Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.0 LAccepted-AOC NAGAR PANCHAYAT PATHARDEVA DEORIA | L1 | Accepted-AOC OK | |
| 2 | L2₹29.8 L+₹5.8 L (24.1%)Rejected-AOC | L2 | Rejected-AOC OK | |
| 3 | L3₹31.6 L+₹7.6 L (31.9%)Rejected-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L3 | Rejected-AOC OK | |
| 4 | L4₹31.8 L+₹7.8 L (32.4%)Rejected-AOC | L4 | Rejected-AOC OK | |
| 5 | L5₹33.3 L+₹9.4 L (39.0%)Rejected-AOC NOT FOUND | L5 | Rejected-AOC OK |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
23 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF Bhisiana
HQ CWE AF Bhisiana
CWE(BHI)/SIR-46/2022-23
2022_MES_570993_1
CWE(BHI)/SIR-46/2022-23
Open Tender
Civil Works
Item Rate
180 days
AF Stn Sirsa
AS PER COVER 1
6 documents required · 6 mandatory
₹500
Yes
GE AF Sirsa
₹74,000
Yes
6 Feb 2023
23 Dec 2022
25 Jan 2023
23 Dec 2022
23 Jan 2023
11 Jan 2023
23 Dec 2022 - 30 Dec 2022
Amount
Supply,laying,jointing and testing, fixing to wall using clamps/pole/floor or in air or passing through pipes/ducts/road/path/drain, laid in trenches, 1100 volts grade heavy duty electric cable XLPE insulated,screened ,PVC bedded, galvanised steel wire or wire armoured with electric power cable 1100 volts grade with stranded aluminium conductor of size 3.5 core 150 sqmm confirming to IS - 7098 Part-1 and its latest amendments, complete all as specified and as directed by Engr-in-Charge.
S&F for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm, 3 core complete all as specified and as directed by Engr-in- charge.
S&F for Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5/4.0 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm complete all as specified and as directed by Engr-in- charge.
M&L for Fault detection UG Cable by using cable fault detector/locator vehicle mounted to a acuuracy of 2 mtr for various location of any size and type upto lenghth of 250 mtr of 11 KV/33KV HT line NOTE- (i) After identifiy the fault location, the fault rectification will be sole responsibility of the contractor (ii) The cable straight through joint/ end termination will be measured and paid seperately in relevant itms (iii) Any civil work required at site for ilying of cables shall be included in quoted rate (iv) Any shifting of cable and any type of fault detector or machine from one location to another , will be responsibility of contractor, and deemned to be included in quoted rates.
Supply,laying, jointing and testing,XLPE insulated screened PVC bedded, galvanised steel strip or wire, electric power HT cable(heavy duty) suitable for earthed system with Stranded compacted circular Aluminum (H4 Grade) Conductor, shielded with black extruded semiconducting compound XLPE insulated, core shielded with black extruded semi-conducting compound, copper tape, coloured strips having Red, Yellow & Blue for core identification,single layer of round galvanized steel strip armoured and black extruded PVC (Type ST-2), overall sheathed, conforming generally to IS:7098(Part-II)/1985 and its latest amendments of size 6.35/11KV ( E) volts grade ,cross sectional area 95 sqmm, 3 core, laid in trenches/ducts/pipes etc complete all as specified and as directed by Engr-in- charge.
