REPAIR TO EXTERNAL UTILITIES, PAINTING, FLOORING, ROOF SHEET ETC AT CHAKKIGAM, DRUGMULLA AND ZANGLI IN THE AOR OF GE 874 EWS.

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

M&L mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

M & L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M& L for Hard drawn steel wire fabric n exc 4 kg/sqm cut to lengths, bent to shape required including welded to iron frame wk of any size complete all as specified and directed.

M&L for preparing new surfaces of steel of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for providing 75 mm thick cement concrete type B- 1, 1:2:4 using 20mm graded aggregate as in sub base of floor complete all as specified and directed

M&L for providing, 25 mm thick Cement concrete type B- 0, 1:2:4 (20mm graded aggregate) as in sub base of floor complete all as specified and directed

M&L for coloured heavy duty Vitrified ceramic tiles 10 mm thick parking /exterior tiles polished, area of each tiles not exceeding 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for providing, 75mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, of any description including necessary scaffolding etc complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth with water proofing compound (without using extra lime or cement) including necessary scaffolding complete all as specified and directed.

Supply only Integral water proofing compound.

M&L for preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over chalk whiting, white or tinted complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for coloured Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L Glazed ceramic coloured tiles (Designer) in vertical surface of size 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 backing coat for fixing wall tiles complete all as specified and directed.

M&L Glazed ceramic coloured tiles (Designer) in vertical surface (rectangular/square) polished, area of each tiles exc .36 sqm but not exceeding 1 sqm 7/8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 backing coat for fixing wall tiles complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for Chequered cement concrete tiles (in any colour & shape/pattern) of size 20 cm x 20cm and 25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement & no pigment over 20 mm screed bed in CM 1:6 complete all as specified & directed.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding on edges , rubbing and polishing including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

S&F in repairs 15mm dia chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Wash basins, Vitreous China (flat back or angle back type) of size 550 x 400 mm, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S & F fixed in repair 15mm bore bib taps Standard of PTMT any colour high pressure, screwed both ends for iron pipe or for brass ferrule (min weight 15mm-90gms), complete all as specified and directed.

S & F fixed in repairs 15mm bore Pillar tap of PTMT any colour high pressure screwed for iron pipes or for union (min weight 15mm-110gms) complete all as specified and directed.

S & F fixed in repairs 15mm bore Stop valve of PTMT any colour high pressure, screwed both ends for iron pipe or for brass ferrule (min weight 15mm-90gms), screwed both ends for iron pipes or for union, complete all as specified and directed.

S&F in repairs 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm dia chromium plated fancy type Stop valves/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs stainless steel Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair 10 litres, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450m m complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat and cover complete all as specified and directed.

S&F in Repairs 15mm dia, Fancy type CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repairs Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union 125mm size complete all as specified and directed.

S&F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store complete all as specified and directed. Note:-Measured overall as fixed along the centre line over fittings and accessories.

S&F PVC (SWR) pipes110mm Dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 150mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bend 110mm dia Any radius complete all as specified and directed.

Dismantling old unserviceable PVC water tanks exc 500 & n exc 1000 ltrs capacity complete all as specified and directed.

S&F in repair rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 750 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210gms) complete all as specified and directed.

Supply & fixing 1000 liter capacity ISI marked double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including making inlet/outlet connection complete all as specified and directed.

S&F in repair rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210gms) complete all as specified and directed.

S&F in repair rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 250 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210gms) complete all as specified and directed.

S&F ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed.

S & F in repair gun-metal, globe or gate valves of 20mm thick, with iron wheel head, screwed both ends for iron pipe and fixed etc complete.

S&F PVC (SWR) 75mm outlet dia floor trap/Nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter, of doors and window, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each complete all as specified and directed.

M&L for resecuring or easing and adjusting the shutters without taking down in the same opening upto 2Sqm complete all as specified and directed

Taking down shutters exc 2 sqm each and refixing in the same opening including resecuring or easing and adjusting and also refixing builders hardware, cutting to size and fitting complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 75mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F Aluminium handles 100mm long, cast type, anodised complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed.

S&F Aluminium handles 150mm long, cast type, anodised complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts 200mm of extruded section and fixed

S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250 mm size complete all as specified and directed.

M&L 2nd class soft wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C-1 20mm graded stone aggregate as bed block to hold fast block and other similar works etc complete all as specified and directed.

S&F 35mm thick made of 2nd class soft wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick glazed and skeleton shutters 2nd class soft wood open rebated and prepared to receive gauze, wire netting etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20 (a) complete all as specified and directed.

S&F 30mm thick glazed and skeleton shutters for window & ventilator 2nd class soft wood open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.24 (b) complete all as specified and directed.

S&F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair. Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Sheet glass, 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for applying two coats of synthetic enamel on wood (ordinary tint) over one coat of pink primer over 10cm width or girth incl preparation of surface.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position for unframed/Framed work complete all as specified and directed.

M&L second class softwood as in scantling clean sawn fixed in position with nails, unframed work complete all as specified and directed.

M&L 6 mm thick Plywood, grade BWR, type BB, fixed with nails to timber frame work in wall/ceiling complete all as specified and directed.

M&L 6 mm thick one face decorative Plywood, grade BWR, type BB, fixed with nails to timber frame work in wall/ceiling complete all as specified and directed.

M&L 9 mm thick Plywood, grade BWR, type BB, fixed with nails to timber frame work in wall/ceiling complete all as specified and directed.

M&L 9 mm thick one face decorative Plywood, grade BWR, type BB, fixed with screws to timber frame work in wall/ceiling.

M&L 2nd class soft wood Plain fillets. Exc 3 n exc 6 Sqcm square, rectangular or triangular in section, clean sawn, secured with screw complete all as specified and directed.

S&F12 mm thick 2nd class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to frame with secret nails as in wall panelling including cornice and beading as required and applying two coat of varnish over a fillet coat of thin varnish after preparation of surface complete all as specified and directed.

S& F for WPC panelling of any pattern in wall and ceiling complete all as specified and directed Note: Sample to be approved by GE before execution of work.

Supply & Fixing in repair in position, 6 mm thick E board (classic) of size 610x610 mm as in false ceiling fixed with aluminum snap grid frame work of same size as aluminum Tee of size 25x25x1.50mm as main runner, 25x25x1.25 mm thick aluminium Tee as cross runner and aluminum angle of size 25x25x1.25mm at the perimeter including GI 3 mm adjustable suspender of required length of any description complete all as specified and directed.

M & L for 3mm thick ACP sheet panelling in ceiling/ wall Cladding plain of approved colour / shade to beam / column / slab in circular / rectangular shape including all off sets, bending and clits wherever required to give the required shape and shape and design and silicon filling the joints using water proofing sealant including suspension wire wherever required using and fabricating aluminium tubular hollow section 25mmx25mm frame work of size not exceeding 900mm c/c on existing MS pipe purlin / rafter / column to hold ACP cladding etc complete all as specified and directed.

M&L PVC panelling for wall/ceiling complete all as specified and as directed (as per sample kept in the office of AGE )

M&L 2nd class soft wood “khatambandh” (Kashmiri Art) in ceiling/wall over 12mm thick BWR plywood and scantling framework including cornices and beading as required and applying three coats of polish after preparation of the surface, complete all as specified and directed.

M&L Pergo tiles wooden mat finishes of size (1200x200x7-8 mm) laid over & including PVC foam 5 mm thick with SR adhesive over & including 50 micron polythene sheet complete all as specified and directed.

S&F in repair modular BWR ply wood vanity WHB with brass chromium plated pillar tap, waste coupling & waste pipe of any colour complete all as specified and as directed.

S&F of helical door spring including strip for movement of door complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including necessary scaffolding, upto four storey building including dismantling of any thickness and any pattern at any location and height, complete all as specified and directed. Note : Cost of scaffolding workk for fixing of roof sheet to be included in the unit rate quoted by tenderer.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in profiled to ridge ,water channel ,roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for Facia/Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment over 25 mm thick sand cushioning complete all as specified and directed.

M&L for providing, 50mm thick Cement concrete type C- 2, 1:3:6 (20mm graded aggregate) complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows, ventilators, Partitions with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed.

M&L Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified complete all as specified and directed.

S& F in repairs toilet paper holder chromium plated of premium quality complete all as specified and directed.

Supply and fixing in repairs of waste coupling of size 32/40mm of CP (half or full threaded) complete all as specified and directed.

Supply and fixing in repairs of waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.

S&F 5.5mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed

M&L for preparing the old plastered /un plastered surfaces of walls including cornices by brooming down or steel wire brushing scrapping down or steel wire brushing scrapping down smoke soot etc. and applying one coat of cement base paint on wall surface to give uniform and smooth surface including necessary scaffolding complete all as specified and directed.

M&L for preparing old painted wood or wood base surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparing old painted steel or roof surfaces and iron surfaces of any description over 10cm width and girth and apply one coat of synthetic enamel paint including necessary scaffolding, upto three storey building at any location and height complete all as specified and directed.

M&L for preparing the old plastered /un plastered surfaces of walls including cornices by brooming down or steel wire brushing scrapping down or steel wire brushing scrapping down smoke soot etc. and applying one coat of 1st quality acrylic distemper having VOC content less than 50 gms/litre, of approved manufacturer on wall surface to give uniform and smooth surface including necessary scaffolding complete all as specified and directed.

M&L for complete removal of existing treatment from walls/ceiling (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper, over and including a coat of 1 mm thick wall care putty with preparation of plastered surfaces complete all as specified and directed.

M&L for preparing old/new decorated plastered surfaces of wall including cornices, pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of synthetic enamel paint on wall surface in camouflage pattern/single shade of wall, including necessary scaffolding complete all as specified and directed.

M&L for Aluminium sliding three track window with powder coated aluminium (minimum thickness of powder coating 50 micron) frame of aluminium section 62.5mm x 37mm x 1.5mm thick with two glass shutters and one mosquito proofing shutters with but 0.56 mm nominal dia of wire and average width of aperture1.18mm having style and rails of aluminium section 47.62mm x 44.45mm x 1.5mm thick including joining cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handle etc., including 5.5 mm thick sheet glass wire netting fixed in repairs, complete all as specified and directed.

M&L for Aluminium sliding/Hung type with powder coated aluminium (minimum thickness of powder coating 50 micron) frame of aluminium section 62.5mm x 37mm x 1.5mm thick having style and rails of aluminium section 47.62mm x 44.45mm x 1.5mm thick including joining cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handle etc., including 5.5 mm thick sheet glass wire netting fixed in repairs, complete all as specified and directed.

M & L for 15mm thick toughned glass as in hinged doors with polished edges, conforming to IS 2553 (Part 1): 2018. Glass shall be factory-prepared with necessary cut-outs for hardware, and installed with approved patch fittings/floor spring/locks complete all as specified and directed

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply oil/glass putty for fixing glass only complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

S & F in repairs vitreous China squatting pan, Orissa pattern size 580 x440 mm white, with integral foot rests complete all as specified and directed.

Excavation in trenches n. exc 1.5 m wide & .exc 1.5 and not exc 3.00 m deep for foundation for shafts, wells, cesspits, manholes etc not exc 10 sqm on plan and getting cut in any type soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for foundations, filling and mass concrete complete all as specified and directed.

M&L returning filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

M&L for removal of excavated material to a distance not exceeding 50m and deposited where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for cutting into existing manholes for internal dia of pipe 150 mm dia pipe for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching complete all as specified and directed.

M&L Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

M&L for preparation of previously treated surfaces/old surface of wall and applying two coat cement base paint on old surface of wall complete all as specified and directed.

M&L 15mm thick cement plaster on external surface in CM 1:4 mixed with WPC 3% by weight of cement including finishing even & smooth complete all as specified and directed.

M&L Providing and fixing in repair concertina coil fencing with punched tape concertina coil 600 mm dia 10m openable length ( total length 90m) having 50 Nos rounds per 6 m length, up to 3.0m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tired with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed wire tape (R.B.T)/spring core (2.5 mm thick) wire of high tensile strength of 165kg/sq.mm with tape (0.52 mm thick 0 and weight 43.478 gm/metre (cost of M.S. angle,). Note :- CC Blocks shall be paid separately

M&L for random rubble masonry using sand stone uncoursed well bonded bedded and solidly hearted built in CM 1:4 complete all as specified and directed

M&L Hardcore of gauge (broken bricks) n exc 63mm deposited spread levelled in layers n exc 15 cm thick watered and rammed to a true surface with gauze broken boulder exc 90 cm complete all as specified and directed.

S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed.

Taking up or down 15mm dia GI steel tubing and connections complete all as specified and as directed.

Taking up or down 20mm dia GI steel tubing and connections, complete all as specified and as directed.

S&F GI tube 15 mm dia medium grade galvanized with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F GI tube 20 mm dia medium grade galvanized with all fittings laid in floors /wall etc. complete all as specified and as directed.

M&L for lagging to pipes 15mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil complete all as specified and directed.

M&L for Lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil complete all as specified and directed.

M&L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for 75mm thick plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as sub base or floor complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M/S SAJAA CONSTRUCTION COMAPNY (BID ID -3454280)

MS AKHLAQ ENTERPRISES (BID ID -3454122)

Bidder Name

M/S SAJAA CONSTRUCTION COMAPNY

GH MOHD SHAH AND CO

MS AKHLAQ ENTERPRISES