Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.0 CrAccepted-AOC PLOT NO 17 NEAR POLICE REST HOUSE GROUND FLOOR PALAM ROAD SECTOR 22 GURUGRAM GURUGRAM HARYANA 122015 | GURUGRAM | GURUGRAM | HARYANA | 122015 | ₹1.0 Cr | 1 | Accepted-AOC LOA Issued |
| 2 | 2₹1.2 Cr+₹14.1 L (13.5%)Rejected-Finance BUILDING NO 37 MOHAN RAM MANDIR TIGRA VILLAGE GURUGRAM 2024R18309 | GURUGRAM | GURUGRAM | HARYANA | ₹1.2 Cr+₹14.1 L (13.5%) | 2 | Rejected-Finance 2 |
| 3 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 5 | Not Admitted-Fee/PreQual/Technical 3173 31 VISHNU GARDEN | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | THE VENKATESHWARA COOPERATIVE LABOUR & CONSTRUCTION SOCIETY LIMITED GURUGRAM L1 | THE BHAVYA CO-OPERATIVE LABOUR AND CONSTRUCTION SOCIETY LIMITED L2 |
|---|---|---|---|---|---|
| 1.00 | Weld Mesh Panels with Fitting Accessories:
(a). Weld Mesh Panels:
i. Weld Mesh Panels manufactured with electrical resistance welded galvanized wires and
subsequently powder coated as per specifications mentioned under.
ii. Weld mesh panel for fence will meet the standards of IS 1566/ IS 4849 with the following
key specifications apart from the other points in the governing specification:
iii. Panel size: 2500 mm X 915 mm (W x H). Tolerance of plus / - 2 %
Mesh Size: 50 mm X 150 mm (W X H). Tolerance of plus / - 2 mm
iv. Weld Shear strength: Minimum 50 % of the breaking strength of the smallest wire (In
this case the vertical wire)
v. Mesh Wire: Galvanized MS wire
Horizontal wire, Dia. 5.0 mm ( plus /- 0.05mm): Vertical wire, Dia. 5.0 mm( plus /-0.05mm)
Tensile Strength of wire: Min 500 N/sq.mm: Specification for wire: IS 280
vi. Galvanizing of wire: 100 – 120 GSM as per IS 4826 (Measurement as per IS 6745)
Uniformity of Coating: As per IS 2633: Adhesion test for coating: As per IS 2629 (1985)
vii. Powder Coating: The galvanized panels are subsequently single powder coated after
welding with a thickness of 60 to 80 microns.
viii. Colour: RAL 6005 (Military Green): Coating Standard: EN 10245-1/ IS 13871
ix. Make : Akzonobal / Jotun.
x. Other coating requirement: Powder coating should withstand 720 Hours of salt spray test
as per ISO 12944, 1000 hrs of QUV-B Weatherometer Test, Adhesion test,
Electrochemical Impedance Spectroscopy Test (Type Test Certificate for the coating
standards from renowned Laboratories clearly indicating that the coating passes C3 or
higher corrosion protections standard is to be submitted by the bidder along with technical
bid).
xi. Refer drawing of Panel, attached herewith. 25 mm pointed wires should be left on both
sides (top and bottom only), V-band range: 100 mm to 110 mm
xii. Qty: 400 Panels / KM
(b) Square Clamp
i. Type: Square Clamp with Side lock.
ii. Specification: 65X35MM
iii. Outer Diameter: 65 mm plus /- 1 %
iv. Thickness: 3.00 mm plus /- 10% (Medium G | 5,584 | Meter | 1,550 ₹86,55,200 Lowest | 1,800 ₹1,00,51,200 |
Tender Value
₹100.0 L
EMD Value
₹2 L
Closing Date
5 Jun 2026, 12:00 pmClosed
Tushar Yadav
Municipal Corporation Gurugram
Fencing and beautification of Central Verge on Sai Dham Marg in Uppal South End under Ward No. 16 Zone-1, MCG.
2026_HRY_524363_1
2026A1213118 A1D6 4B77 924C 95A7B3798CED285ULB
Open Tender
Civil Works
Works
90 days
Gurugram
This work will be reserved only for Cooperative Labour and Construction Societies upto the rates allotted in the immediate past for similar nature of work.
2 documents required · 2 mandatory
₹5,000
₹2 L
Yes
6 Jul 2026
26 May 2026
5 Jun 2026
26 May 2026
5 Jun 2026
26 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Weld Mesh Panels with Fitting Accessories:
(a). Weld Mesh Panels:
i. Weld Mesh Panels manufactured with electrical resistance welded galvanized wires and
subsequently powder coated as per specifications mentioned under.
ii. Weld mesh panel for fence will meet the standards of IS 1566/ IS 4849 with the following
key specifications apart from the other points in the governing specification:
iii. Panel size: 2500 mm X 915 mm (W x H). Tolerance of plus / - 2 %
Mesh Size: 50 mm X 150 mm (W X H). Tolerance of plus / - 2 mm
iv. Weld Shear strength: Minimum 50 % of the breaking strength of the smallest wire (In
this case the vertical wire)
v. Mesh Wire: Galvanized MS wire
Horizontal wire, Dia. 5.0 mm ( plus /- 0.05mm): Vertical wire, Dia. 5.0 mm( plus /-0.05mm)
Tensile Strength of wire: Min 500 N/sq.mm: Specification for wire: IS 280
vi. Galvanizing of wire: 100 – 120 GSM as per IS 4826 (Measurement as per IS 6745)
Uniformity of Coating: As per IS 2633: Adhesion test for coating: As per IS 2629 (1985)
vii. Powder Coating: The galvanized panels are subsequently single powder coated after
welding with a thickness of 60 to 80 microns.
viii. Colour: RAL 6005 (Military Green): Coating Standard: EN 10245-1/ IS 13871
ix. Make : Akzonobal / Jotun.
x. Other coating requirement: Powder coating should withstand 720 Hours of salt spray test
as per ISO 12944, 1000 hrs of QUV-B Weatherometer Test, Adhesion test,
Electrochemical Impedance Spectroscopy Test (Type Test Certificate for the coating
standards from renowned Laboratories clearly indicating that the coating passes C3 or
higher corrosion protections standard is to be submitted by the bidder along with technical
bid).
xi. Refer drawing of Panel, attached herewith. 25 mm pointed wires should be left on both
sides (top and bottom only), V-band range: 100 mm to 110 mm
xii. Qty: 400 Panels / KM
(b) Square Clamp
i. Type: Square Clamp with Side lock.
ii. Specification: 65X35MM
iii. Outer Diameter: 65 mm plus /- 1 %
iv. Thickness: 3.00 mm plus /- 10% (Medium G | 5,584 | Meter | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.78 MB
BOQ_603309.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .