8936/NIT 24/21-22 CERTAIN REPAIR/MAINTENANCE OF INTERNAL ELECTRIC POINT WIRING, SUB MAIN WIRING, DBs AND EARTHING IN ZONE A OTM ACCN UNDER GE NORTH BATHINDA AT BATHINDA MIL STN

Amount

SCHEDULE 'A' E/M Works

Taking down carefully/aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc and making good distrubed surfaces of wall and floors etc to match with the existing all as specified and directed by Engineer-in-charge.

M&L for point wiring complete with 1.5 sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor FRLSH cable (ISI marked) in existing concealed/ surface conduit for one light point /fan point controlled by one switch including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth and connecting to earth dolly and existing MS Sunken box and incl 3 mm thick laminated sheet ( Make - Hylem/Anchor) ISI Marked top cover including frame for covering the switches /sockets/regiulators etc complete all as specified and directed.Make of cable :- Havellls/Polycab/Dcab/Phenolex

All as per item No 2 here in before but for socket outlet 5 pin 5 Amp on same board complete all as specified & directed.

All as per item No 2 here in before but for socket outlet 5 pin 5 Amp on independent board but not below the switch board complete all as specified & directed.

All as per item No 2 here in before but for socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed.

All As per item No 2 in before but for bell/buzzer point complete all as specified and directed.

All As per item No 2 in before but for one light point controlled by Two Two way switch all as specified and directed.

Taking down carefully copper/aluminium point wiring (light/fan/socket or power point) complete fitting such as hylem sheet switches,ceiling rose , pendent holder, sockets,regulators including rusted/broken concealed/surface conduit and sunken boxes etc and making good disturbed surfaces of wall and floor etc to match with the existing all as specified and directed by Engineer-in-charge.

M & L for concealed point wiring complete with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken boxe of suitable size (min 60mm deep, suitable length and 1.2mm thick ), 3mm thick bakelite plastic laminated sheet for mounting with frame and top cover for switches and socket ,fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge. Make of cable and co duit :- Havellls/Polycab/Dcab/Phenolex/Anchor

All as per item No 9 here in before but for socket outlet 5 pin 5 Amp on same board complete all as specified and directed.

All as per item No 9 here in before but for socket outlet 5 pin 5 Amp on independent board but not below the switch board complete all as specified and directed.

All as per item No 9 here in before but for socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light/fan/socket or power point) complete fitting such as hylem sheet switches,ceiling rose , pendent holder, sockets,regulators including rusted/broken concealed conduit and sunken boxes etc and making good disturbed surfaces of wall and floor etc to match with the existing all as specified and directed by Engineer-in-charge.

M & L for surface point wiring complete with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulate unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC casing caping (heavy duty ) suitable size as directed with all fittings and all accessories but including 3mm thick bakelite plastic laminated sheet (fixed with brass screws & cup washers ) for mounting of switches and socket fan regulator, for light/fan/bell point ,controlled by one switch including provn of 1.5 sqmm FRLSH PVCinsulated multi strand copper conductor wire continuoues as earth wire connected to earth dolly etc complete all as specified and as directed by Engineer-in-charge. Make of cable and conduit :- Havellls/Polycab/Dcab/Phenolex/Anchor

All as per item no 14 above but for 3 pin 5 Amps socket outlet point on same board.

All as per item No 14 above but for 3 pin 5 amps socket outlet point on the independent board.

All as per item No 14 above but for socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed.

S & F 6 Amps Switch 250 volts AC one way ISI marked with suitable frame and covers. Make:-Anchor/Havells/Legrand/Indoasian.

S & F 6 Amps Socket 5 pin shuttered 250 volts AC ISI marked with suitable frame and covers . Make:-Anchor/Havells/Legrand/Indoasian.

S & F Switch 16 Amps 250 volts AC ISI marked with suitable frame and covers . Make:-Anchor/Havells/Legrand/Indoasian.

S & F Socket universal 6/16 Amps 250 volts AC shuttered ISImarked with suitable frame and covers. Make:-Anchor/Havells/Legrand/Indoasian.

S & F 6 Amps Switch 250 volts AC two way ISI marked with suitable frame and covers. Make:-Anchor/Havells/Legrand/Indoasian.

S & F modular Switch 6 Amps 250 volts AC one way ISI model fantasy with suitable frame and covers with matching colours . Make:-Anchor/Havells/Legrand/Indoasian.

S & F modular Socket 6 Amps 5 pin shuttered 250 volts AC model fantasy with suitable frame and covers with matching colours . Make:-Anchor/Havells/Legrand/Indoasian.

S & F Switch 16 Amps modular 250 volts AC ISI model fantasy with suitable frame and covers with matching colours . Make:-Anchor/Havells/Legrand/Indoasian.

S & F modular Socket universal 6/16 Amps 250 volts AC shuttered ISI model fantasy with suitable frame and covers with matching colours. Make:-Anchor/Havells/Legrand/Indoasian.

S & F modular Switch 6 Amps 250 volts AC two way ISI model fantasy with suitable frame and covers witch matching colours. Make:-Anchor/Havells/Legrand/Indoasian.

S & F Bell Push 6 Amp 250 volts AC ISI model fantasy.

S&F Fan regulator Electronic step type (1-4), socket type 230- 240 volt AC supply with frame complete all as specified incl taking down old unservice able regulator complete all as specified. Make:-Anchor/Havells/Legrand/Indoasian.

S & F ceiling rose 3 plate flush type 6 Amp 250V AC topline series with polycarbonate 20 X 50 mm two to three terminal complete all as specified.

S & F Batten holder 2 Amp 250V AC with skrit ISI marked top line series , polycarbonate cased body of brass with back plate suitable for batten fittings complete including 9w LED bulb all as specified. Make of holder : Anchor/Havells/Legrand/Indoasian/SSK and Make of LED bulb :- Crompton/Philips/Bajaj/Polycab/Havells

S & F Electric / Electronic Bell, ding dong type 230 Volt AC supply complete all as specified. Make : Anchor/SSK /Havells/Legrand.

Supply and fixing wall mounted Retro LED 20 watt, Batten decorative type, appx 4 feet long, pre wired including LED tube light 20W, 6000K with inbuilt driver complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge. Make - Crompton/Havells/Wipro/Philips

Supply and fixing LED mirror light fiting 7/ 9 watt, 6000K, lineer & compact with decorative grey end caps, polycarbonate body and ribbrd opal diffuser complete fitting with lamp and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge. Make - Crompton/Havells/Wipro/Philips

Supply and fixing surface mounted, decorative round plastic bulk head LED luminaire comprising of high brightness LED's, IP54 protection, 10 watt , 6000K complete fitting with LED lamp, driver and all other fixing accessories including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge. Make - Crompton/Havells/Wipro/Philips

Supply and fixing wall mounted/surface mounted decorative wall light fixture in cylindrical/Doom profile made up of polycarbonate for and including LED 7 Watt lamp, base B22, complete fitting with LED lamp and all other fixing accessories including electric connection connecting with using flexible copper wire twin core including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge. Make - Crompton/Havells/Wipro/Philips

Supply and fixing recessed LED ceiling lite with wide light window for maximized glare free output suitable for 600x600mm and ceiling cutout 595x595mm modular grid/POP ceiling complete fitting with separate electronic driver and high brightness SMD LEDs 36 watt, 6000K and one nos extra LED driver along the fittings including connecting electric connection, including taking down unserviceable old fitting any type complete all as specified and directed by Engineer-in-Charge. Make - Crompton/Havells/Wipro/Philips

Supply and fixing energy saving IP 65 flood light luminaire with high power COB LED light fitting 70 watt LED, 5000K complete fitting with LED and all other accessories and fitting arrangements including connecting electric connection, including taking down unserviceable old fitting any type complete all as specified and directed by Engineer-in-Charge. Make : Crompton/Havells/Wipro/Philips

Supply and fixing Sleek Pressure die cast aluminium housing, heat resistant glass, energy saving, IP65 protection, better optics for uniform distribution street/Roadway luminaire with high power LED 35 watt complete fitting with driver, LED strip and all other accessories etc, suitable for direct mounting on pipe bracket, fixing on wall with and including brackets made out of GI tubing lightwith suitable bent to shape at 120 degree angle at half metre from bottom (as per sample), fixing with MS clamp (02 Nos) and nut bolts, including before fixing applying two coats of aluminium paint on bracket and clamp over a coat of red oxide primer, including making electric connection with using twin core copper cable of suitable size including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-charge. Make - Crompton/Havells/Wiprp/Philips

