Loading…
Loading…
Tender Value
₹10.8 L
EMD Value
₹21,564
Closing Date
8 Jun 2026, 3:00 pm3d left
Executive Engineer
Office of Executive Engineer, SWBDCMD, PWD, B-6, NCC Building, Safdarjung Enclave, New Delhi
EOR to SDM Office Complex, South West, Najafgarh, New Delhi. SH- Repair renovation of tehsildar office Certificate room at SDM Office.
2026_PWD_292488_1
17/EE/SWBDCMD/2026-27
Open Tender
Civil Works
60 days
B-6, NCC Building
Please refer Tender documents.
13 documents required · 13 mandatory
₹0
₹21,564
2 Jun 2026
2 Jun 2026
8 Jun 2026
2 Jun 2026
8 Jun 2026
2 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ) | 0.35 | cum | 9,045.75 | ₹3,166.01 | BI01010001010000000000000515BI0100001113 |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | 8 | sqm | 392.15 | ₹3,137.2 | BI01010001010000000000000515BI0100001113 |
| 3 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 42 | kg | 107.85 | ₹4,529.7 | BI01010001010000000000000515BI0100001113 |
| 4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) | 5 | sqm | 1,123.8 | ₹5,619 | BI01010001010000000000000515BI0100001113 |
| 5 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm | 13 | sqm | 5,413.5 | ₹70,375.5 | BI01010001010000000000000515BI0100001113 |
| 6 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 3 | sqm | 3,167.95 | ₹9,503.85 | BI01010001010000000000000515BI0100001113 |
| 7 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | 2 | each | 1,124.85 | ₹2,249.7 | BI01010001010000000000000515BI0100001113 |
| 8 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm | 19 | each | 115.15 | ₹2,187.85 | BI01010001010000000000000515BI0100001113 |
| 9 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | 36 | each | 66.25 | ₹2,385 | BI01010001010000000000000515BI0100001113 |
| 10 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 10 x 120 mm | 20 | each | 170.95 | ₹3,419 | BI01010001010000000000000515BI0100001113 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.85 MB
BOQ_388491.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid