SPL REPAIR TO SEWAGE LINE AND MANHOLES NEAR OR LIVING OF FD REGT, PROVN OF RCC OPEN DRAINAGE (APPROX 350 MTR) AT OR MD ACCN ZORAWAR MARG AND SPL REPAIR OF BLDG NO P-763 (OPS ROOM) OF 322 MED REGT AT ITARANA MIL STN ALWAR

Amount

Taking down chowkhat with shutter without taking off shutter from the frame n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat with shutter without taking off shutter from the frame exc 1.5 Sqm and not exc 4 Sqm eachcomplete all as specified and directed.

S&F aluminium powder coated sliding window made of the following specifications :- (Net outer size of window shall be measured. Following items are included in this unit rate.) (a) Provn of 03 track runners of size 92 x 31.75 x 1.10 mm. (b) Provn of glazed sliding shutters (02 Nos) of section 44 mm x 18 mm x 1.25 mm provided with 4 mm thick heat observing glass with suitable EPDM beading and locking clips arrangement. (c) Provn of gauged sliding shutter of size 44 mm x 18 mm x 1.25 mm using Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with suitable stainless screws .

S&F aluminium powder coated ventilators made of the following specifications :- (Net external size of ventilator shall be measured. Following items are included in this unit rate.) (a) Aluminium frame powder coated styles, bottom, top and middle rail of hollow section 50 mm x 25 mm x 1.80 mm thick. (b) Lower portion of ventilator shall be fixed with 4mm thick pin headed glass fixed with suitable aluminium beading clips and EPDM beading (rubber). (c) Upper portion shall be fixed with louver guides fixed with 4mm thick pinheaded glass with suitable EPDM beading incl suitable handle and clips. (d) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with suitable frame in upper panel.

S&F powder coated aluminium door anodised of approved colour( size of frame : 63.5mm x38.10mm x2mm thick & size of shutter : door vertical (style ) with gasket of size mmx45mmx45mmx 2mm thick, topp/bottom/middle rail of size 110mmx45mmx2mm, including S&F of 4.8 mm thick frosted glass with glazing clip, pvc track gasket ,EPDM rubber gasket on glass of weather tightening alongwith recessed type handle, hinges, mortic lock, door closer complete all as specified and directed.

S&F in repair door closer hydraulically regulated (aluminium extruded body) designation No.2 universal type sutable for door shutter of 851 to 1000mm width and of weight between 61 to 80 Kg complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:4 on stone masonry surfaces or on fair faces of brick masonry finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed.

M&L rendering 5mm thick in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on concrete surface etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair faces on stone/brick masonry including WPC @3% by weight of cement finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plasterd surface of wall and applying two coats of oil bound distemper white or tinted over and including 1mm thick Birla wall care putty complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying Finishing walls with Acrylic Smooth exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10sqm incl 1mm thick wall putty complete all as specified and directed.

M&L for preparation of newly plasterd surface of ceiling surface and applying three coats of white wash complete all as specified and directed

M&L for Complete removal of existing treatment (White wash, colour wash, cement base paint, OBD or any other treatment) of wall by brooming down on steel wire brushing scrapping down smoke soot moulds, moss and efflorescent salts and trading oil greasy spot etc and applying two coats of oil bound distmper over and incl 1mm thick wall Care Putty on walls up to 15M height complete all as specified and directed

M&L for Complete removal of existing treatment (White wash, colour wash, cement base paint, OBD or any other treatment) of wall by brooming down on steel wire brushing scrapping down smoke soot moulds, moss and efflorescent salts and trading oil greasy spot etc M&L for preparation of old plastered surfaces of walls and applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm incl 1mm thick wall putty complete all as specified and directed.

M&L for preparation of old surface of ceiling and applying two coats of white wash complete all as specified and directed

Dismantling wall and any type of ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness fixed to any type of frame including cover fillets complete all as specified and directed.

M&L for suspended false ceiling system using 4 mm thick 'E' Board ceiling tiles classic/ designer as approved by GE of size 595 x 595mm (as approved by GE) fixed with and including galvanized iron powder coated GI Grid system suspended from ceiling with provision of galvanized wire 4 mm dia with butterfly clips and wall taping screw i, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions, complete, all as directed and specified. (a) Size of grid - 600 x 600 mm. (b) Size of main Tee – 39 x 24x0.30mm (c) Size of cross Tee – 24X24x0.3mm (d) Size of wall angle – 24 x 24x0.4mm

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed colour PVC sheet & edges will be painted to match with printed sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

S&F 100mm size stainless steel butt hinges medium weight cold rolled complete all as specified & directed.

S&F Aluminum anodised, barrel tower bolts of extruded section and fixed 150 mm long complete all as specified & directed.

S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked complete all as specified & directed.

M&L for Vitrified Ceramic tiles in floor, dark (Double charged) shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including Screed bed of mortar 20mm thick for laying floor finishes in CM (1:6) including dismantling old tiles complete all as specified & directed.

M&L for Vitrified Ceramic tiles in skirting, dark shade (Double charge) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including rendering 15mm thick for laying floor finishes in CM (1:4) including dismantling old tiles complete all as specified & directed.

M&L non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white and coloured cement to match coloured tiles including Screed bed of mortar 15mm thick for laying floor finishes in CM (1:6) including dismantling old tiles complete all as specified & directed.

M&L for glazed ceramic colour tiles in vertical surface 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thick rendering in CM (1:4), including dismantling old tiles complete all as specified and directed.

