Construction of Meeting Hall Building in campus, Cane Society ltd.-Noorpur District (Bijnor).

SITE CLEANING: Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance

CLEARANCE OF GRASS: Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

E/W in excavation of foundation in ordinary soil.as per Si no 251 (a)

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8km., from the site of work & including watering , dressing etc. Rate includes cost of all materials , labour and T&P etc. required for proper completion of work. (Including Royalty) S.O.R-255

E/w in filling with ordinary soil in plinth excavation to be in the form of regular pits not exceeding .50 M in depth and earth work in embankment (Excluding royality)

Conc with 4 Cm gauge Stone ballast Coarse sand of 2.20 FM and cement in proportion of (1:4:8) in foundation and under floors including supply of all materials As per si no 281

Providing and Injecting chemical for preconstruction antitermite treatment and creating and chemical barrier under and arround the column pits wall trenches basement excavation top surface in plinth filling junction of wall & floor laying labour,tools and plants etc complete as per si no N.item

R.C.C. (1:2:4) with cement ,approved coarse sand &2 cm gauge stone girt for Raft foundation SI no-287

R.C.C. (1:2:4) with cement ,approved coarse sand &2 cm gauge stone girt for SI no-283 (A)

R.C.C. (1:1.5:3) with cement ,approved coarse sand &2 cm gauge stone girt for slab SI no-284 (A)

R.C.C. (1:1.5:3) with cement ,approved coarse sand &2 cm gauge stone girt for columns & Beam work SI no-289

2.5 cm thick D.P.C. with 1:2 in cement & coarse sand I/c over all Si no-361

Painting on D.P.C.with two coat of air blown bitumen one kg/sqm i/c coat of fuel wood other material, labour T&Petc.SI no-362

M-150 Brick work (1:4) cement and coarse sand mortar S/S completion of work as per S.I. No. 305

M-150 Brick work (1:4) cement f. sand mortar S/S completion of work as per S.I. No. 305+309+310

M.S. item work such as R.C.C. Completion of work as per S.I. No. 504

12 mm thick cement plaster (1:4) cement ,coarse sand mortar i/c all comp. of work as per

12 mm thick plaster (1:4) Cement & C sand mortar in outer side I/C all Completion as per

12 mm thick plaster (1:3) Cement & sand mortar in Cielling I/C all Completion as per S.I. No.

Engraving lines in plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the Engineer-in-charge i/c suplly of all materials, labour, Tools & plants etc.SI no-598

Floor Tiles: Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry@ 3.3 kg/ sqm including grouting the joints with white cement & matching pigments etc. complete. Size of Tile 600x 600 mm

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Wall Tiles: Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

S/F P.V.C. pipe of 10cm Dia water rain pipe I/C all material, labour T & P. etc.Si no-730a

Supply and Fixing box type fan hook (L.S.)

P/ Laying ( Brick coba ) 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20mm thick base of cement mortar 1:4 cement & coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar i/c all comp. of work.Si no-547 (N.Item-3)

Providing wall putty on new surface with approvel quqlity material of berger/Birla or similar make 2 coates.

Distempering one coat with Oil Bound distemper of approved brand and manufacture and required shade on undecorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and manufecture such as of British," Shalimar asian paint after throughly brushing the surface free from mortar dropping and other foreign matter and alsoo including preparing the surface even and sand prepared smooth including cost of all materials.S.O.R- 649

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) S.O.R Lucknow-13.47.1

Door Frame: Providing and fixing factory made uPVC door frame made of Upvc extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge 9.117.2 - Extruded section profile size 42x50 mm

Upvc Windows: Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. 9.147.A4.2 Using R3 series with frame (98mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m).

