including all necessary fittings such as rawl plug screws complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour 75 mm thick plain cement concrete (1:3:6), type C2 using 40mm graded stone aggregate laid in panels surface finished even and smooth without using extra cement as in plinth protection / path complete all as specified and as directed.

Dismantling of precast interlocking paver blocks laid dry of any description thickness and size complete all as specified and as directed.

Material and labour for 25 mm to 50 mm thick crushed stone dust/sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for 80mm thick machine pressed glossy finish precast concrete interlocking paver blocks, any shape, size and colour M-40 grade with grey cement and pigment conforming to IS 15658-2006 complete all as specified and as directed.

Material and labour for machine cut cudappa stone slab 20-25mm thick as in shelf vertical or horizontal, as in steps, jambs, pillars, cooking platforms, and like over 15mm thick cement screed base in CM (1:4) and jointed in grey cement slurry mixed with pigment to match with shade of the slab, rubbing, polishing and rounding to edges complete all as specified and as directed.

Material and labour for pre cast cement concrete solid block masonry type B1 (1:2:4) using 20 mm graded stone aggregate with solid blocks, exc. 10 cm in width set in CM (1:6) complete all as specified and as directed.

Supply and fix pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated steel sheeting or AC sheeting as in roof covering complete all as specified and as directed.

Supply and fix pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering as in ridges / cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated steel sheeting or AC sheeting in roof covering complete all as specified and as directed.

Dismantling old ceiling boards of any description including cover fillets, grid (fibre, pulp, insulation, etc.) or insulation boards / slabs any thickness, including cover fillets complete all as specified and as directed.

Supply and fix interlocking aluminium alloy anodised snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm ( of length 600mm) to be interlocked at the centre of 1200mm x 600mm panel to form a grid of 605mm x 605mm and wall angle 25mm x 25mm x 2mm aluminium alloy extruded sections, aluminium anodised (minimum 15 micron ) conforming to IS 733, IS 1285 and IS 737. including hangers of GI wire 6mm dia (upto1200mm length) adjusting level fixed to roof by means of ceiling cleats made out of flat iron 40x3mm size and 60 mm long expansion hold fastners 12.5 mm dia, 40 mm long complete all as specified and as directed.

Supply and fix gypsum board 8 to 9 mm thick as in ceilings fixed with screws as per manufacturers instructions complete all as specified and as directed.

Material and labour for polished digital coloured ceramic tiles of size 1200 x 600 x 8-9 mm thick of approved shade and design set and jointed with neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. MAKE :- SOMANY(GRANDE VEGAS GOLD FP, DURAGRES SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour polished digital coloured ceramic tiles of size 1200 x 600 x 8-9 mm thick of approved shade and design as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including backing coat 10mm thick in CM (1:4) complete all as specified and as directed. MAKE :- SOMANY(GRANDE VEGAS GOLD FP, DURAGRES SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Supply and fix powder coated aluminium door made out of hollow extruded aluminium section as specified below:- Each door having 02 Nos of disc or D type handles, 02 Nos of aluminium tower bolts, 200 mm / 250mm size one aluminium sliding door bolt, one brass mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu/TITZ), shutter to be partly glazed with 5 mm thick tinted glass and partly panelled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading / gasket anodized aluminium beading screws complete using following aluminium sections:- Chowkat frame : 101.60x44.45x1.55 mm Shutter verticle/stile: 85.00x44.45x1.56 mm Shutter middle rail : 83.50x44.45x1.54 mm Shutter top and bottom rail : 110x44.45x1.54 mm Make (i) Anodized aluminium section : Jindal / Hindalco / Indalco (ii) Particle board : Novapan / Duratuff (iii) Glass : Saint Gobain / Modi Guard / TATA

Supply and fix in repairs 18-19mm thick prelaminated particle board, prelaminated both sides, grade 2 quality, interior grade, commercial type including 6 mm thick teak wood lipping, as in shelfs of cupboards, kitchen cabinet, pelment box and in similar works complete all as specified and as directed.

Supply and fix continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm complete all as specified and as directed.

Supply and fix in repairs 100mm hasp and staple, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Material and labour for 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

Material and labour for 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

Supply and fix 300mm long mild steel sliding door bolts, bolt or clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed

Demolition of existing lime concrete of any description and in any position not otherwise specifically provided for, incl removing of debries all as specified and as directed .

Material and labour for plain cement concrete, (1:5:10), type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as in sub bases of floors complete all as specified and as directed.

Supply and providing water proofing treatment to the sunken portion areas all as specified under :- (a) Preparation of sunken surfaces of wall or concrete and providing 10 mm thick rendering in cement mortar (1:3) mixed with WPC @ 3 % by weight of cement and applying evenly a coat of blown bitumen at the rate of 1.5 kg per Square metre and binding with clean dry sand @0.005 Cu.m per square metre complete all as specified and as directed. (b)GI pipe 40m bore light grade shall be embedded as outlet at the lowest portion for slope on the wall extending upto at least 450 mm beyond the outer wall. NOTE :- Rate for WPC shall be deemed to be included in the quoted rate.

Material and labour for 20mm thick cemet plalster in CM (1:4), over stone wall / concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for applying three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and as directed by Engr -in-charge.

Supply and fix rotational moulded polyethylene water storage tank, whigte, ISI mark embosed on it consisting of three layers, cylindrical vertical with top closed hoisted and fixed in position all as specified and directed capacity 500 ltrs complete all as specified and as directed.

Refixing 15mm bore old steel water tubing and connections in new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

Refixing 20mm bore old steel water tubing and connections in new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

Supply and fix viterious china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings complete all as specified and as directed by Engr-in-Charge.

Supply and fix grating doom 125 mm dia with/without waste hole of SS complete all as specified and as directed.

Material and labour for 25 mm thick plain cement concrete (1:2:4), type B-1 using 20mm graded crushed stone aggregate as in leveling course including demolition of existing PCC complete all as specified and as directed.

Material and labour for 100mm thick plain cement concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in subbase over rammed earth complete all as specified and as directed.

Taking down un serviceable copper/aluminium point wiring (light, fan, socket, power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets etc., removing materials to store for keeping in safe custody or for offering credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc complete all as specified and as directed by Engr-in-Charge.

Material and labour for light point with two single core PVC insulated multi stranded FRLSH copper conductor cable of size 1.5 sq.mm drawn in and including PVC casing caping of required size with all fittings and accessories alongwith green colour FRLSH Copper conductor cable of size 1.5 sq.mm as earth lead and connected to earth dolly including PVC switch board and accesories of required size and making good to disturbed surfaces complete all as specified and as directed. NOTE :- One phase, one neutral and one earth of copper wire will measured as one point complete all as specified and as directed by Engr-in-Charge.

All as per Sl Item No. 130 above but for one fan/exhaust fan point with cables of 1.5 sq.mm size complete all as specified and as directed.

All as per Sl Item No. 130 above for one two way switch point with cables of 1.5 sq.mm size on independent board complete all as specified and as directed.

All as per Sl Item No. 130 above for one three pin 5 Amps socket outlet point with cables of 1.5 sq.mm size on independent board complete all as specified and as directed.

All as per Sl Item No. 130 above for one three pin 5 Amps socket outlet point, with cables of 1.5 sq.mm size on same board complete all as specified and as directed.

All as per Sl Item No. 130 above but FRLSH copper stranded cable of size 2.5 sq mm for 3/6 pin socket outlet 15 Amps on one independent board along with all fittings and accessories complete all as specified and as directed complete all as specified and as directed by Engr-in-Charge.

Material and labour for sub main wiring with two single core PVC insulated multi stranded FRLSH copper conductor cable of size 4.0 sq.mm drawn through in and including PVC casing caping of size with all accesories and one single core green colour FRLSH copper conductor cable of size 4.0 sq.mm as earth wire and connected to earth dolly and making good to disturbed surfaces including taking down the existing complete all as specified and as directed. NOTE :- (a)Two run of cable with one run of earth wire and one run of casing capping will be measured as one unit (RM)

Supply and fix Switch piano flush type 5 Amps, single pole one way complete all as specified and as directed by Engr-in-Charge.

Supply and fix lamp holder of PVC/ Polycarbonate type with back plate complete all as specified and as directed.

Supply and fix socket flush type 6 Amps, 5 pin, 230v complete all as specified and as directed.

Supply and fix switch socket combination multipurpose 2-in-1 flush type 3 pin 16 Amps and 3 pin 6 Amps, 230v complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite three terminal all including dismantling / taking down un serviceable one complete all as specified and as directed.

Supply and fix sheet metal enclosure SPN 08 way (MCB DB) double door, 240 Volts AC of complete all as specified and as directed. MAKE :- Schneider /ABB/Legrand or eqvt

Supply and fix MCB, SPN (double pole) 32 Amps, 240 Volts, 10 KA ‘’C” curve of complete all as specified and as directed. MAKE :- Schneider / Legrand/ABB or eqvt

Supply and fix MCB, single pole, 5 to 32 Amps, 240 Volts, 10 KA breaking capacity, ‘’C” curve of complete all as specified and as directed. MAKE :- Schneider / Legrand/ABB or eqvt.

Supply and fix LED light batten 20 watt,4 feet AC, PF-0.95 (min), sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and directed by Engr-in-Charge. MAKE :- Wipro cat part No-LL20-221-XXX-65AL1 and equivalent in CG/Philips/Havells

Supply and fix LED light batten 10 watt, 2 feet AC, PF-0.95 (min), sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and as directed by Engr-in-Charge. MAKE : - Wipro cat part No-LL20-111-XXX-65NE3 and equivalent in Wipro/Philips/Havells

Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engr-in-Charge. MAKE :- CG or equivalent to Havells/Wipro/ Philips

Supply and fix LED lamp 9 watt, CDL, E-27 230V, PF-0.95 (min) complete all as specified and as directed. MAKE :- CG or equivalent to Havells/Wipro/ Philips

Supply and fix LED building security light 20 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener complete all as specified and as directed by Engr-in-Charge. MAKE :- CG Cat Part No LSTS-20-CDL-M or equivalent in Philips/wipro

Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engr-in-Charge. MAKE :- Havelles/ Bajaj / Usha NOTE :- Old Unsv fan deposited to MES Store.

Supply and fix exhaust fan metal body light duty 300 mm sweep 230 volt AC complete with frame and Louvers incl making of suitable hole in brick / stone wall for fixing of exhaust fan complete all as specified and as directed by Engr-in-Charge. MAKE :- Havells/Almonard/ Crompton Greves or eqvt. NOTE :- Old UNSV Exhaust fan deposit to MES store

Material and labour for earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2 with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS complete all as specified and as directed by Engr-in-Charge.

Supply and fix 5 Amp switch piano type single pole two way complete all as specified and as directed. MAKE :- Anchor or equivalent

Supply and fix bell push piano type one way 240 volt complete all as specified and as directed. MAKE :- Anchor or equivalent

Supply and fix switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v complete all as specified and as directed. MAKE :- Anchor or equivalent

Supply and fix flush type electronic fan regulator with 5 step type, 240 Volts AC, 50 Hz complete all as specified and as directed. MAKE :- Anchor or equivalent

Supply and fix call bell electric, ding dong, AC 240 volt, 50 HZ. complete all as specified and as directed. MAKE :- Anchor or equivalent

Supply and fix MCB DB double door 4 way TPN vertical, 240 volts complete all as specified and directed by Engr-in-Charge. MAKE :- Schneider / Legrand/ABB or eqvt

Supply and fix MCB TPN 40-63 Amps, 415 volt 10 KA complete all as specified and as directed by Engr-in-Charge. MAKE :- Schneider / Legrand/ABB or eqvt

Supply and fix LED lamp 12 watt, CDL, E-22/27 230V, PF-0.95 (min) complete all as specified and directed by Engr-in-Charge . MAKE :- CG or equivalent to Havells/Wipro/ Philips

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutters, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250mm complete including making of suitable hole in brick / stone wall for fixing of exhuast fan complete all as specified and directed by Engr-in-Charge. MAKE :- Havells/Almonard/ Crompton Greves or eqvt. NOTE :- Old UNSV Exhaust fan deposit to MES store.

M/S KISHAN CONSTRUCTION

Aishwarya Constructions

ShreHari Civil Enginneering and Contractors