Supply and fixing in replacement wall mounted study lamp bi-directional type prewired with lamp holder B22 based suitgable for and including LED candle lamp 3 watt and making electrical connections including taking down old unserviceable light fittings any type complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement LED Post top lantern 20 watt, IP65, with cast aluminium spigot housing, with decorative clear opal acrylic diffuser, complete fitting with all accessories and LED lamp, fixing on existing GI pipe system including all electric connections, including taking down old unserviceable fitting any type complete all as specified and as directed by Engineer-in-charge. Make :-Crompton/Havells/Wipro/Philips

Supply and fixing in replacement of 3mm thick phenolic sheet 4 inch x 4 inch including suitable machine screws including taking down old unserviceable sheet complete all as specified and as directed by Engineer-in-Charge. Make - Anchor/Hylem

Supply and fixing in replacement of 3mm thick phenolic sheet 7 inch x 4 inch including suitable machine screws including taking down old unserviceable sheet complete all as specified and as directed by Engineer-in-Charge. Make - Anchor/Hylem

Supply and fixing in replacement of 3mm thick phenolic sheet 8 inch x 10 inch including suitable machine screws including taking down old unserviceable sheet complete all as specified and as directed by Engineer-in-Charge. Make - Anchor/Hylem

Supply and fixing in replacement of 3mm thick phenolic sheet 10 inch x 12 inch including suitable machine screws including taking down old unserviceable sheet complete all as specified and as directed by Engineer-in-Charge. Make - Anchor/Hylem

Supply and fixing in replacement switch piano flush type, 5/6Amps, 250 volts, single pole, one way fixed on existing sheet complete all as specified and as directed by Engineer-in-charge. Make : Anchor/SSK and equivalent

Supply and fixing in replacement Socket outlet multipurpose. 2 in 1, 5 pin 5/6 Amp, 250 volts flush type fixed on existing sheet complete all as specified and as directed by Engineer-in-charge. Make : Anchor/SSK and equivalent

Supply and fixing in replacement Socket outlet multipurpose. 2 in 1, 5 pin 15/16 Amp, 250 volts flush type fixed on existing sheet complete all as specified and as directed by Engineer-in-charge. Make : Anchor/SSK and equivalent.

Supply and fixing in replacement Batton holder 2 Amp 250 V AC skrit ISI marked top line series, polycarbonate cased body of brass with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-charge . Make : Anchor/SSK and equivalent

Supply and fixing in replacement switch piano flush type, 15/16Amps, 250 volts, single pole, one way fixed on existing sheet complete all as specified and as directed by Engineer-in-charge. Make : Anchor/SSK and equivalent

Supply and fixing in replacement switch Modular flush type, 25 Amps, 250 volts, single pole, one way fixed on existing mdoular sheet complete all as specified and as directed by Engineer-in-charge. Make : Legrand and equivalent

Supply and fixing in replacement modular Socket outlet 3 pin 25 Amp, 250 volts flush type fixed on existing modular sheet complete all as specified and as directed by Engineer-in-charge. Make : Legrand and equivalent.

M&L Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 sqmm in existing PVC concealed conduit incl taking down old unserviceable submain wiring complete all as specified. Make : Anchor/Polycab/Havells

M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, multi -stranded copper conductor cable FRLSH with continuous copper earth conductor of 6 sqmm in existing PVC concealed conduit incl taking down old unserviceable submain wiring complete all as specified. Make : Anchor/havells/Polycab.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 sqmm in & including PVC conduit size 20mm incl taking down old unserviceable submain wiring complete all as specified. Make : Anchor/Havells/Polycab.

M & L for submain wiring complete with two single core 6 sqmm 1100 volts grade, PVC insulated multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 6 Sqmm in & including PVC conduit size 20 mm incl taking down old unserviceable submain wiring complete all as specified. Make : Anchor/Havells/Polycab/Phinolex.

Material and labour for PVC conduit 25mm dia (non metallic, heavy duty), fixing on wall surface including all fitting arrangement i.e. PVC clamp, rawl plug, pipe hook, screw, terminal box, junction box, tee, bend, PVC round plate, bell mouth tube ends, couplers etc. including making good disturbed surfaces of walls as per existing after that existing LAN wires and telephone wires any size disconnecting the existing connection and drawing through conduit and re-connection with existing instruments as per original complete all as specified and as directed by Engineer-in-charge.

Material and labour for casing caping of size 32mm (medium grade), fixing on wall/ceiling surface including all fitting arrangement i.e. PVC clamp, rawl plug, screw etc. including making good disturbed surfaces of walls as per existing after that existing LAN wires and telephone wires any size disconnecting the existing connection and drawing through casing caping and re-connection with existing instruments as per original complete all as specified and as directed by Engineer-in-charge.

Supply and fixing LED 3 watt spot light round in profile of warm white 3000K min with inbuilt driver to be fixed in to existing POP ceiling complete as per sample all as specified and as directed. Make :As per sample.

Material and labour Electronic driver suitable for Led ceiling lite of 36 watt of size 2' x 2' complete. Make : cat part No : LED DRIVER 36V36WS of Havells/SODRVI-27-1100-36W of Crompton and equivalent.

S & F sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated DB SPN 12 way 230 V AC with 200 Amp rated bus bar, Double Door,12 modules, dust and vermin proof suitable for incorporation of MCB's and isolators etc incl taking down old unserviceable MCB DB's complete all as specified.

Supply and fixing in replacement (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement (concealed in wall or as directed) factory made DB (made out of CRCA sheet) TPN, 4 Way 433 V (8+12 modules), double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.

S&F Sheet metal enclousers made out of CRCA mild steel sheet, double door, powder coated DB VTPN 4 way 415 Volt, dust and vermin proof suitable for incorporation of MCCB's upto 125Amp and isolators etc complete including taking down old unserviceable DB all as specified and directed

S & F MCB SP suitable for 230 volts AC supply 5 to 32 Amps, SP rupturing capacity not less than 10KA, C Curve ISI Marked, 1 Module incl taking down old unserviceable MCB SP complete all as specified directed.

S & F MCB SPN 40- 63 Amps, 10 KA 'C' curve 230 V AC, 50 Hz including necessary attachment incl taking down old unserviceable MCB SPN complete all as specified and directed by Engineer-in-Charge.

S & F MCB SPN 32 Amps, 10 KA 'C' curve 230 V AC, 50 Hz including necessary attachment incl taking down old unserviceable MCB SPN complete all as specified and directed by Engineer-in-Charge.

S & F MCB TPN 63 Amps 415 Volt AC, C curve, 4 module capacity not less than 10 KA incl taking down old unserviceable MCB TPN complete all as specified.

Supply and fixing MCCB of capacity 100 Amp, FP, 415 volt, short circuit breaking capacity not less than 25KA , thermal magnetic trip, setting 80-100%, Icu-100% Ics confirming to IEC-947, IS-13947, including thimbles, nuts, bolts, washers etc , MCCB fixing in new DB or the existing DB/Panel including making incoming, outgoing connections complete all as specified and as directed by Engineer-in-charge . Note :- DB shall be measured and paid separately under appropriate item of BOQ.

Supply and fixing (Concealed with wall) single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 volts, AC supply including taking down old unserviceable enclosure complete all as specified and directed by Engineer-in-Charge.

M & L Retro LED 20 watt tube only appx 4 ' long 6000k min 100 lumens per watt with inbuilt driver to be fixed in to existing batten in replacement of tube 34/40 watt incl taking down of existing tube rod complete all as specified and as directed. Make : Cat pt No : BLRB 18W of Bajaj/LT-8-20-865-2 of Crompton/Cat pt No :PHOTONULTRA 1213T8SSTL18W LED865 PC of Havells.

Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate i.e. 7.5m min) by means of GI bolts/nuts/washers and including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, RCC cover and (including steel for cover) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in earthing pit including necessary form work, excavation & earth work, all as specified & shown in electrical plate No. 3 of SSR (Part – I) including taking out/dismantling old unserviceable earthing system complete all as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner.

Supply and fixing recessed mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver,with led 15 watt,6000K incl connecting electric connection incl taking down unserviceable old fitting any type complete all as specified and directed by Engineer-in-charge. Make : ENDURANEODLR 15W LED 830S of Make : Havells/LCDN-15-CDL/TL/WW of Crompton /BZSLO 15W WH of BAJAJ

Supply and fixing led ceiling lite with wide light window for maximize glare free output led 1x4 slim panel complete fitting with separate electronic driver and high brightness led 36watt, 6000k incl connecting electric connection and incl taking down unserviceable old fitting any type complete. Make : Cat pt No : LCPL-36-CDL (1x4) of Crompton/PLUTONEO 4X1 PLR36W LED840S of Havells /BZRSLL36WGZICW of BAJAJ.

