GE863/EWS-T-32 OF 2022-23

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete, all as specified and directed.

S&F 0.63 mm thick galvanized corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers, in roof walls etc with grade of zinc coating 275, complete, all as specified and directed.

S&F 0.63 mm thick galvanized corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers, in roof walls etc with grade of zinc coating 275 BUT EXCEPT SHEET, complete, all as specified and directed. Note :- Serviceable sheet as obtained from Srl item No 01.00 to be used.

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap bent to a curve (of any radius), fixed with coach screws and washers, in roof walls etc with grade of zinc coating 275,complete, all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws BUT EXCEPT SHEET,complete, all as specified and directed. Note :- Serviceable sheet as obtained from Srl item No 01.00 to be used.

Dismantling of wrought iron or mild steel work any description and fixed in any position, complete, all as specified and directed.

S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W, grade 250, Quality A, including cleats,distance pieces etc, complete, all as specified and directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete, all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer,complete, all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet, complete, all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in unframed work, complete, all as specified and directed.

Dismantling timber scantlings under 40 sq.cm in section, in any positions as in framed work but in fillets, rails, posts, rafters, purlins, etc complete all as specified and directed

M & L 4 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions/ shutters, ceiling etc,complete, all as specified and directed.

S&F hangers 6mm dia G I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, complete, all as specified and directed.

S&F anodised aluminium snap gride of size 605 X 605 mm frame work for false ceiling, complete, all as specified and directed.

S&F Non asbestos fiber cement building board 6 mm thick, fixed to aluminium or MS galvanised snap grid frame work with screw in ceiling, complete, all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with screws of sectional area exc 13 Sqcm & n .exc 25 sq cm, complete, all as specified and directed.

M & L for 2nd class hard wood as in plain fillets, square, rectangular, traingular in section wrought secured with nailsor brads of sectional area exc 3 Sqcm & not exc 6 Sq cm, complete, all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced), complete, all as specified and directed.

Dismanting of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc, complete, all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in levelling course, complete, all as specified and directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:6), complete, all as specified and directed.

M&L for coloured Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding exc. 0.06 sqm but n.exc. 0.11 sqm, in floors etc. Set over and including 15 mm thick screed bed in cm (1:6) and jointed in neat cement slurry and pointed in white or coloured cement to match, complete, all as specified and directed.

M&L for coloured Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6), complete, all as specified and directed.

M&L for 75 mm thick cement concrete type D-2, 1:4:8 (using 40 mm well graded stone aggregate) as in sub base of flooring/Hardstanding, complete, all as specified and directed.

M & L for machine cut kota stone slab flooring 20 to 25 mm thick over and including 20 mm thick screed bed laid in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and morror polishing, complete, all as specified and directed.

S&F of 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like, over and including 20 mm thick screed bed or bedding layer of cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete, all as specified and directed.

M &L for Circular cutting or notching and waste of any thickness and size of tiles, granite and Marble stone, complete, all as specified and directed.

M&L for coloured chequered cement concrete tiles 20cm x 20cm x 25mm/30cm x 30cm x 25 mm thick, With grey cement and pigments, set, jointed and pointed in neat cement slurry ,over and including 20 mm thick screed bed or bedding layer of cement mortar (1:6), over new or existing sub-base in floors, complete, all as specified and directed.

M & L for providing, cement concrete cast in situ 1:2:4 , type B1 (Using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edge including form work, complete, all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar, concrete bedding and removing rubbish off the premises, complete, all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over & including rendering 10mm thick in cement mortar (1:4) on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles, complete, all as specified and directed.

M&L for 75 mm thick cement concrete (1:3:6), type C-1, (using20 mm well graded Stone aggregate), as in plinth protection, finishing cement concrete surface fair and even without using extra cement ,laid in alternate panels including forming joints in 2 mtr intervals and filled with bitumen mastics ,complete, all as specified and directed.

M&L for machine pressed precast interlocking paver block any shape and size conforming to IS -15658-2006 of 60 mm thickness, M-35 Gde with grey cement and pigment over and including 25mm thick sand cushioning, complete, all as specified and directed.

M&L for 100 mm thick cement concrete type B-2, 1:2:4 (Using 40 mm well graded stone aggregate) as in flooring/hardstanding finished cement concrete surface even and smooth without using extra cement, complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames), complete, all as specified and directed.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 Sqm each but with shutters (without taking off shutters from the frames), complete, all as specified and directed.

Taking down Shutters of any description n exc 1 sq.m each,complete, all as specified and directed.

Taking down shutters exc 1 Sqm and n exc 2 Sqm each, complete, all as specified and directed.

Refixing shutters of any description n exc 1 sqm each in the same opening after and including taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws, complete, all as specified and directed.

Refixing shutters of any description exc 1 Sqm but n exc 2 sqm each in the same opening after and including taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws, complete, all as specified and directed.

S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete, all as specified and directed.

S & F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl 5 mm thick teakwood leaping all aroung, complete, all as specified and directed.

S & F 35 mm Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,complete, all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats, complete, all as specified and directed.

S&F for 2nd class hardwood, glazed and skeleton window shutter 30mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etcor provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (b) complete, all as specified and directed.

S&F Factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete, all as specified and directed.

S & F galvanised mild steel wire cloth , 0.56 mm nominal dia of wire and average width of aperature 1.18 mm, complete, all as specified and directed.

S & F in repair galvanised mild steel wire cloth , 0.56 mm nominal dia of wire and average width of aperature 1.18 mm, complete, all as specified and directed.

Hacking Out Old Broken Glass (Any Thickness,Size,Quality Or Description)From Wooden Frames or Stone,Concrete Or Brick Surrounds,Glazed With Putty Or fixed with beads, complete, all as specified and directed.

M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane, complete, all as specified and directed.

S & F of aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt 12 mm dia incl minimum of 6 bolts annd nuts of extruded sections or cast-aluminium alloy and fixed, complete, all as specified and directed.

S & F 100mm butt hinges, medium weight, cold rolled mild steel and fixed, complete, all as specified and directed.

S & F 75mm butt hinges, medium weight, cold rolled mild steel and fixed, complete, all as specified and directed.

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer, complete, all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing, complete, all as specified and directed.

S&F factory made soilid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing, complete, all as specified and directed.

S & F 150mm aluminium, anodised, barrel tower bolts of extruded section etc, complete, all as specified and directed.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21, complete, all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete, all as specified and directed.

S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate, complete, all as specified and directed.

Taking down existing aluminium doors/windows and re-fixing after tighening loose screw including replacement of unserviceable screw, aluminum beading, rubber packing including taking down glass panels & reifixing the same (if glass panels shall be able to re used) otherwise paid and measured separately incl other hardware fitting such hinges, tower bolt, handle etc, complete, all as specified and directed. Note :- floor door spring, mortice lock,tower bolt, handle, tinted glass shall be measured and paid separatly, if the material obtained from the same not possible to be reused.)

S&F 5.5 mm thick tinted glass in aluminium doors & windows with rubber packing, complete, all as specified and directed.

S&F aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete, all as specified and directed.

S&F Mortice brass lock vertical type size 100mm with 4 levers, complete, all as specified and directed.

M&L for welding in repiars n. exc 2.5 cm in length & thickness of metal to be welded n. exc 9 mm, complete, all as specified and directed.

M&L for welding in repairs exc 2.50 cm but n. exc 5 cm in length & thickness of metal to be welded n.exc 9 mm, complete all as specified and directed.

Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing from site, complete, all as specified and directed.

Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing from site, complete, all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tank 500 litre capacity (cylindrical vertical with closed top ,with screwable lid) , double layered ,ISI MARKED , hoisted and fixed in position at any height including reconnetcing/refixing of pipes inlet , out let and air pipe, complete, all as specified and directed.

Supply and fix new rotational moulded polyethylene water storage tank 1000 litre capacity (cylindrical vertical with closed top ,with screwable lid) , double layered ,ISI MARKED , hoisted and fixed in position at any height including reconnetcing/refixing of pipes inlet , out let and air pipe, complete, all as specified and directed..

S & F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s), complete, all as specified and directed.

Disconnecting existing water tank setting aside ( or lowering if required ) for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc, cap exc 250 ltr & n. exc 500 ltrs, complete, all as specified and as directed.

Disconnecting existing water tank setting aside ( or lowering if required ) for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc, cap exc 500 ltr & n. exc 1000 ltrs, complete, all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete, all as specified and directed.

S & F 15mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.

Refixing old steel tubing and connection 15 mm bore in new or old position in wall, ceiling and floor etc, complete, all as specified and directed. Note :- Serviceable pipe obtained from Item No 76.00 to be used.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete, all as specified and directed.

S & F 20mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.

Refixing old steel tubing and connection 20 mm bore in new or old position in wall, ceiling and floor etc, complete, all as specified and directed. Note :- Serviceable pipe obtained from Item No 79.00 to be used.

Supply and fix in repair, Vitreous China wash down water closet EWC (pedestal pattern), standard size , white (including fixing bolt and flush pipe, plastic seat and cover white), closed pattern with flat bottom, mild steel chromium plated or anodised hinging devices, connected to drains outlet including chromium plated steel jet pressure unit, complete, all as specified and directed. MAKE : HINDWARE/PRAYAG/JAQUAR/PARRYWARE/CERA

Supply and fixing in repair of existing water closet (squatt pattern) and foot rest with vitreous china (white) first quality water closet, Orissa pattern size 580x440mm with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet , complete including fixing of flush pipe with seat and making good the disturbed floor surfaces to match with existing and making connections serviceable, complete, all as specified and directed MAKE : HINDWARE/PRAYAG/JAQUAR/PARRYWARE/CERA

S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, complete, all as specified and directed.

S&F in repair Vitreous China Urinals, half stall type ( back or corner wall type), complete including providing and fixing , bedding urinal against wall in cement mortar 1:2 ,pointing around urinal back in cement; flush pipe, grating, spreader and Union for discharge pipe, complte, all as specified and directed.

S&F first quality , Wash basins, vitreous china, white, flat back of size 550x400mm , including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets, complete, all as specified and directed. MAKE :- Wash basin : HINDWARE/ PRAYAG/ JAQUAR/ PARRYWARE/ CERA.

S & F in repairs stop cock/angle cock, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete, all as specified and directed.

Supply only 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete, all as specified and directed.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete, all as specified and directed.

S&F in repair 15 mm bore pillar tap of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight weight 110 gms), complete, all as specified and directed.

S & F in repairs 15mm bore bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete, all as specified and directed.

S&F in repair bib taps 15mm bore of standard PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm- 125gms), complete, all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450 mm, complete, all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm, complete, all as specified and directed.

S&F in repairs Towel Rail 600 mm long of PTMT fixed with and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms), complete, all as specified and directed.

S & F in repairs 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete, all as specified and directed.

S & F in repair PVC (SWR) pipes of 75 mm dia. sinlge socketed in any length with rubber ring joints fixed in walls, complete, all as specified and directed.

S & Fin repair PVC (SWR ), pipes of 110 mm dia single socketed , in any length with rubber ring joints ,fixed to walls or fixed in retaining wall as spout pipe, complete, all as specified and directed .

S & F 110 mm dia bore PVC (SWR) bends any radius, complete, all as specified and directed.

S & F 75 mm dia bore PVC (SWR) bends any radius, complete, all as specified and directed.

S&F in repair CP jet with 15 mm bore flexible connecting pipe (Length of pipe 1200 mm), complete, all as specified and directed.

S & F in repairs stainless steel sink with drainage board made out of 1 mm thick stainless steel sheet, kitchen or laboratory sink with plugs , washers and wasts , including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm , complete, all as specified and directed.

S&F in repairs Stainless steel sink 1.00mm thick stainless steel sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 495mmx420mm with bowl size 410mmx330mmx160mm, complete, all as specified and directed.

S&F in repair urinal spreader of PTMT any colour for fising 15 mm dia pipe (minimum weight 60 gms), complete, all as specified and directed.

S & F in repairs 20 mm dia Aluminium anodised tubular towel rail, D type, 60cm long between flanges, complete, all as specified and directed.

S & F in repair cast iron floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete, all as specified and directed.

S & F in repair Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard ,and railing 60 cm long, complete, all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete, all as specified and directed.

M & L rendering 15mm thick on fair faces of concrete surfaces in cement mortar (1:6) incl finished surface even and smooth without using extra cement, complete, all as specified and directed.

M & L rendering 10mm thick on fair faces of concrete surfaces in cement mortar (1:6) incl finished surface even and smooth without using extra cement, complete, all as specified and directed.

M&L for Rendering 15mm thick on stone masonry surfaces in CM 1:4 finishing even and smooth without using extra cement, complete, all as specified and directed.

M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:4 finished even & smooth without using extra cement, complete, all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering, complete, all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over a alkali resistant primer, complete, all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces including preparation of wall surfaces and applying three coats of white wash, complete, all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces including preparation of wall surfaces and applying two coats of cement base paint, complete, all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coat of oil emulsion distemper, complete, all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coat of white wash, complete, all as specified and directed.

M&L for preparation of old plastered surface of ceiling and applying one coat of white wash, complete, all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coat of cement base paint, complete, all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality), complete, all as specified and directed .

M & L for preparation of old surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying one coats of synthetic enamel paint (ordinary tint), compelete, all as specified and directed.

M&L for removing old paint by paint remover or burning off by blow lamps and cleaning with scrapers, any number of coats and any width or girth, preparation of steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete, all as specified and directed.

M&L for writing building Nos, letters or figures (Block, Roman, Italic or Indian) on wall n. exc 30 cm height with synthetic enamel paint, complete, all as specified and directed.

Note:- The total shall subject to adjustment of credit of Rs 68,787.00 for old Materials as per Schedule of Credit.

Pankaj Builders

M/S JOHN VASSELLY