Civil Works for Creation of Facility for Cardiology Dept. at Ground Floor, PH-I, ILBS

Name of the tender: Civil Works for Creation of Facility for Cardiology Dept. at Ground Floor, PH-I, ILBS

Open Tender Enquiry No. ILBS/ 2026/ENG/01 Tender ID No 2026_ILBS_288855_1

Due for opening on: 08-04-2026

Name & Address of the Bidder:-

(Bidders should quote Delivered Duty Paid “destination price” i.e. at ILBS at D-1, Vasant Kunj, New Delhi inclusive of Customs duty, Insurance, forwarding charges, packaging and handling charges, third party expenses, Customs clearance charges, all statutory taxes i.e. GST etc. in the prescribed format only.)

The Price for Civil Works for Creation of Facility for Cardiology Dept. at Ground Floor, PH-I, ILBS

SI. No Particular of Items Unit Rate Quantity GST GST Total Amount (Rs.)

1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) :

1.1 For fixed portion

1.1.1 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 0 0

2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

2.1 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 0 0

3 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in- charge. Pre-laminated particle board with decorative lamination on both sides sqm. 0 0

4 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

4.1 With clear Float glass panes of 05 mm thickness (weight not less than 20 kg/sqm) sqm. 0 0

4.2 With Toughened glass panes of 05 mm thickness sqm. 0 0

5 Providing and fixing of frosted film for glass panes as per the Direction of Engineer-In-Charge sqft 0 0

6 Providing 2mm thick homogeneous PVC Vinyl flooring of approved make & quality with total weight 2800g/sqm polyurethane reinforced (PUR) abrasion group P: <0.15mm, residual identification approximately 0.3mm, caster wheel test qualified, dimensional stability 0.4% static electrical charge 2kv, impax sound reduction approximately +4db good resistance of scratch, slip, chemical and fire doesn't Favor in growth of bacteria no damage of furniture layer thickness 0.7mm cut resistant to heat <0.8mm, slip resistant R9u>0.30 on polished smooth base floor of terrazzo/granite/tile flooring of first grade quality, the rate shall include for cutting, fitting, fixing hot welding and cove former for skirting and making good as per the direction of Engineer-in charge. Sqmt 0 0

Total Amount (including GST)

Place:- New Delhi

Name & Address of the Bidder:-