Supply and fixing surface mounted pressure die-cast aluminium luminaire in powder coated white finish in square surface mounted LED flate panel with replaceable electronic driver,with led 18 watt,6000K incl connecting electric connection incl taking down unserviceable old fitting any type complete all as specified and directed by Engineer-in-charge. Make COMET LHEAAWP7IL1 W018 of Make : Havells/LCDSPLN-S-18-CDL of Crompton

Supply and fixing recessed mounted pressure die-cast aluminium luminaire in powder coated white finish in square panel with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver,with led 18 watt,6000K incl connecting electric connection incl taking down unserviceable old fitting any type complete all as specified and directed by Engineer-in-charge. Make :OCTANE Cat pt No : LHEBHEP71Z1W018 of Make : Havells/LSCSM-18W-CDL/NW/WW of Crompton /BPSLR 18W NW SQ of BAJAJ

Supply and fixing recessed mounted pressure die-cast aluminium luminaire in powder coated white finish in square panel with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver,with led 12 watt,6000K incl connecting electric connection incl taking down unserviceable old fitting any type complete all as specified and directed by Engineer-in-charge. Make :OCTANE Cat pt No : LHEBHEP71Z1W012 of Make : Havells/LSCSM-12W-CDL/NW/WW of Crompton /BPSLR 12W NW SQ of BAJAJ

Supply and fixing recessed mounted pressure die-cast aluminium luminaire in powder coated white finish in square panel with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver,with led 6 watt,6000K incl connecting electric connection incl taking down unserviceable old fitting any type complete all as specified and directed by Engineer-in-charge. Make :OCTANE Cat pt No : LHEBHEP71Z1W006 of Make : Havells/LSCSM-6W-CDL/NW/WW of Crompton

Supply and fixing LED PLL 15/18 watt 4 pin cool day type, in existing light fitting in any position and type incl minor repair/loose connection, side bipin holder and taking out old any type lamp complete. Make : Cat pt No : LPLL-18-CDL of CROMPTON/PROBLL 15W LED 2G11 of Bajaj/PHOTONULTRAPLL419TL18WLED865SPC of Havells

Supply and fixing sleek surface LED 6 watt round down light with Al die cast body, fjnish with drop downPC diffuser to deliever low glare i.e warm white with colour temperature 3000K complete as per sample with IP 65/66.

Supply and fixing LED strip of 22 watt wide viewing angle for good light distribution, easy to install including led strip driver complete.

Supply, installation, testing & commisioning of wall mounted indoor LT panel board protection class IP65, 415-433V made out of 2.0 mm thick RAL 7032/7035 coated CRCA steel, dust and vermin proof, double door complete prewired, with locking arrangements and hanging bracket suitable for fixing on wall, including painting with powder coated paint over a coat of redoxide zinc crome primer complete incl necessary internal wiring and suitable size following electric safety equipments inserted in this panel comprising of the following:- (a) Way for Incomer 160 A 4 pole MCCB -01 No (b) Way for outgoing MCCB 125 A 4 pole -01 No (c) Way for outgoing MCCB 63 A 4 pole -02 Nos (d) way for 63 A MCB C Curve-04 No (e) way for MCB 40 Amps -02 Nos (f) R Y B phase Indicating lamps - 01 Set (set of three) (g ) insulated Copper Busbars 200A rating - 04 Nos (h) Provision of digital Voltmeter suitable for 0-500 Volts AC

Supply only MCCB four pole 160 A 415V (fixing arrangements rate included in item No 82 above).

Supply only MCCB four pole 125 A 415V (fixing arrangements rate included in item No 82 above).

Supply only MCCB 63 A 4 pole 415V (fixing arrangements rate included in item No 82 above).

Supply only MCB SPN 63 0 A (fixing arrangements rate included in item No 82 above).

Supply only MCB SPN 40 A (fixing arrangements rate included in item No 82 above).

Supply and fixing in replacement of damaged Indiaction board for Sub division indicated in capital letters like "ASSISTANT GARRISON ENGINEER E/M -V, BATHINDA MILITARY STATION GE(N) BATHINDA" of size approx not less than 6mx1mx.70 m suitable carring capacity MS angless frame and covered with crylic sheet or quivalent material for the climatic condition of the station with inside indication LED lighting arrangement and its fittings and fixtures including making fixing arrangements tanding angles for suitable carrying capacity of the frame of the board on the top of the entrance pillar in front of the sub division and its connected fixing arrangement including cement works all as specified and directed by Engr-in- Charge.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular all as directed by Engr-in-Charge

Aman Enterprises

M/s DHEERAJ JAIN CONSTRUCTION COMPANY

NASIB ENGINEERS AND CONSTRUCTION

L H ENTERPRISES

M/s GURFATEH BUILDERS