SPECIAL REPAIR TO PRIMARY SECTION, SECONDARY SECTION, HIGHER SECONDARY SECTION AND ADMINSTRATION SECTION OF KV NO. 1 SCHOOL ARMAPUR, KANPUR

Amount

Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, laying of pipes & cable etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in soft/loose soil including forming bottom surface complete all as specified and directed.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layer n.exc. 250 mm in any type of soil after the pipe laid & tested complete all as specified and directed.

Removing excavated surplus soil to a distance n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 m above the starting point all as specified and directed

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete of any description for laying of pipes / cables and making good to the disturbed surfaces to match with existing complete all as specified and directed. Note : Providing PCC work will be measured and paid seperately under relevant items.

Taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking off shutters from the frames) n.exc 1.50 Sqm each and removing from site complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc.4.00 sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description not exc 1 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing), and removing rubbish off the premises etc complete all as specified and directed.

Dismantling expanded metal weight not exceeding 4 Kg per Sqm, any thickness or mess, fixed with steel or wood fillets, if any complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M& L for taking down /scrapping out loose and weak mortar or concrete by chiseling wire brush or any other pre applied mortar to expose the reinforcement including cement plaster from any height of RCC ceiling complete at site including erection of necessary scaffolding upto required height to carryout the work smoothly all as specified and directed.

M&L for providing and fixing additional reinforcement of TMT bars 8mm dia and over cut to length bent to shape as required in places whatever necessary by welding to existing reinforcement etc complete all as specified and directed.

M&L for providing and fixing wire netting of mild steel wire mesh of size 25mmx25mm and 1.40mm dia fixed with tinned tacks of wire staples to exisiting old reinforcement whatever necessary in place of new reinforcement bars by welding for supporting the concrete including necessary scaffolding as required complete all as specified and directed.

M&L pressure shortcreting 20-40mm thick CM 1:3 to all affected area of RCC ceiling using 6mm aggregate downwards and including necessary scaffolding for the height from ground to bottom dome using polymer based shortcreating chemical @ 2% by weight of cement and finished the concrete surfaces at edges and corners andcomplete all as specified and directed. (NOTE:- Shortcreating /guniting at a height upto appex of ceiling)

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames or stone, concrete or brick surrounds, glazing with oil putty or fixed with beads complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection surface finished even and smooth without using extra cement of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 mtr mean radius, built in CM 1:4 complete all as specified & directed .

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:3 on ceiling of concrete surface and finished even and smooth with out using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Vitrified ceramic tiles 10mm thick (Light shade as approved by Engineer-in-Charge) (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Machine cut kota stone slab flooring 18-20 mm thick over and including 15mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 18-20 mm thick over and including 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 100 mm thick PCC type B-1, (1:2:4) using 20mm graded crushed stone aggregate fin-ished even & smooth without using extra cement. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

S&F pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of red oxide priming complete all as specified and directed.

M&L Second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed.

S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed

Demolition and breaking up drain pipe/rain water pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 100/110 mm internal dia of pipe complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore without ovel access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal of 110 mm bore of pipe complete all as specified and directed

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F 3 mm thick frosted glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F 200mm long alumunium anodised barrel tower bolts of extructed section complete all as specified and directed.

S&F 150mm long alumunium anodised barrel tower bolts of extructed section complete all as specified and directed.

S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250 mm length of bolt complete all as specified and directed.

S&F aluminium handles cast type anodised of 150 mm size complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel 75 mm long complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

S&F PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia etc complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity complete all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity complete all as specified and directed.

M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges type B-1 (1:2:4) using 20 mm graded crushed stone aggregate complete all as specified and directed.

S&F for pillar taps cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for 15mm bore dia of iron pipe complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia of pipe complete all as specified and directed.

S & F in repair vitreous china wash basin white flat back of size 550mmx400mm excluding taps,but including waste coupling ,waste pipe,chain and plug and porcelain stopper and brackets etc. complete as specified and directed.

S&F waste coupling of PTMT for 32 mm bore dia of pipe half or full threaded (minimum weight 45gms) complete all as specified and directed.

S&F in repair Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe)

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall care putty 1mm thick complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coats of wall care putty 1mm thick complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of weather proof paint over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coats of weather proof paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceilings and applying two coats of white wash complete all as specified and directed.

M&L applying two coats of plastic emulsion paint on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described including preparation of old surface complete all as specified and directed.

M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not exceeding 10 cm in width or girth when unconnected with other painting and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not exceeding 10 cm in width or girth when unconnected with other painting and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L cutting, rubbing and polishing ( mirror polish i.e full kota stone /marble polished ) and jointing and pointing with white cement slurry to match the shade including as per the local trade practice on the existing flooring and walling complete all as specified and directed.

Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling of size 605 x 605mm complete all as specified and directed.

S & F Hanger 6mm dia GI (upto 1200mm lenth) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 X 3mm size 60mm long complete all as specified and directed.

S&F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S&F stainless steel curtain rods of 20mm dia as in doors/ windows pelmets. with SS brackets fancy type including screws and other necessary fitting for fixing brackets SS Funnels for 20 mm dia dropry rods, fixed at each end of rods complete all as specified and directed.

S&F for 15mm bore dia of pipe angle cock cast copper alloy, with capstan head chromium plated screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, beddings urinals against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete as specified and directed.

S&F in repair Soap dish , chromium plated , complete all as specified and directed.

S&F in repair Toilet paper holder, chromium plated , complete all as specified and directed.

S&F in repair health faucet with 1 metre Stainless Steel tube and hook for water closet, pedastal pattern complete all as specified and directed.

M & L for chequered cement concrete tiles 30cmx30cmx25cm thick set and jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM(1:6) complete all as specified and directed.

Cutting holes through brick walls built, in cement mortar and making good in cement concrete (1:2:4) type B-1 as required, superficial area exc 400 sqcm but n’exc. 0.10 sqm, complete all as specified and directed.

S&F in repairs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate) complete all as specified and directed.

S&F cast iron floor trap 100 mm dia with CP grating including jointing to waste pipe with lead joint and fixed in cement concrete 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) complete all as specified and directed.

S & F in repair angular stop cock two way 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as specified and directed.

S & F pre-painted Galvalume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F pre-painted Galvalume aluminum zink coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins where connected to common rafters & running rails & guides for sliding doors; fixed with angle cleats or other connecting plates GDE Fe410-0 or Fe 310-O complete all as specified and directed.

S&F Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe410-0 or Fe 310-O complete all as specified and directed.

S&F in repair Towel rail 20mm dia, 60cm long brass chromium plated with brackets complete all as specified and directed.

Taking down wall panelling,wooden flooring and similar work complete all as specified and directed.

S & F 5mm thick plain/printed coloured PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, Insulated PVC wall Lining, and solid PVC partitions inclusive of Solvent cement at site complete as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.

M&L for PVC (SWR) pipes double socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed.

S&F stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed.

M&L Broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Dismantling asbestos cement (corrugated,semi-corrugated etc.) sheets in roof covering complete all as specified and directed .

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking down steel tubing and connection 20mm bore including cleaning for refixing or removing from site complete all as specified and directed.

Taking down steel tubing and connection 25mm bore including cleaning for refixing or removing from site complete all as specified and directed.

Taking up or down steel tubing & connection 50 mm bore including cleaning for refixing or removing from site complete all as specified and directed.

M & L for GI tubing medium grade 15 mm dia galvanised with all fitting laid in trenches or laid under floors, fixed to walls with and including MS clamp etc complete all as specified and directed.

M & L for GI tubing medium grade 20mm dia galvanised with all fitting laid in trenches or laid under floors, fixed to walls with and including MS clamp etc complete all as specified and directed.

M & L for GI tubing medium grade 25 mm dia galvanised with all fitting laid in trenches or laid under floors, fixed to walls with and including MS clamp etc complete all as specified and directed.

M & L for GI tubing medium grade 50 mm dia galvanised with all fitting laid in trenches or laid under floors, fixed to walls with and including MS clamp etc complete all as specified and directed.

Cutting of existing GI pipe line of size 80 mm dia and inseting new pipe line including all fittings complete all as specified & directed.

S & F of Gun-metal, globe or gate valves of 50 mm dia sizes with iron wheel head, screwed both ends for iron pipe or unions and fixed complete including taking out of old unserviceable gate valves of 50 mm dia sizes complete all as specified and directed.

S & F of Gun-metal, globe or gate valves of 25 mm dia sizes with iron wheel head, screwed both ends for iron pipe or unions and fixed complete including taking down of old unserviceable gate valves of 25 mm dia sizes complete all as specified and directed.

S & F of Gun-metal, globe or gate valves of 20 mm dia sizes with iron wheel head, screwed both ends for iron pipe or unions and fixed complete including taking down of old unserviceable gate valves of 20 mm dia sizes complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone agrregate) in foundation and filling in road cut surfaces complete all as specified and directed

Taking down old copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc.removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls floors etc complete all as specified and directed

Taking down fittings such as light fittings and ceiling fans carefully and shifting to store for keeping in safe custody and refixing the same to the location, after new point wiring has been completed and making good disturbed surfaces of walls floors etc complete all as specified and directed

M&L for point wiring complete for One light/Fan/Exhaust Fan/Bell point controlled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost

M&L for point wiring complete for one 5 Pin 5 Amp switch Socket outlet point controlled by one switch on independent board, with PVC insulated and unsheathed FRLSH CABLE 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall / roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost..

M&L for point wiring complete for one 5 Pin 5 Amp switch Socket outlet point controlled by one switch on same board, with PVC insulated and unsheathed FRLSH CABLE 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and MS conduit not less than 20 mm in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :-In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

M&L for point wiring complete for One calling bell point controlled by one way switches with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost

M&L for point wiring complete for one socket outlet 2 in 1, 5 and 15 Amp with PVC insulated and unsheathed, FRLSH cable 2.5 sqmm (nominal area), ISI marked, stranded copper conductor single core including ISI marked 20mm dia medium grade PVC conduit concealed in wall and MS conduit in roof/floor slab, pressed GI concealed terminal boxes not less than 1.6mm thick of required size and with top cover 3mm thick of plastic laminated sheets of required colour complete, including 2.5 Sqmm, FRLS cable PVC insulated unsheathed multi stranded copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories and all as specified. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

All as per item No 127 here in before but for one socket out let 2 in 1, 5 and 15 Amps or AC point with 4 Sqmm PVC copper conductor and provn of 4.0 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor complete all as specified and directed.

M&L for Point wiring complete for One light point controlled by one 5 Amps switch with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through and including rigid PVC conduit/ Casing caping on wall/ceiling with and including provision of MS box of suitable size with 3mm thick laminated hylam sheet cover for housing switch, socket, etc including provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories and all as specified. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

M&L for Point wiring complete for One socket out multi pin 5 Amps controlled by one switch on independant board with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through and including rigid PVC conduit/ Casing caping on wall/ceiling with and including provision of MS box of suitable size with 3mm thick laminated hylam sheet cover for housing switch, socket, etc incl provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories and all as specified. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

M&L for Point wiring complete for One socket out multi pin 5 Amps controlled by one switch on same board with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through and including rigid PVC conduit/ Casing caping on wall/ceiling with and including provision of MS box of suitable size with 3mm thick laminated hylam sheet cover for housing switch, socket, etc incl provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories and all as specified. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through and including medium grade PVC conduit concealed suitable size upto height of 2.5 mtr on wall and casing caping under ceiling upto length of 5 mtr on ceiling incl provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly for One Fan point controlled by one 05 Amps switch complete all as specified and directed.

