ADDN/ALTN OF STREET LIGHT JUNCTION BOX POLE AND CONNECTED WORK AT AJAY BAUGH AREA AND SPECIAL REPAIRS TO PLUMBING, JOINERY AND GALVALUME SHEET ROOFING WORK TO BLDG NO P-440 MARRIED ACCOMMODATION AT 7TH LANE AJAY BAUGH UNDER GE MINNIE BAY, SRI VIJAYA

Taking up or down 20 mm bore tubing and connections and removing off the site all as specified and as directed.

Supply and laying of CPVC pipes 20 mm dia outer boreSDR 11 &plain CPVC SDR 11with all special fittings on walls /ceilings or laying in floors complete all as specified and as directed.

Supply and fixing 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and as directed.

Supply and fixing 20mm outer dia CPVC pipes brass Elbow complete all as specified and as directed.

Supply and fixing 20mm outer dia CPVC pipes brass Elbow (3/4 X1/2) complete all as specified and as directed.

Supply and fixing 20mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed.

Supply and fixing 20 mm outer dia CPVC Brass Tee complete all as specified and as directed.

S&F for 20mm bore CPVC Brass Union complete all as specified and as directed.

S&F in repair 25 mm cpvc ball valve / Gate valve screwed both ends for cpvc pipe complete all as specified and as directed..

S&F Ball brass valve high pressure of polyethylene float and fly nut complete screwed for iron pipe and fixed, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule etc and fixed of 25mm bore complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any gauge thickness or similar pattern roof coverings complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.

M & L for Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) of thickness 1.25 mm complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for, complete all as specified and as directed.

M&L Roof trusses (framed), trusssed, purlings, crane gantries, rails and fasternings and heavy breacket frasming(Beam,tee,angle,Channel, hollow sec or flat sections) including distance pieces, cleates etc. complete all as specified and as directed.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and as directed.

M & L for providing cement concrete type B1 (1:2:4) using 20 mm graded aggregate as in copings,apex stones,bed plates etc complete all as specified and as directed

Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling of ceiling boarding in description fixed in any position with nails complete all as specified and as directed.

S&F aluminium flat as wind tie fixed with 50mm/75mm aluminium self tapping screws complete all as specified and as directed.

S & F in repairs anodized aluminium grid work 605 x 605 mm with using 36.5mmx23.5mmx1.5mm thick main tee, 23.5 x23.5mmx1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L 4mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber/ GI / Aluminium framework with screws complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters and grill (if fixed) without taking off shutters from the frame) complete all as specified and as directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws incl in this item)

S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

M&L preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F Aluminium anodised sliding door bolts 300mm long with hasp and staple complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and as directed.

S & F butt hinges of stainless steel 150 mm long ISI marked fixed with brass screws complete all as specified and as directed.

S & F 100mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and as directed.

S&F for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed. NOTE:- All joint should be filled with sealant

S&F extruded aluminium alloy handle fabricated type anodised 100mm long complete all as specified and as directed.

S&F for contunoius (piano) hinges , mild steel , bright finish or electrogalvanished and width of flaps 30 mm (when open) etc., complete all as specified and as directed.

Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and as directed.

M & L for rendering 15mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Supply only Integral water proofing compound.

M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised earth wire 4mm connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6), type C1 chamber, MS funnel, wire gauge, 50mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling, removal of surplus soil to a distance n.exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of Schedule Part-I. Note : (i) Cost of GI earth strip and GI protection pipe upto 7.5mtr lengh shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for wire mesh, funnel, excavation, PCC cmaber pit, test point complete.

4 Core 16 Sqmm

3.5 Core 25 Sqmm

Supply & Laying in repair of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 40 mm and inner dia 32 mm polythylene including coupler & Bend with smoooth inernal and profiled external surface for non pressue under ground cable complete all as specified and as directed by Engineer-in-Charge Make : REX POLYEXTRUSION LTD or its equivalent as approved.

Excavation in trenches any type of soil (soft/loose/hard/dense) not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation, pipe, laying of cable etc not exc 10 Sqmtr on plan and not exc 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-Charge

Suppy and laying in trenches, fixed on walls, passing through pipes, jointing and testing of electric LT cables, PVC insulated, PVC sheathed, galvanised steel strip or wire armoured electric power cables with stranded aluminium conductors 1100 Volts grade complete all as specified and as directed by Engineer-in-Charge for the following size :- Note: Earth work/HDPE pipe/straight through joints if required will be measured and paid separately.The rates should be includs in Cable lugs, Cable Gland and necessary insulation taping.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil all as specified and as directed by Engineer-in -charge.

Removing excavated materials (soil) to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meters above the starting point all as specified and as directed by Engineer-in -charge.

Dismantling the existing unused old rusted / unserviceable steel / RCC poles of any type including all fitting fixture complete all as specified and as directed.

Dismantling old RCC / rusted poles including PCC and supply & erect minimum 7 mtr height above GL / foundation made out of Hot dip Galvanized single section octogonal pole with foundation base plate of size 250x250x16 mm, foundation bolts 04 Nos of size 24 x 700/750 mm,with signle type arm bracket 1500 mm long, the pole shaft shall be tapered with single longitudinal welding and door opening for cable with 01 No MCB SP 6 Amp and 32 Amp connector and 03 run of 1.5 sqmm PVC wire for connecting street light fitting from MB complete all as specified and as directed by Engineer-in -charge. Note : Earth work, cement concrete in foundation, coping etc will be measured and paid seperately under relevant item.