Supply, installation , testing and commissioning of HT feeder panel Outdoor type ( Size of HT Panel Size= 1.2x0.6x 0.8 Mtr (lxbxh) ) confirming to IS 8623 Part I(one) ,CPRI approval , totally enclosed vermin proof suitably ventilated for 3 phase ,11000 Volt, 50Hz, AC supply, outer shell shall be made out of 3.0mm thick CRCA sheet & MS angle section of suitable size for frame , factory fabricated , compartmentalized inner shell shall be made of out of 2.0mm thick CRCA sheet . only Front door opening with locking arrangement at front. Protection of enclosure IP 56 as per IS-2147 of 1962 with pre- treatment through 7 tank hot chemical process prior to powder coating and powder coated with minimum 50-70 micron of approved colour. The bottom of outer shell contains a detachable plate having provision for entry of armoured cable of adequate size. Computer cut self adhesive vinyl danger notice plate having conventional symbol of bones and skull to be provided . EPDM gasket of appropriate shape and size provided at all joints, doors and covers including suitable size angle iron/flat iron frame work / support required with four legs 60 cm long using angle iron 40x40x6mm , air passing holes and locking arrangement at front with duplicate keys and making connection of incoming and outgoing cable using proper cable lugs,legs grouted in PCC 1:2:4 and making good disturbed surface complete and comprising of the following :- TPN Copper electrolytic grade bus bar of capacity 630 Amps for phases & 400 Amps for neutral and auxillary busbar to support main busbar. duly supported on SMC/DMC, busbar supports and insulated with colour coded heat shrinkable sleeve. Note:(i) HT Feeder Panel shall be CPRI approved (ii)Contractor shall submit the following Test report i.e. IP Test Report and verification of short circuit withstand test report issued by CPRI in respect of HT Feeder Panel.
Supply, installation , testing and commissioning of LT panel outdoor type ( Size of Panel Size= 1.3x0.4x1.85 Mtr (lxbxh) ) confirming to IS 8623 Part I(one) ,CPRI approval , totally enclosed vermin proof suitably ventilated for 3 phase , 4 wire 415 Volts, 50Hz, AC supply, outer shell shall be made out of 3.15mm thick CRCA sheet & MS angle section of suitable size for frame , factory fabricated , compartmentalized inner shell shall be made of out of 2.0 mm thick CRCA sheet for control gear. Front and back door opening with locking arrangement at front. Protection of enclosure IP 56 as per IS-2147 of 1962 with pre- treatment through 7 tank hot chemical process prior to powder coating and powder coated with minimum 50-70 micron of approved colour. The bottom of outer shell contains a detachable plate having provision for entry of armoured cable of adequate size , the required no of holes to be fixed with chromium plated brass cable glands of suitable size for entry and exit. Computer cut self adhesive vinyl danger notice plate having conventional symbol of bones and skull to be provided . EPDM gasket of appropriate shape and size provided at all joints, doors and covers including suitable size angle iron/flat iron frame work / support required with four legs 60 cm long using angle iron 40x40x6mm , air passing holes and locking arrangement at front with duplicate keys and making connection of incoming and outgoing cable using proper cable lugs,legs grouted in PCC 1:2:4 and making good disturbed surface complete and comprising of the following :- A. (i) TPN Copper electrolytic grade bus bar of capacity 300 Amps for phases & 250 Amps for neutral.and auxillary busbar to support main busbar. duly supported on SMC/DMC, busbar supports and insulated with colour coded heat shrinkable sleeve. (ii) Digital multifunction meter(V,A,KW,KWH),415V AC alongwith C.T’s of suitable ratio (set of three),class 1.0, complete. (iii) Indication lamps LED type (RYB) = 01 Set of three. CTs 500/5A class 1.0,15VA(Cast Resin) for metering-03 nos . (iv) Internal wiring, with suitable size of FRLS copper conductor cable.
B. INCOMER: (i)MCCB 250 Amp 4 pole,16 KA ,Ics=100% Icu, with fixed magnetic and adjustable thermal release,adjustable overload 80-100%and adjustable short ckt 5 to 10ln setting complete with phase seperator - 01 nos C. OUTGOING : (i) MCCB 100 amp 4 pole,16 KA ,Ics=100% Icu ,with fixed magnetic and adjustable thermal release,adjustable overload 80-100%and adjustable short ckt 5 to 10ln setting complete with phase seperator - 02 nos (ii) MCCB 63 amp 4 pole,16 KA ,Ics=100% Icu ,with fixed magnetic and adjustable thermal release,adjustable overload 80-100%and adjustable short ckt 5 to 10ln setting complete with phase seperator - 02 nos (iii) Phase sequence corrector unit -01 nos complete all as speified and as directed by Engr-in-charge. Note:(i) LT Panel shall be CPRI approved (ii)Contractor shall submit the following Test report i.e. IP Test Report and verification of short circuit withstand test report issued by CPRI in respect of LT Panel. (iii) Contractor shall submit drawing for approval prior to place order.
Supply and fix CI cable route indicator 150mm dia , 5mm thick duly engraved with " HT 11000 volts" having CI rod 10mm dia, 50 to 70 cm long, duly welded to round plate and painted with 2 coats of synthetic enamel paint over a coat of red oxide primer, complete with grounting in PCC 1:4:8, complete all as specified and as directed by Engr-in-charge.
M & L for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron earth strip 25 x4mm as earth lead up to test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1 using 20mm gradede stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with expanded metal(weight not less than 4 kg/sqm), and frame of angle iron 25x25x6mm with lugs 02 nos with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GI earth wire protection pipe 40mm bore up to main board complete as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion, complete all as specified and as directed by Engr-in-charge.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as mass concrete for foundation of GI tubing /Pole, complete all as specified and as directed by Engr-in-charge.
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching including whethering slightly chamfered angles and finished exposed surfaces even and smooth including necessary form work for concrete eathing pit, complete all as specified and as directed by Engr-in-charge.
M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in benching including whethering slightly chamfered angles and finished exposed surfaces even and smooth including necessary form work for concrete eathing pit, complete all as specified and as directed by Engr-in-charge.
M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure, complete all as specified and as directed by Engr-in-charge.
Excavation in trenches in hard / dense soil n.exc 1.5 mtr wide & n.exc 1.5mtr in depth and n. exc. 10sqm on plan for laying cables in trenches /erection of pole / stay assembly and getting out, complete all as specified and as directed by Engr-in-charge.
Returning filling in trenches, spreading, levelling, watering and well ramming in layers n.exc 25cm in hard /dense soil, complete all as specified and as directed by Engr-in-charge.
Removing of surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified and directed by Engr-in-Charge.
M & L for sand cushioning to underground cable with dry sand locally available 8cm thick before laying of the cable and 15cm thick after laying and stretching the cable below the bricks/PCC cover, punning of sand using suitable T&P as per site condition, complete all as specified and as directed by Engr-in-charge. Note: Punned thickness of sand to be consider for measurement purpose .
Supply and laying un-reinforced pre cast concrete cable cover confirming to IS:5820 with minimum average breaking load capacity 200 kgs for unreinforced covers , class LV Type 1, flat, size 250mm x 150mm x 40mm, complete all as specified and as directed by Engr-in-charge.
Supply and laying un-reinforced pre cast concrete cable cover confirming to IS:5820 with minimum average breaking load capacity 300 kgs for unreinforced covers , class HV Type 1, flat, size 300mm x 180mm x 40mm, complete all as specified and as directed by Engr-in-charge.
S & F GI pipe light grade100 mm dia as protection to cable along the pole / across road crossing/through culvert/passing through ceiling/walls with necessary clamps-02 nos(Flat iron 50x6mm) with ,nuts and bolts for fixing on pole, complete all as specified and as directed by Engr-in-charge.
S & F GI pipe light grade 80 mm dia as protection to cable along the pole / across road crossing/through culvert/passing through ceiling/walls with necessary clamps-02 nos (Flat iron 50x6mm) with ,nuts and bolts for fixing on pole, complete all as specified and as directed by Engr-in-charge.
M&L for Disconnecting & Taking down/out unserviceable HT XLPE Cable 11 KV of size 50 Sqmm to 200 Sqmm 3 core of any description from Trenches, Floors, Walls, GI Pipes, etc., seggrating Serviceable Cables, Pipes, Bricks, etc. has been given to contractor as a schedule of credit and remaining serviceable cable (if any ) should be keep in Safe Custody for re-use and depositing to E/M Store Yard including transporation, complete all as specified and as directed by Engr-in-charge.
AMBIKA ENTERPRISES
Ajay Enterprises
NISHTHA BUILDERS
shiv shanker enterprises
Aman Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .