WBPWD/EE/PMED/NIQ-49/2024-25

Amount

Supply & delivery of 16 Mtr High Mast 3,3 shaft thickness in two sections, Top A/F 150, Bottom A/F 360, Base Plate 520 (O/D)x25 dimension as per manufacture design to suitable for wind speed as per IS:875 with head frame, luminaries carriage suitable to install 8 no. 250 W led flood light fixtures lightning finial along with the other accessories like double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, aviation obstruction light, protection against lightning etc. A) Material grade of shaft shall be of S355JO/JR as per BSEN 10025 or Equivalent IS: 2062 grade E350 (BR) B) Materials grade of Base Plate shall be E250(BR) as per IS:2062 C) Galvanization as per BSEN ISO:1461 [Make – Bajaj/ Valmont/Skipper/Lisert]

Supply & delivery of 8 No.M30X 850 foundation bolts as per EN8 Grade manufactured from special steel along with nuts, washers, anchor plates and templates.

Supply of control panel housing 32 A TPN MCB incomer, 25A Contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power.

Construction of suitable Shallow foundation with M-20 grade concrete for solar mini mast considering soil bearing capacity (SBC) 10T/sq. mtr. at 2 Mtr. depth with all materials and labour and payment made as per PWD civil schedule & as per direction of EIC.

Erection of Mast by using of lifting equipment like hydra etc. and fixing of foundation bolts, anchor plate etc. with necessary arrangement.

Testing & commissioning of all electrical equipment of Mast like, Feeder Pilar, led fixtures, head frame etc. with necessary connection.

Supply & delivery of unique modular 250W LED floodlight made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection, CRI> 70, CCT- 5700 K, 10KV SPD included, System Efficacy ≥ 110 LPW. [Phillips/Bajaj//Lighting Technology/Crompton] [5 Years Warranty on this item]

Supply & delivery of 150 W LED floodlight made up of pressure die cast aluminium housing with integrated IP lens and SMD LEDs with IP66 protection.CRI> 70, CCT- 5700K, System efficacy≥120 LPW, 10KV SPD [Phillips/Bajaj//Lighting Technology/Crompton] [5 Years Warranty on this item]

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower/High Mast or similar structure.

Supply & delivery of LED 18W tube light [Make: Philips...Mas LEDTube 1200mm 18W 865 T8 I – 2100lm]

Fixing of tube light in the existing batten.

Supply & delivery of 240 V, 2.25 micro Farad , P2 type capacitor for ceiling fan.

Fixing of capacitor in existing ceiling fan.

SITC of floor mounted dust & vermin proof (IP-66) feeder pillar with CU bus bars on the angle iron frame structure having front & back openable double door with locking arrangement providing compartmentalize space for 1 No. Energy meter incl. provission of window for meter reading of deep fabricated by 2mm thick MS Sheet incl. S/F the following materials in it including painting etc. to be grounted in ground with CC foundation as required.

a) 415V 63A FP MCB -1 no.

b) 415V 32A FP MCB- 2 nos

c) 100A 4BAR Cu. BUSBAR 4x(25x5mm)x 0.5m- 1 set

d) 4 pole 63 A power contactor- 1 no.

e)Time Switch L&T ASTRO Mini- 1 no.

h) LED INDICATOR (PILOT LAMP)- 1 set

Supplying of 1.1 KV Grade XLPE Aluminium conductor, PVC sheathed, armoured cable conforming to IS 7098, of earthed system of following size. [ Make : Gloster / Polycab / Havells / RR Kabel ] ( Wbsedcl pole - Feeder pillar box )

4 core 16 sqmm

Laying of 1 no. cable upto 4 core 16 smm in UG trench 460 mm wide x 760 mm avg. depth,with brick protec tion on the top of the cable with 8( eight) nos. bricks per meter, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

S&F 415V, 63A TPN SFU with SS enclosure (Make : L&T, Cat. No. SK90486) on angle iron frame on wall incl. S&F 3 nos. DIN type HRC fuse 63A with with nut, bolt & washer etc. incl. powder coated painting as per direction of EIC

Laying of cable upto 4 core 16 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 16 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 core 16 sqmm

Supplying & fixing 40 mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

Cement Concrete road cutting avg. dept. 1.5 ft x avg. width. 1.5ft including mending finishing good damages to original finish concrete floor by net cement concrete.

Earthing with 50 mm dia GI pipe (ISI-Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts below the ground level.

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil.

Connecting the equipments body to earth busbar incl. S & F 25 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

CHANDIMATA TRADERS (BID ID -5637610)

MAA NACHINDA ELECTRIC (BID ID -5625088)

RASH ELECTRICAL WORKS (BID ID -5630555)