AND MAINTENANCEOF SECURITY LIGHTS/ROAD LIGHTS, SOLAR LIGHTS AND STAND BY GENERATOR SETS AT JANGLOTE UNDER GE BASOLI

Amount

Repair/rectification for street/security light/ perimeter light/ flood light any type, capacity & make to make the security/street lights in serviceable condition as intimated by JE E/M / Engineer -in- Charge after rectification/trace out the fault which includes removing of street/security light fitting from LT/HT PCC/steel tubular/swan neck poles, refixing after repair, tightening of loose connection on ACSR conductor/with bus bar chamber/in DB, replacement of ballast, lamp, ignitor, lamp holder, capacitor, replacement of glass, jumper breakage, replacement of connection wire or any other part and refixing in proper alignment on GI pipe bracket or by other means as per site requirement incl replacement of screws,nut,bollts washers as reqd, proper connection with PVC insulation tape etc complete to keep the light in serviceable condition through out the period of contract by repairing one time all as directed to the entire satisfaction of JE E/M / Engineer-in-Charge Note : (i) Worn out/ damaged/ unserviceable parts to be replaced shall be measured and paid for separately under relevent items of sch 'A' as supply only and fixing is deemed to be included under this item. (ii) All the T&P and transportation required for the work shall be arranged by the contractor which shall be deemed to be included in quoted rate. Contractor shall provide the all type of T & P i.e. tools, insulation tape, ladder any type etc to electrician for attending the complaints. The quoted rate include the cost of minor items i.e. screws, nuts, washers for light fitting etc. (iii) Contractor shall provide & maintain the register regarding 100% serviceability of security lights duly signed by the JE/Engr-in-Charge, contractor, unit rep. (iv) The work will be carried out on day to day at as per direction of JE/ Engr-in-charge. (v) The electrician shall receive the complaint from JE /Engineer -In -Charge on complaint slip and after completion of job the slip shall be deposited to JE /Engineer -In -Charge daily duly signed by users. The printed complaint slip and compliant register shall be arranged by the contractor without any extra cost. (vi) The contractor shall arrange one electrician and one helper in one shift for 0900 hrs to 1700hrs on daily basis except sunday and holidays. (vii) An inventory for the parts/spares which are found unserviceable and requir replacement with new parts/spare shall be prepared and kept in record duly signed by Engr-in-charge and contractor. (viii) In case non deployment/absence of staff from duty recovery @850/- per day for electrician and Rs. 550/- per day for helper shall be recovered from the contractor's dues. The record of presence of workmen with name and details shall be maintained with signature of JE E/M, Engr-in-Charge and contractor. The decision of accepting officer shall be final and binding.

Supply only HPSV Lamp of capacity 70 Watts

Supply only HPSV Lamp of capacity 150 Watts

Supply only HPSV Ballast of capacity 70 Watt

Supply only HPSV Ballast of capacity 150 Watt

Supply only HPSV Capacitor of capacity 70/150 Watt

Supply only HPSV iginator of capacity 70/150 Watt

Supply only power tone quartz metal halide lamp tublar (MH-T) Lamp of capacity 150 Watts (white light)

Supply only retrofit CFL 18 Watts Pin type

Supply only Electronic ballast of capacity 18 Watts.

Supply only Holder for HPSV lamp suitable for 70/150Watts fittings

Supply only Driver electronic compact type suitable for LED street light fitting 70 Watt as per sample/required at site complete all as specified and directed.

Supply only Driver electronic compact type suitable for LED street light fitting 90 Wattas per sample/required at site complete all as specified and directed.

Supply only Driver electronic compact type suitable for LED street light fitting 120 Wat as per sample/required at site complete all as specified and directed.

Supply only Chip electronic compact type suitable for LED street light fitting 70 Watt as per sample/required at site complete all as specified and directed.

Supply only chip electronic compact type suitable for LED street light fitting 90 Watt as per sample/required at site complete all as specified and directed.

Supply only Chip electronic compact type suitable for LED street light fitting 120 Watt as per sample/required at site complete all as specified and directed.

Supply only LED street light bulb thread type of capacity 30 Watts complete all as specified and directed

Supply only LED street light bulb thread type of capacity 45 Watts complete all as specified and directed

Supply only porcelain Lamp holder suitable for 30/45 watt LED light fitting thread type complete all as specified and directed.

Supply and fix in repair for street light bracket made to shape at required angle made out of 50mm dia ( light grade ) GI tubing of length not less than 1.2m long suitable for fixing /holding street light fittings including mild steel flate iron 50 x 6 mm clamp 02 Nos with bolts, nuts and washer complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair for 2.5 sqmm PVC insulated and sheathed cable twin core aluminium conductor cable from over head conductor to street light fittings complete all as specified and directed.

Supply and fix in repair / replacement LED street light fitting of capacity 45 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 and impact reistance of IK07 with high power LEDs as light source with electronic chip and driver (lamp type 45W LED) suitable for pole dia 54mm(max)complete with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed. Cat Part No PCGLSP145 of make polycab or equivalent in CG/Bajaj/Philips.

Supply and fix in repair / replacement LED street light fitting of capacity 60 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 and impact reistance of IK07 with high power LEDs as light source with electronic chip and driver (lamp type 60W LED) suitable for pole dia 54mm(max)complete with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed. Cat Part No PCGLSP160 of make polycab or equivalent in CG/Bajaj/Philips.

Supply and fix in repair / replacement LED street light fitting of capacity 72 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 with high power LEDs as light suorce with electronic chip and driver (lamp type 72W LED) suitable for pole dia 54mm(max)complete with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed. Cat Part No PCGLSP172 of make polycab or equivalent in CG/Bajaj/Philips.

Supply and fix in repair / replacement flood light of capacity 200 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver of cat part No PCGLFT10112057 of make polycab or equivalent in CG/Bajaj/Philips. with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed by engr-in-charge

Supply and fix in repair / replacement flood light of capacity 120 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver of Cat Part No PCGLFT10112057 of make polycab or equivalent in CG/Bajaj/Philips complete with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed

Supply and fix in repair / replacement flood light of capacity 80 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver of Cat Part No PCGLFT1028057 of make polycab or equivalent in CG/Bajaj/Philips complete with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed

Supply and fixing in replacement PVC conduit 25mm dia medium grade for fixing along the pole with 02 Nos clamps per pole the connections from junction box to street lights all as specified and directed.

Excavation in trenches not .exceeding 1.5m wide and not exceeding1.5m depth and getting out in any type of soil, complete all as specified and directed .

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc.25 cm complete all as specified and directed .

Removing excavated material n exc. 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified .

Material and labour for well burnt, old size Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed.

Material and labour for sand cushioning to under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable as specified in SSR 1991 of part -I complete all as specified and directed.

Material and labour for prestressed concrete pole, 9.0 metres long, 102mm x 172mm at top and 102mm x 279mm at bottom,class 10 complete all as specified and directed . Note :- Excavation earth work and PCC work shall be measured and paid for separately under respective items.

Material and labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation & filling of pole/stay, complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping of pole, as in benching including weathering slightly chamferred angles and finished exposed surfaced even and smooth including necessary form work, complete all as specified and directed.

Material and labour for Continuous earth wire/guard cradle horizontal/rectangular fabricated with 4mm dia galvanized mild steel, binding wire including dismantling and taking out the damaged broken GI Earth wire in any position complete all as specified and directed .

Material and labour for Aluminium conductor, steel reinforced (ACSR) conductor of any size for OH lines including stretching, binding with aluminium binding wire, jumpers, line taps etc including dismantling and taking out the damaged broken ACSR conductor of any size from service feeder or distribution span in any position complete all as specified and directed.

Supply and fix for Stay assembly complete with stay rod 20 mm dia and all accessories all as shown in electrical plate No. 1 of SSR Part-I including dismantling and taking out the damaged broken stay assembly in any position and removal for further disposal complete all as specified and directed. Note :- Excavation, earth work and PCC work shall be measured and paid separately under respective items.

