Re-construction of boundary wall in National Law University and Judicial Academy, Amingaon, Guwahati

Amount

Demolishing brick work manually/ by mechanical means including stacking of servicable material and In cement mortar

Demolishing R.C.C work manually/by mecahnical means including stacking of steel bars and disposal of

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Providing,driving with hydraulic piling rigs with power units and installing driven cast-in-situ reinfored 400 mm dia piles

Dry brick pitching half brick thick in drains including supply of bricks and preparing the surfaces complete With common burnt clay F.P.S (non modular) bricks of class designation 7.5

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level: 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering and shuttering-All work upto plinth level: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforcement cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, flllets,columns, pillars,piers, abutments, posts and struts etc. above plinth level upto floor level, excluding cost of centering,shuttering,finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting , propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Lintels, beams, plinth beams,girders, bressumers and cantilevers.

Columns, pillars, piers,Abutments, Posts and Struts

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levevl. Thermo-Mechanically Treated bars of grade Fe-500D or more

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Half brick masonary with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1 : 4 (1 cement : 4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work ( Two or more coats applied @1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Steel work welded in built up sections/framed work , including cutting,hosting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings , frames , guard bar , ladder, raillings, brackets, gates and similar works

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :

Art E Mide Construction Private Limited