Supply & fix in repair hot dipped galvanised mild steel step pole of height 5 mtr with grey powder finish, compatible for all standard post top lights, plasma cut having bottom of 4 inch upto 1.5 mtr bottom and 3 inch to upper 3.5 mtr, fixed to the foundation with GI nuts and bolt including 3 core 1.5 Sqmm PVC wire for post lamp connection complete all as specified and as directed. Note : Earth work, foundation for pole, Post top light shall be measured and paid separately under relevant item.

Supply & errect minimum 7 mtr height above GL / foundation made out of hot dip galvanized single section octogonal pole with foundation base place of size 250 x 250 x 16mm, foundation bolts 04 Nos of size 24 x 700 / 750mm with single type arm bracket 1500mm long, the pole shaft shall be tapered with single longitudinal welding and door opening for cable with 01 No MCB SP 6 Amp and 32 Amp connector and 03 run of 1.5 Sqmm PVC wire for connecting street light fitting from MB including dismantling of old defective RCC / Steel tubular poles complete all as specified and as directed. Note : Earth work, cement concrete in foundation, coping etc will be measured and paid separately under relevant item.

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including dismantling existing rusted/ unserviceable cross arms complete all as specified and as directed.

M&L Reinforced cement concrete (design mix) Foundations M-20 Grade, including rafts, footings, foundation beams, plinth beams, bases for columns, etc,basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for TMT bars from but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for foundation work complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 with 40 mm graded aggregate as in foundation complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded broken stone aggregate) as in coping / collar of poles including necessary form work complete all as specified and as directed.

S&F in repair PVC copper cable insulated sheathed of size 1.5Sqmm x 3 core complete all as specified and as directed. Make :- Havells or equivalent

Supply and laying on wall / on pole of CPVC pipes outer diameter 20mm SDR 13.5 pipes & plai

n CPVC SDR 11 fittings including dismantling old one compelte all as specified and as directed.

Supply & fixing IP 65/66 thermoplastic-polycarbonate cable junction box of size 205X255X112mm with terminal which is totally shock proof, water proof, halogen free, silica and having internally embedded gasket technology fixing on pole / surface / frame with the help of Two nos of GI calmp of size 25X3 mm including 40Amps connector, lugs and equivalent MCB complete all as directed.

Supply & fixing IP 65/66 thermoplastic-polycarbonate cable junction box of size 130X180X77mm with terminal which is totally shock proof, water proof, halogen free, silica and having internally embedded gasket technology fixing on pole / surface / frame with the help of Two nos of GI calmp of size 25X3 mm including 40Amps connector, lugs and equivalent MCB complete all as directed.

S&F in replacement of LED street light Warm white fittings comprising of epoxy powder coated housing,enclosed with glass cover in frame,with lumen output not less than 10800 lumens suitable watt for efficiency not less than 120 lumens/watt,having secondary optics,min wattage 90 watt ,with ingress protection IP 65/66 and potted electronic driver of miniumum IP 67 with 3000k-4000K, THD less than 10 % ,CRI>80,P.F>0.9,IK>08 SPD of capacity 10 KV etc complete all as specified and as directed by Engineer in charge

S&F in replacement of LED street light warm white fittings comprising of epoxy powder coated housing,enclosed with glass cover in frame,with lumen output not less than 8400 lumens suitable watt for efficiency not less than 120 lumens/watt,having secondary optics,min wattage 70 watt ,with ingress protection IP 65/66 and potted electronic driver of miniumum IP 67 with 3000K-4000K THD less than 10 % ,CRI>80,P.F>0.9,IK>08 SPD of capacity 10 KV etc complete all as specified and as directed by Engineer in charge

Taking down old unserviceable flood light fittings any height and Supply & Fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame (with total lumen output not less than 24000 lumens and suitable wattage for efficiency not less than 120 lumens / Watt) min wattage 200 Watt with ingress protection IP 65/66 and SPD of capacity 10 KV etc including necessary clamps etc complete and testing on completion all as specified and as directed. Make :- Crompton / Phillips / C&S / Havells / Wipro / Henolix / Luker. Note : The GI pipe bracket if required will be measured and paid separately under relevant schedule items.

S&F in replacement energy efficient hanging type LED post top light fitting with decorative mild steel arm bracket IP 66/67 protection high quality integrated LEDs assuring soothing warm white light all night long 30W with THD less than 10%, CRI>80, P.F?0.9, IK?08, 3000K black case aluminium including decorative mild steel arm for hanging post top, all necessary wiring, clamps, nut and bolts mounting accessories etc and providing connection complete all as specified and as directed.

Supply and fix in repair GI bracket for street lights made out of medium grade GI pipe 40mm dia, not less than 1.2 mtr long bend to shape as directed, fixed on poles with two Nos GI clamp of size 40 x 6mm flat iron suitable for steel tubular pole including suitable GI nuts and bolts washers complete all as specified and as directed.

Supply and fix in repair GI clamp made out of 50 x 6mm flat iron of suitable size for steel tubular poles complete all as specified and as directed.

Supply and fix in repair Digital Timer with light sensor based Digital time switch, contractor pre wired distribution board complete time lite 63A, 3 pole 415V complete all as specified and as directed.