Electrical Works

Amount

Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End

Renewal by Supply and fixing of 4 feet LED 20W fitting with LED 20W tube (Higher end) complete with TW round blocks on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting.

Renewal by Supply and fixing of 20W, 4 feet Twin LED fitting on ceiling with conduit pipe suspension with PVC unsheathed copper leads from terminals to the fittings.

Renewal by Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Renewal by supply and fixing of 36W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Renewal by Supply and fixing of 1200mm(48'') sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator(Higher End) with 1 meter down rod on existing fan clamp.

Renewal by Supply and fixing of BH with 10W LED lamp with PVC unsheathed copper leads from terminals to the fitting

Renewal by supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall. (Make: Crompton)

Renewal by Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

Renewl by supply and fixing of 1nos 6A two model 5pin socket, 1no 6A one model switch on suitable module surface mounting box (Plastic) with module cover plate (plastic) on wall with connections Higher end

Renewal by Supply and fixing of 3 nos.6A two module socket , 1no 6/16A two module socket,3nos 6A one module switch 1no 16A one moudle swtich on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 3 nos.6A two module 3 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

Renewal by supply and fixing of 1 no.6A two module socket , 1 no. 6/16A two module socket , 1 no. 6A one module switch , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. (Make: Carb Tree / Equ)

Renwal by Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections.(Make: Carb Tree / Equ)

Renewal by supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug on wall with earth connection. (For AC Plug) (Make: Legrand (MDS) / Hager)

Renewal by Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5 sq.mm copper wire with painting of suitable colour

Renewal by supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour. (Make: Polycab / RR / KEI)

Renewal by Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour. (Make: Polycab / RR / KEI)

Renewal by Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 10 sq mm copper wire with painting of suitable colour.

Renewal by Supply and fixing of 2 Pole enclosure with 6A to 32A DP MCB on wall with earth connection.

Renewal by supply and fixing of 4 pole 63A MCB with suitable sheet steel enclosure on wall with suitable necessary connection. (Make: Hager / Legrand)

Renewal by Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End Higher End (Make: Hager / Legrand)

Renewal by Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way rovision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for comodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush wall with earth connection only.

Renewal by Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Renewal by supply and Fixing of 4 way 100A Vertical TPN Distribution Boards (with MCB Incomer); Double Door; IP42 with 1 No 100A 4 pole MCB as incoming and 1No 63A TP MCB, 9Nos 6-32A SP MCB with suitable angle iron frame work on wall with Earth connection only. The MCB DB and MCB's should be with ISI mark. (Higher End) (Make: Hager / Legrand)

Renewal by supply and fixing of UPVC cable management box of size 100mmx 50mm with necessary connection etc.,

Renewal by supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour. (Make: Polycab / RR / KEI)

Renewal by supply and clarnping of 3 1/2 x 25 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Renewal by supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection.

Renewal by supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Renewal by supply and clarnping of 3 1/2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Renewal by supply and fixing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection.

Renewal by supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Renwal by supply and fixing of 150W flood light fitting on wall with PVC unsheatehd copper leads from terminal to the fitting

The panel should be powder coat paint of approved colour approved by the site officer and also the danger board. The capacity of the switches size of incoming and outgoing cable the place to which the supply is fed should be mounted on switch chamber. The panel board should be mounted on 100mmx 50mmx MS channel provided all around the bottom of the panel. The whole arrangement should be erection of an an+D39gle iron frame pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 1.0 m from the ground level and with necessary earth connection

Renewal by supply and fixing of 120W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting

Renewal by Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Renewal by Supply and fixing of brass cable gland for 4 of 16 sq mm LTUG armoured cable with earth connection.

Renewal by Supply and clamping of 4 of 16 sq mm PVC LTUG armoured cable on post or on wall with MS clamps.

Renewal by Supply and fixing of 2.0TR 3star rated energy efficient high wall mounting Split type AC units, consisting of 1no outdoor condensing unit, complete with hermetically sealed compressor with R-22 non CFC Refrigerant and 1no 2.0TR capacity hi-wall mountable Evaporator, blower motor and connected accessories, control with maximum cooling guaranteed and minimum power consumption suitable for operate on 230V-50hz, 1ph AC power supply etc., Make: Carrier/Havells-Lloyd/Sharp/equ

Renewal by Supply and fixing of Wall mountable 5KVA automatic voltage stabilizer with 3 minutes time delay, high & low voltage cut off arrangement etc., Make: V-guard./equ.,

Renewal by Supply and fixing of angle iron stand suitable for Condensing unit,

Renewal by Supply and laying of 5/8” & 3/8” copper refrigerant pipe with 2.5sqmm-3 core power cord wire & etc.,

Earthing as per ISI specification with an earth electrode of 2.1m class 'B' GI pipe of dia. not less than 40mm, with copper earth plate of size 125mm X 50mm X 6mm with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

U.S. ELECTRICALS (BID ID -1527476)