Door Closer: Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.Additionally,Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. 21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar

Providing and fixing in position collapsible steel shutters with vertical channels 20x1.0 with top and bottom rail of T-iron 40x40x6 mm, with 38 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

Supply and fixing flush door commercail quality conforming to IS :2202 Part I (1983) including fixing of wooden cleats and stoppers and including adustment of hings bolts locks handles springs fitting with necessary screws to be supplid. 35mm thick

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.2.8.1 All kinds of soil

Concrete with 4 Cm gauge Stone ballast Coarse sand of 2.20 FM and cement in proportion of (1:4:8) in foundation and under floors including supply of all materials As per si no 281

PCC Work: Concrete with 2 Cm gauge Stone ballast Coarse sand of 2.20 FM and cement in proportion of (1:2:4) in foundation and under floors including supply of all materials As per

Brick Work: M-150 class Brick work with (1:4) in cement and Coarse sand mortor.

Plaster on Wall: 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

R.C.C. (1:1.5:3) with cement ,approved coarse sand &2 cm gauge stone girt for slab SI no-284 (A)

Steel Reinforment Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing M.S. Foot rest including, straightening, cutting bending binding and placing in position complete.

Providing and fixing C.I. tee at the inlet and outlet of septic tank.

Providing & fixing 75mm dia vent pipes.

Providing & fixing 75mm dia cast iron terminal guard.

M.D.-10 Circular shape 500mm internal diameter.

M.D.-2.5 Circular shape 450mm internal diameter.

Making Soak pit 2.5 m diameter 3.0 metre deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100mm diameter. 1.8m long complete as per standard design.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/sub-main wiring along with earth wire with the following size of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2X1.5 sqmm + 1x1.5 sqmm earth wire

2X2.5 sqmm + 1x 2.5 sqmm earth wire

Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required:

Supply and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

1 or 2 module(75mm X 75 mm )

Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 modular switch, connection etc. as required.

Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connection etc. as required.

Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/woodedn block including connectionetc. as required.

Supplying and fixing brass batten/angle holder including connectionetc. as required.

Instalation,testing & commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLSCFL/LED lamps per fitting, complete with all accessories including connection etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. Including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required.

upto 450 mm sweep.

Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes.

Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, `C` curve including connections, painting etc. as required.

Supplying and fixing following way, Horizontal type three pole and neutral MCB distribution board, 415 volts on surface / recessed complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. ar required (but without MCB / RCCB / isolators).

Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as required.

Supply and fixing following rateing four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required.

Supplying and fixing cable end box (loose Wire Box) suitable for following triple pole and neutral , sheet steel, MCB distribution board, 415 Volts, on surface/recess, complete with testing and commissioning etc. as required.

For 4 way, Double Door TPN MCB DB

Supply and installing of following size of perforated pre-painted M.S. CABLE TRAYS with perforation not more than 17.5% in convenient sections, jointed with connections, suspended from the ceilling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.

300mm width x 50mm depth x 1.6 mm thickness

a) 32mm dia

Earthing with GI earth pipe, 600mm x 600mm x 6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/cock and salt as required.

Earthing with Copper earth pipe, 600mm x 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/cock and salt as required.

Supplying and Laying of 25mm x 3mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing & fixing 25mm x 5mm Copper strip on surface or in recess for connection etc. as required.

Supplying and Laying of 6 SWG GI wire at 0.50 metre below ground level for conductor earth electrode, including connection / terminating with G.I. thimble etc. as required.

EM-L. T. PANEL

Supply of 12 W Led BULB complete in all respect. Make-Philips or Eq

Supply of LED Tube Light with battern suitable for up to 1x20 watt LED tube light complete including tube etc. on surface / Pendent complete in all respect. Make-Philips or Eq.

W.C. pan with ISI marked white plastic seat and lid

Semi rigid pipe

a) 32mm dia

b) 40mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

(internal work)

32mm dia nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

internal work -Exposed on wall

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.

15mm dia nominal outer dia pipes

25mm dia nominal outer dia pipes

15mm nominal bore

15mm nominal bore

15mm nominal bore

Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931

Providing & fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing gun metal gate valve with wheel of approved quality.

25mm dia nominal bore

32mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,

Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.

Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.

150mm diameter

Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.