REPAIRS TO SUNKEN FLOOR, ROOFS, JOINERY, SANITARY FITTINGS, PLASTERING, INTERNAL WATER SUPPLY AND OTHER MISC WORKS AT EME WKSP, STN HQ, MES STAFF QTRS AREA UNDER AGE B/R-II AT GE(N) AHMEDNAGAR

Amount

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc. complete all as specified and directed

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15 cm thickness below or above ground level complete all as specified.

Taking down cement plaster of any thickness on brick/stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as directed

Taking down chowkats or frames not exc 1.50sqm with shutters (without taking off shutters from the frames) all as directed.

Taking down chowkats or frames exc 1.50sqm not exc 4.00sqm with shutters (without taking off shutters from the frames) all as directed.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each all as directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded aggregate as in sub base of floor 75mm thick, complete all as specified and directed

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in, Set in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid ceramic coloured tiles as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) size of tiles 400x400 mm, as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed.

M&L for coloured glazed ceramic tiles digitally printed premium designer series of size of tiles 350x450 mm, 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for machine cut Kota stone slab 20 to 25mm thick (minimum size 30cm x 45cm) as in flooring, laid over and incl cement screed bed 15mm thick in cement mortar 1:6, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing complete all as specified

M&L for rough dressed shahabad stone, 30 mm thick laid over and including 15 mm thick screed bed in cement mortar 1:6, laid and jointed pointed in cement mortar 1:3 all as directed.

M&L for Vitrified Ceramic tiles 10 mm thick dark colour (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. Over and including 15 mm thick screed bed in cement morter 1:6, complete all as specified and directed

All as per Sl item No 15 (here-in-before) but on skirting / Dado.

M&L for 16 to 18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in cement and sand mortar (1:6) jointing & pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polishing to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge

M&L for machine cut cudappah stone slab 20-25 mm thick over cement screed base, full round moulding the edge, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.complete all as specified and directed

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, all as directed.

Supply and fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as directed.

Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frames chowkat of size 45x85mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum and screw withdrawal strength of 2200 N (face) ( 1100 N (Edge), minimum compressive strength 58 N /mm², modulus of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire resistant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (face) ( 900 N (Edge), minimum compressive strength 50 N /mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire resistant and fixing with stainless steel butt hinges in position with MS hold fast/lugs/SS dash fasteners all as per Engineer-in-charge

Supply and fixing 2nd class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, all as specified and directed

Supply and fixing powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Supply and fix power coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm.

Supply and fix mild steel pressed handles oval type stove enamelled black of size 150mm.

Supply and fix 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as directed.

Supply and fix aluminium anodised barrel tower bolt of extruded section 150mm long.

Supply and fix mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate all as directed.

Supply and fix 20mm dia powder coated chromium plated curtain rods including brackets etc all as directed.

Supply and fixing galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 118 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

All as per item No. 34 above but fixed in repairs for wooden door/window. all as specified and directed

Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

M&L for frosted glass 5mm thick glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fixing 3.00 mm thick ordinary quality plain sheet glass with oil putty in squares n exc 0.50 Sq m in each pane complete all as specified and as directed.

M&L for frosted glass 3mm thick glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces all as directed.

M&L for preparation of new steel/steel ornamental and iron surfaces of any description exceeding 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified.

M&L for preparation of old wood and wooden based surfaces of any description exceeding 10cm in width or girth and applying one coat of synthetic enameled paint all as specified and directed

M&L for preparing old plastered surfaces and applying one coat of OBD (washable) at any height complete all as specified & directed by Engineer-in-charge.

M&L for preparing old plastered surfaces complete and applying two coat of Cement Base Paint at any height complete all as specified & directed by Engineer-in-charge.

M&L for preparing old plastered complete and applying one coat of Apex exterior coat Paint at any height complete all as specified & directed by Engineer-in-charge.

Cutting chases in brick work, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10cm but n exc 20 cm girth, all as specified and directed

Taking up or down steel tubing for 15mm dia bore etc all as specified and directed

All as per item No 47 above but, 20 mm dia bore etc.

Supply and fixing 15 mm bore 3 Layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors. all as specified and directed

All as per item No 49 above but, 20 mm dia bore etc.

Supply and fix in repairs bib tap, 15 mm dia, CP cast copper alloy fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed.

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore, all as specified and directed

Supply and fix in repairs 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 600 mm all as directed.

Supply and fix repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, all accesories all as directed.

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren complete all as specified and directed.

Supply and fixed in repairs 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls complete all as directed.

All as per item No 57 above but 75 mm dia.

Supply and fix in repairs 110 mm bore PVC (SWR) bend, any radius all as directed.