M & L cutting chases, pinning in,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sun shadows, sheves lintels etc and cutting chases for concealed water tubing or concealed wiring etc and making good cutting n. exc 10 cm girth complete all as specified and directed.

S & F in replacement ceiling rose, 3 to 4 terminals 65x50mm, PVC/ poly-carbonate body, 240 Volt ISI marked complete all as specified and directed.

S&F modular switch flush type 6 Amp single pole one way, one module complete all as specified and directed.

S&F modular switch one way , flush type 15 Amp 240 volt complete, one module complete all as specified and directed.

S&F modular socket out let 3 Pin 6 Amp, flush type 240 Volt complete, 2 module complete all as specified and directed.

S&F Modular socket out let 2 in 1 , 3 pin 5 & 15 Amp , 240 volt, 2 module complete all as specified and directed.

S& F modular Electronic ceiling fan regulator step type, 120 W , 2 module step type complete all as specified and directed.

S & F modular white cover plate with frame 1 module complete all as specified and directed.

S & F modular white cover plate with frame 3 module complete all as specified and directed.

S & F modular white cover plate with frame 4 module complete all as specified and directed.

S & F modular white cover plate with frame 6 module complete all as specified and directed.

S & F modular white cover plate with frame 8 module complete all as specified and directed.

S & F modular metal flush box 1 module complete all as specified and directed.

S & F modular metal flush box 3 module complete all as specified and directed.

S & F modular metal flush box 4 module complete all as specified and directed.

S & F modular metal flush box 6 module complete all as specified and directed.

S & F modular metal flush box 8 module complete all as specified and directed.

Supply and fixing Modular Bell Push 6 amps one module complete all as specified and directed.

Supply and fixing in replacement electric bell, AC, 230 V, Single pole, multi music type complete all as specified and directed.

S & F in replacement Industrial socket single pole and enclosure with a two pin and earth plug complete with one single pole MCB 20Amp complete all as specified and directed.

S & F in replacement switch piano 5 Amps one way complete all as specified and directed.

S & F in replacement socket 6 Amps multi purpose flush type complete all as specified and directed.

S&F in replacement socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type complete all as specified and directed.

S&F in replacement switch piano, flush type single pole 15 Amps complete all as specified and directed.

Supply and fixing in replacement regulator electronic type 100 watts 5 step huming free operation complete all as specified and directed.

Supply and fixing in replcement MCB DB double door type single phase with common eath and neutral bus and 200 amps copper bus bars complet , 240 volts 12 way complete all as specified and directed.

Supply and fixing in replcement MCB DB double door type single phase with common eath and neutral bus and 200 amps copper bus bars complet , 240 volts, 08 way complete all as specified and directed.

Supply and fixing in replcement MCB DB double door type single phase with common eath and neutral bus and 200 amps copper bus bars complet , 240 volts, 04 way complete all as specified and directed.

Supply and fixing in repair TPN DB's 4 way vertical type 415 V, double door suitable for housing of 63 Amps MCCB as main incoming complete all as specified and directed.

Supply and fixing in repair TPN DB's 8 way vertical type 415 V, double door suitable for housing of 300 Amps MCCB as main incoming complete all as specified and directed.

S&F in replacement MCCB of capacity 63 Amps, fixed thermal and magnetic release, 4 Pole, 16 KA suitable to be fixed in 4 way TPN DB complete all as specified and directed.

S & F MCCB 300 Amps capacity, 4 pole, 36 KA, fixed thermal and magnetic release complete with extended terminals to be fixed in 8 way TPN DB complete all as specified and directed.

S & F suitable steel metal enclosure to accommodate MCCB 300 Amps capacity, 4 pole complete all as specified and directed.

S & F MCB SP 6-32 Amps, 10 KA, 'C' series complete all as specified and directed.

S & F MCB SP 40 Amps, , 10 KA, 'C' Series complete all as specified and directed.

S & F RCCB double pole 40 Amp, 30 mA for earth leakage protection complete all as specified and directed.

S & F MCB SPN 40 to 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S & F MCB SPN upto 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F MCB TP current carrying capacity of 25 to 63 Amp, 415V 10KA 'C' curve miniature circuit breaker (MCB) complete with connection testing and commissioning complete all as specified and directed.

S & F sub main wiring of size 16 sq mm cable of four runs alongwith earth wire of 16 sq mm single core (total 5 runs) of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor, conforming to IS-649 and drawn through and including PVC non metalic rigid conduit/ casing of suitable size concealed in wall/on ceiling and including all conduit/casing accessories etc and connecting terminal ends of suitable size including taking down old unserviceable aluminium sub main wiring complete all as specified and directed.

S & F sub main wiring of size 10 sq mm cable of four runs alongwith earth wire of 10 sq mm single core (total 5 runs) of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor, conforming to IS-649 and drawn through and including PVC non metalic rigid conduit/ casing of suitable size concealed in wall/on ceiling and including all conduit/casing accessories etc and connecting terminal ends of suitable size including taking down old unserviceable aluminium sub main wiring complete all as specified and directed.

S & F sub main wiring of size 6 sq mm cable of two runs alongwith earth wire of 6 sq mm single core (total 3 runs) of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor, conforming to IS-649 and drawn through and including PVC non metalic rigid conduit/ casing of suitable size concealed in wall/on ceiling and including all conduit/casing accessories etc and connecting terminal ends of suitable size including taking down old unserviceable aluminium sub main wiring complete all as specified and directed.

S & F sub main wiring of size 4 sq mm cable of two runs alongwith earth wire of 4 sq mm single core (total 3 runs) of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor, conforming to IS-649 and drawn through and including PVC non metalic rigid conduit/ casing of suitable size concealed in wall/on ceiling and including all conduit/casing accessories etc and connecting terminal ends of suitable size including taking down old unserviceable aluminium sub main wiring complete all as specified and directed.

S & F sub main wiring of size 2.5 sq mm cable of two runs alongwith earth wire of 2.5 sq mm single core (total 3 runs) of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor, conforming to IS-649 and drawn through and including PVC non metalic rigid conduit/ casing of suitable size concealed in wall/on ceiling and including all conduit/casing accessories etc and connecting terminal ends of suitable size including taking down old unserviceable aluminium sub main wiring complete all as specified and directed.

Taking out the existing unserviceable LT UG Cable of any size 2/3.5/4 core by disconnecting DB's / Poles / any description etc complete all as specified and directed.

Taking out the existing GI tubing of any size/grade complete all as specified and directed.

Supply, laying, testing and commissioning of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 150 sq mm 3.5 core (Main incomer cable) passing through pipe, in duct, on poles, in trenches including fixing hardware, clamps, making good the damaged surfaces etc, as required complete all as specified and directed

M&L Sand cushioning to U/G cable in layers of 23 cm thick (8 cm before laying the cable and 15 cm thick after laying the cable, punned thickness shall be measured) in trenches complete all as specified and directed. Note: - Only punned thickness shall be measured and paid.

Supply and laying sub class ‘B’ bricks old size of size 230mmx115mmx75 mm for protection to LT cable of 1100 V grade complete all as specified and directed.

M&L for 80 mm dia galvanised steel tubing, medium grade, with all necessary fittings and fixtures laid in trenches, fixed to walls, poles, under road/floor etc for cable protection complete all as specified and directed.

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x 6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level) with top edge of the plate not less than 1.50 M below normal ground level , con-nected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTE:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor complete all as specified and directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 4 mm dia galvanized iron wire complete all as specified and directed

Ashirwad Contractor and Supplier

SHYAMA CONSTRUCTION COMPANY

M/S SDS Construction Co.

B.K.ASSOCIATES