Material and labour for loop insulator vitreous porcelain, white,brown or green with overall dimensions 140mm,clearance from hole 25.5 mm complete all as specified and directed .

Material and labour for galvanised stay strand of size 7/4 mm ccomplete all as specified and directed .

Supply and Fix for structural steel work as in cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections, including , nuts, bolts, washers, welding , bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one priming coat of red oxide, one under coat , one finishing coat of aluminium paint and epoxy coating, complete all as specified and directed.

Supply and Fix for shackle type, polycaronate Insulator incl one galvanised mild steel spindle, two galvanised iron washers,and one galvanised iron nut, 100 mm height, 115 mm dia ,suitable for 1100 Volt complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 16 sq mm 4.0 core complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 16 sq mm 2.0 core complete all as specified and directed.

Supply and fix for DWC high densiy polyethylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laidalong pole/along wall/in PCC on GL/roof and including all fittings as required at site including taking down the old unserviceable pipe complete all as specified and directed.

Supply and fix in repair for junction box of size 300x250x150mm made out of 1.6 mm thick CRCA sheet powder coated front hinged door with openable and self closing arrangements including aluminium bus bar 3 Phase 4 wire system of size 20mm x 5mm fixed on SMC/DMC insulators and cable entry glands for connections and MCB SP 6 Amps-01 No all as required and fixed to poles with MS clamp made out of MS flat iron of size 25x5mm and including nuts, bolts and washers complete all as specified and directed.

Supply and fixing in replacement polycarbonate globe prismatic finish of size 200 mm ampore in shape in and including with holder B-22 having provision for fixing on pipe and LED lamp all as specified and directed. Make : Bajaj/CG/Philips.

Supply and fixing in replacement polycarbonate globe prismatic finish of size 250 mm imperial in shape in and including with holder B-22 having provision for fixing on pipe and LED lamp all as specified and directed. Make : Bajaj/CG/Philips.

Supply and fixing in replacement polycarbonate globe prismatic finish of size 300 mm diva in shape in and including with holder B-22 having provision for fixing on pipe and LED lamp all as specified and directed. Make : Bajaj/CG/Philips.

Supply and fixing in replacement polycarbonate globe prismatic finish of size 385x340 mm seattle in shape in and including with holder B-22 having provision for fixing on pipe and LED lamp all as specified and directed. Make : Bajaj/CG/Philips.

M&L for repair and maintenance of solar street light, solar panel (electronic) and wiring including replacement of CFL tube charging of solar battery including testing, filling of acid solution and making functional complete all as specified and directed

Supply and fix Off load change over switch four pole with sheet metal enclosure of capacity 100 Amps , 415 Volts,Ac with necessary nuts, bolts and washers including necessary electric connections complete all as specified and directed

Supply and rewirable switch fuse unit double pole 240 volts of rating 32 Amps with rewirable type carrier of cat part No RCDP0032 with sheet metal enclosure fixed with necessary nuts, bolts and washers including necessary electric connections all as specified and directed of cat part No RCDP0032 of make Indo Asian or equivalent in C&S/Havells

Supply, install, testing and commissioning in replacement of factory made and tested (including CPRI approved test certificate) LT Feeder Pillar box (KISOK) outdoor type, of size 0.75 x 0.6 x 0.4 Mtr , plateform mounted, suitable for 415 volts 3 Phase 4 wire, 50 Hz AC supply system all as specified and directed, having bus bar chamber with insulated Aluminium bus bars100 Amps ratings installed on porcelain insulators, The panel shall be dust and vermin proof, made of 3.15mm thick CRCA MS Sheet and 40 x40 x5mm thick angle iron for base frame work. The complete feeder pillar box shall be powder coated including internal wiring with PVC insulated solid copper conductor FRLS cables approximate size but not less than 4 Sqmm front opening type with appons for cable entry with double door shutter including locking arrangement as per nanufactures with 2 keys. the scope of Work includes the following:- Incomming:- (a) MCCB 63 Amps rating, 415 V, 4 Pole with breaking cap 16kA, -01 No (b) LED indicating lamp RYB-01 Set (Set of three) Outgoing:- (a) Analog time switch 65 Amps of make Indoasian and with suitable size of 3 pole power contractors- 01 No Toggle switch- 01 No, out going MCB TPN 40 Amps - 02 Nos MCB SPN 40 Amps - 02 No Note:- (i) Panel shall be fixed on angle iron frame with PCC 1:2:4 type D-2 using 20mm graded stone aggregate , 45cm height from normal ground level. (ii) All incomming MCCB shall be connected through MCCB spreraders with incomming bus bar and incoming cable shall be connected with incomming bus bar. (iii) Cost of angle iron frame & platform , MCCB spreaders, cable glands, locking arrangements with lock and key and any addition/ alternation if required will be included in this item. No extra cost will be paid to Contractor.

Repair and maintenance of DG sets 82.5 KVA capacity with carry out servicing as per the OEM is manual based as hours run/ vintage of the DG set, inspecting all the parts for its further serviceability i.e air intake system, fuel system, lubricating system, cooling system and electrical system,cleaning,calibration of each parts of the system, replacement of defective parts, and fixing of serviceable parts, rectification of leakage of fuel and oil,, cleaning /replacement of all the filter elements,calibration of FIB, toping up of radiator coolent replacement of engine gasket set, replacement of engine oil, complete cleaning of out door body and inner body. Notes for Sr Item No 57 to 61 (i) New spare parts and engine oil shall be measured and paid separately under respective items. (ii) Labour charges for replacement of old engine oil and old defective spare parts shall be deemed included in quoted rates. (iii) Cost of routine lubrication/ greasing to spare parts, lubricants/grease, tightening of nut, bolts and washers etc. shall deemed included in quoted rates. (iv) Cost of fixing and transportation of all components/ spare parts required being repair, of DG sets from site to workshop for repair and workshop to site after repair shall be deemed included in quoted rates. (v) Periodical routine maintenance/ checkup of diesel generator sets shall be carried out as per TI-04 of 1984 and maintenance record, prepared/ maintained by contractor and signed by concerned JE E/M, Engineer-In-Charge and Contractor. This maintenance record shall be produce to Garrison Engineer whenever asked. (vi) Periodical routine maintenance/ checkup of diesel generator sets shall be carried out as per following periodicity: a) Stage-I (Monthly): (i) Cleaning of air cleaner/ filter. (ii) Changing of lubricants and oil filter elements. (iii) Cleaning of fuel tanks and cleaning of fuel filter elements. (iv) Cleaning of radiator cooling fins and top up of coolant. v) Cleaning of line cylinder head fins, in case of air cooled engines. (vi) Checking of all electrical instruments/indicating or any other gauge i.e. frequency meter,voltmeter, ammeter, revolution meter, Hrs run meter, water temp gauge, fuel gauge etc for satisfactory functioning. (b) Stage-II (Quarterly): (i) Changing of engine oil, if required, and clean the pre-cleaner bowl. (ii) Check/ open radiator fins, and clean, if chocked/ blocked. (iii) Check button filter in banjo bolt of feed pump. (iv) Drain the water from water separator, if provided. (v) Check all external fasteners as per specified torques. (vi) battery lead connections. (vii) Check belt alignment and belt condition. (viii) Check turbo changer. (ix) Leakage in air take/ exhaust of exhaust piping (x) Lubrication to the turbo charger,Oil filter.

All as per srl item No 57 above but 70 KVA DG Set

All as per srl item No 57 above but 63/62.5 KVA DG sets

All as per srl item No 57 above but 40/31.5 KVA DG sets

All as per srl item No 57 above but 10 KVA DG sets

Supply only oil filter suitable for 82.5 KVA DG Set

Supply only fan belt suitable for 82.5 KVA DG Set

Supply only hose pipe with two Nos metallic clip suitable for 82.5 KVA DG Set

Supply only Diesel pipe(steel) with banjo connection suitable for 82.5 KVA DG Set

Supply only air filter suitable for 82.5 KVA DG Set

Supply only fuel filter suitable for 82.5 KVA DG Set

Supply only oil filter suitable for 70 KVA DG Set

Supply only fan belt suitable for 70 KVA DG Set

Supply only hose pipe with two Nos metallic clip suitable for 70 KVA DG Set

Supply only Diesel pipe(steel) with banjo connection suitable for 70 KVA DG Set

Supply only air filter suitable for 70 KVA DG Set

Supply only fuel filter suitable for 70 KVA DG Set

Supply only oil filter suitable for 63.5/62.5 KVA DG Set

Supply only fan belt suitable for 63.5/62.5 KVA DG Set

Supply only hose pipe with two Nos metallic clip suitable for 63.5/62.5 KVA DG Set

Supply only Diesel pipe(steel) with banjo connection suitable for 63.5/62.5 KVA DG Set

Supply only air filter suitable for 63.5/62.5 KVA DG Set

Supply only fuel filter suitable for 63.5/62.5 KVA DG Set

Supply only oil filter suitable for 40/31.25 KVA DG Set

Supply only fan belt suitable for 40/31.25 KVA DG Set

Supply only hose pipe with two Nos metallic clip suitable for 40/31.25 KVA DG Set

Supply only Diesel pipe(steel) with banjo connection suitable for 40/31.25 KVA DG Set

Supply only air filter suitable for 40/31.25 KVA DG Set

Supply only fuel filter suitable for 40/31.25 KVA DG Set

Supply only oil filter suitable for 10 KVA DG Set

Supply only fan belt suitable for 10 KVA DG Set

Supply only hose pipe with two Nos metallic clip suitable for 10 KVA DG Set

Supply only Diesel pipe(steel) with banjo connection suitable for 10 KVA DG Set

Supply only air filter suitable for 10 KVA DG Set

Supply only fuel filter suitable for 10 KVA DG Set

Supply only coolant fluid of make as approved by Engr-in-Charge suitable for radiator of DG set of any capacity/make complete all as specified and directed.

Supply only Engine oil/ lubricant, 20 W 40 grade or any other grade as recommended by OEM of Engine or Engr-in-Charge suitable for DG set of any capacity and any make, complete all as specified and directed.

Supply and fix in repair of lead acid battery for solar light 12 volt, 100 AH heavy duty maintenance free incl initial charged complete all as specified and directed.

Supply and fix in repair of lead acid battery 12 volt, 180 AH heavy duty maintenance free incl initial charged complete all as specified and directed.

M&L for replacement of old unserviceable asbestos rope of existing dia, wrapped over the pipe, complete all as specified and directed by Enger-in-charge.

Replacement of old damaged battery lead with new battery lead of copper conductor of 50 Sqmm cross-sectional area, multistranded, single core, PVC insulated fitted with lugs/ terminals at one end and brass terminals at other end, complete all as specified and directed. (Note: The battery lead replaced shall have colour as per colour coding. The brass terminal provided on battery end side shall be measured & paid separately.)

Taking out old defective repairable injection nozzle from existing DG set of 160 to 100 KVA capacity and transport to workshop for any type of repair, overhauling and calibration including installation back to same DG set, including testing, complete all as specified and directed.

Taking out old defective repairable injection nozzle from existing DG set of 63.5 to 30 KVA capacity and transport to workshop for any type of repair, overhauling and calibration including installation back to same DG set, including testing, complete all as specified and directed.

Cleaning of fuel tank of any capacity for DG set 160 KVA to 30KVA any type(inbuilt in canopy/ separate storage tank) DG Set by removing all silt /dirt/ all residual, foreign particles any type etc, removing any type of leakage by welding/brazing and writing date of cleaning with synthetic enamel paint complete all as specified and directed.

Supply and fix in repair oil pressure gauge of suitable range as recommended by OEM of DG set for diesel engine of Diesel Generator set of any capacity and any make, complete all as specified and directed.

Supply and fix in repair water temperature gauge of suitable range as recommended by OEM of DG set for diesel engine of Diesel Generator set of any capacity and any make, complete all as specified and directed.

Taking out FIP from DG set of 30/40 KVA capacity, transportation to manufacturer's authorised service centre and recallibration & transpotation to same or other location as directed incl. replacement of all necessary spare parts such as delivery valves , plunger , 'O' ring spring etc complete all as specified and directed.

Taking out FIP from DG set of 62.5/100 KVA capacity, transportation to manufacturer's authorised service centre and recallibration & transpotation to same or other location as directed incl. replacement of all necessary spare parts such as delivery valves , plunger , 'O' ring spring etc complete all as specified and directed.

Repair and maintenance of DG set control panel, checking all the electrical connections of engine/alternator/ control panel instruments ie lub oil, pressure gauge,temprature gauge, ameter, battery , volt meter,ac volt meter,ac ameter, frequecny meter etc, calibration of modules microprocessor, tightening all the connection, replacement of defective wiring & cable and lugs of DG set of cap 30KVA to 63KVA DG set and replacing of the following parts spare partsshall be measured and paid separately under respective items as supply only as under :-

Supply only Voltmeter digital/analog type 96x96mm having range as per existing

Supply only Ammeter digital/analog type 96x96mm having range as per existing

Supply only Frequency meter digital/analog type 96x96mm

Supply only Power factor meter analog type or as per existing

Supply only Multifunction digital meter as per existing to display the various values i.e. voltage, current, load, PF, frequency for single phase as well as for 3 phase complete as per old existing one.

Repair and maintenance to door of DG set , incl taking down door to the work shop from site and fixed suitable new hinges incl welding work if required and painting the same as existing colour and refixing the same on DG set complete all as specified and directed.

Taking down radiator of DG set of cap 40/62.5 KVA and repairing/cleaning and refixing the radiator , including any welding (if leakage is noticed) complete all as specified and directed

Dismanting the alternator assy of DG set of capacity 100 to 50 KVA from the foundation after disconnecting the electric connection, carrying the same to workshop, dismating of alternator and taking down wornout windings of rotor filed coils and excitor coils, rewinding the starer, rotor and excitor with existing gauge, replacement of insulation material, heat varnishig provision of connecting leads and terminal plates etc to make the alternator fully servicable,re-assembing the alternator, shifting back to the installtion, assembling the same with engine, making electric connectios, testing and commissioning, complete all as specified and directed

Dismanting the alternator assy of DG set of capacity 40/30 KVA from the foundation after disconnecting the electric connection, carrying the same to workshop, dismanting of alternator and taking down wornout windings of rotor filed coils and excitor coils, rewinding the starer, rotor and excitor with existing gauge, replacement of insulation material, heat varnishig provision of connecting leads and terminal plates etc to make the alternator fully servicable,re-assembing the alternator, shifting back to the installtion, assembling the same with engine, making electric connectios, testing and commissioning, complete all as specified and directed

Replacement of water pump assembly including pulley suitable for DG set of capacity 82.5 KVA/62.5/63 KVA/50 KVA complete in all respect

Replacement of water pump assembly including pulley suitable for DG set of capacity 40/30 KVA complete in all respect

Supply and fix in repair for bus bar chamber outdoor type, comprising of encloser made out of 3.15 mm thick CRCA sheet of size 0.6 X 0.50 X 0.35 mtr , powder coated with 04 Nos of aluminium bus bar of 100 Amps 1100 volts grade, fixed and including insulators with provn of 04 X incoming/outgoing cable hole and provided with rubber bushes with provn of earth connection duly provided with angle iron frame stand of size 40x40x5 mm with 40 cm grouted in PCC and 40 cm above the ground level in and including with necessary PCC and earth work complete all as specified and directed.

Standard engineers

Ashoka Engineers

KALSI CONSTRUCTION CO