All as per item No 59 above but 75 mm bore.

Supply and fix in repairs 110 mm bore PVC (SWR) branch piece single (single Y) equal or unequal all as directed.

All as per item No 61 above but 75 mm bore.

Supply and fix in repairs 110 mm bore PVC (SWR) branch piece double (double Y) equal or unequal all as directed.

All as per item No 63 above but 75 mm bore.

Supply and fix repairs PVC (SWR) floor trap, 75 mm dia with grating including jointing with slovent cement etc all as directed.

Supply and fixed in repairs 32 mm dia PVC flush pipe for low level flushing cistern and conecting to pedestal pan including jointing complete all as directed.

Supply and fix in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting all as directed.

All as per item No 67 above but water storage tank of capacity 1000 litres.

All as per item No 67 above but water storage tank of capacity 2000 litres.

Supply and fix in repairs wash hand basin vitreous China white, flat back or angle type of size 550 X 400 mm, waste chain and plug and porcelain stopper, waste pipe, a pair of brackets, or errecting stand all as specified and directed.

Supply and fix in repairs stainless steel kitchen sink matt finish with draining over all size 950 X 510 mm and bowl size 410 X 410 X 230 mm, made out of 1.00 mm thick SS sheet of high quality including a pait of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack made out of 0.63 mm thick stainless steel sheet of size 36''x 36''x 10'' with complete accessories including screws etc complete all as specified and directed by Engineer-in-Charge .

M & L for providing water proofing treatment on roofs, as per manufacturere's instructions and as specified after taking down/out as existing out at site etc complete all as specified and directed by Engineer-in-Charge (a) Cleaning the newly plasterd surfaces with wire brushes and applying a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface. (b) Applying and laying torch APP polymer modified bituminous membrane 3mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by therofusion process as per manufacturers specification including applying one coat of aluminium paint.

M&L for plastering 10 mm in cement and sand mortar (1:3) using 100 % course sand on roof mixed with and including WPC @ 3% by weight of cement and finished the surface even and smooth without using extra cement.

Supply and fix in repairs looking mirror of size 600 mm X450 mm all as directed.

Supply and fix in repairs, shower rose with shower arm all as specified and directed.

Supply and fix in repairs plastic water closet seat cover, colored closed patern with flat bottom. cover and mild steel cromium plated or alumlised hinging device etc all as specified.

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets all as directed.

Supply and fix in repairs framed work such as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other coverings, doors etc to be prepared for handing or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F of rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 (Gde-E- 250) quality-A

M&L for rendering 10 mm thick in cement mortar 1:4 on stone masonry surface finished even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 15 mm thick in CM 1:6 on brick or concrete surface and finishing even and smooth without using extra cement, all as specified and directed

M&L in repairs for false ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metallized polyster foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturere's instructions / specification and all as directed.

-ditto- all as per item No 83 (here-in-before) but except supporting sections snap grid -ditto- all as specified and directed by Engr-in-charge.

Dismantling of PGI /translucent sheets of any guage or any thickness. all as specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, coloure and design as approved by GE

M&L for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, coloure and design as approved by GE

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished rainforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC viterous china squatting pan 580x440mm with integral footrests/pedastal pan incl seat cover, white, area of WC exc 1.50 Sqm but nexc 5.00 sqm etc after dismantling the existing sunken floor etc complete all as specified and as directed Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap all as directed.

M&L for stone sett flooring with stone setts of size 200 to 250mm long 150 to 200mm wide and 150mm deep and sides dresses bedded in cement and sand mortar (1:3 ) joints 20mm thick grouted in cement and sand mortar (1:2) with admixture of matalic floor 5% by weight of cement struck flush etc complete all as specfied and directed by Enigneer-in-Charge.

M&L for edge stones to flooring with stone setts of size 250 to 300mm long 150 to 200mm wide and 450mm deep etc complete all as specified and directed by Engineer-in-Charge.

Dismantling fencing wire mesh, any type, all as specified and directed.

M&L for Precast RCC Column & Plate M-20 grade (Column-150x150mm with 4 nos Main bars of 6mm dia) and Plate 1800x300x75mm with 4 nos of wire of 4 mm dia) including fitting, distance between two coloums n exc 1.80 mtr and additonal column required for each corner etc complete excn for column and PCC 1:3:6 around Column base all as specified and directed.

Avinash B Kullal

M/s AG PATHAN

M/S. YADAV ENTERPRISES

Neha Enterprises

OM SAI ASSOCIATES

MATOSHREE CONSTRUCTION

Arihant Construction

Priyadeep Construction

M/s Meher Construction

M/s Mauli Construction