S&F 15mm dia concealed galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings including cutting through wall floor etc including taking down old existing pipe complete all as specified & directed.

S&F 20mm dia galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings including cutting through wall floor etc including taking down old existing pipe complete all as specified & directed.

S&F in repairs vitreous china wash down water closet (Pedastal pattern) Single Piece WC With PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 360x705x705 mm, S Trap- 300 m 'white including seat cover and making good to floor complete all as specified and as directed. (Make : Prayag Cat No. ECS-WHT-851S300SPPSM or Equivalent Series)

S&F in repair table top vitreous china wash hand basin white colour of size 550mmx400mm fixed in granite slab etc including 32mm dia CP brass waste coupling fitting and union complete all as specified and as directed. (Make- Prayag Cat no-ECS-WHT-901 or Equivalent.)

S&F Bottle Trap with Fully Casted Body 32 mm with 190 mm and 125 mm Long Connecting Pipess Also available LE-773ML300X125 with 300 mm and 125 mm Long Connecting Pipes complete all as specified & directed. (Make- Prayag Cat No.ALE-773ML 190x125mm)

S&F high density polythelene pipe (HDPE) of 32mm, pressure rating 6 Kgf/cm2 fixed to ceiling, floor etc complete all as specified and directed

S&F in repair vitreous china urinal half stall type white excluding flushing cistern , but including CP urinal spreader, CP waste coupling and waste pipe complete all as specified and directed

S&F in repair Vitreous china urinal partition slab white of size 310x700 mm slabs terminating about 40cm above floor line complete all as specified & directed.

S&F in repairs, 15mm bore angle valve chromium plated, fancy type complete all as specified and directed. (Make : Prayag Cat No. 8010 or Equivalent Series)

S&F in repairs 15mm bore long body bib tap cast copper cromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule complete all as specified & directed. (Make : Prayag Cat No.ORB-105037 or Equivalent )

S&F in repair 15 mm bore swan neck centre hole basin mixer Single Lever without Popup Waste with 450mm Long Braided Hoses complete all as specified and directed. (Make-Prayag Cat ORB-105011B or equivalent)

S&F in repair CP Soap dish all as specified and directed. (Make-Prayag Cat No. AEC-1133 or equivalent)

S&F in repair soap dispensor with glass bottle complete all as specified & directed. Make-Jaquar Cat No ACN-CHR-1135N or equivalent.

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.

S&F in repair single tubular towel rail of brass chromium plated all as specified & directed. (Make : Prayag Cat No AEC-1111N or Equivalent).

S&F in repair toilet paper holder complete all as specified & directed. (Make : Prayag Cat No AEC-1151N or Equivalent).

S&F health faucet (Brass) with 1Mtr long tube & hook complete all as specified & directed. (Make- Prayag Cat No.BEA-41)

S&F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including 20mm float valve 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of old PVC water tank complete all as specified and as directed.

S&F in repair 20mm bore Gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified & directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, incl taking down old existing pipe complete all as specified and directed.

S&F PVC (SWR) pipes of 110 mm nominal outside diameter double socketed in any length with rubber ring joints including all fittings/fixtures fixed on wall or in trenches or in floor incl taking down old existing pipe complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F Granite (of any type ) work 20mm thick (table rubbed and polished) in steps, jambs, pillars ,window cills,cooking platforms and like (including cutting for fixing of WHB, Sink etc) in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl dismantling old stone slab complete all as specified and directed

M&L for taking down old existing roof treatment and cleaning the roof surface by wire brushing and watering and applying a coat of cement slurry at the rate of 3Kg/Sqm on the roof surface complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on roof slab with mixed with water proofing compound @ 3% by wt of cement, finished the surface even and smooth in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane finished complete all as specified & directed. Note :- (Polymeric membrane and WPC shall be meausred and paid seperately here-in-after)

Supply only water proofing compound complete all as specified & directed.

M&L for water proofing treatement to RCC roof slab including parapet comprising of following course of treatement/specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.00 Kgs/Sqm over and including bitumenious hot bitumen 85/25 & uniformly embeded in during manufacturing process shall only be used & joints shall be sealed properly by torch application . side overlap should be 75mm and end shall be 100mm. For parapets, membrane shall be taken to a height of minimum 20cm and then inserted inside parapet in groove. The same shall be finished by a membrane flashing

S&F in repair stainless steel (Grade 304, 18 Guage) drapery rod of 25 mm inner dia (in length as directed ) of approved colour with & including matching finials at both ends and pair of SS brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm c/c all as specified and directed.

Demolition cement concrete (unreinforcement) in ground floor and paving n.exc 15cm thickness (below or above ground level) & removal complete all rubbish materials as complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) as in levelling coarse of floors and roof complete all as specified and directed.

M&L 50mm thick, cement concrete, type C-2, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection and surface to be finished even and smooth without using extra cement complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified & directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete set in CM 1:6 including demolition olf kerb stone complete all as specified and as directed.

M&L for factory made machine pressed precast concrete interlocking paver block coloured glossy finished of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-30 grade with grey cement and no pigment over and including 25 mm thick sand cusion complete all as specified and directed

M&L 75mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggrgate) as in sub base of / pavings / path etc complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil complete all as specified & directed.

Removing Excavated soils not exc 50 M and depositing where directed at a level not exc1.5 M above the starting point complete all as specified & directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm in soft/loose soil complete all as specified & directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed.

M&L RCC M-25 Design Mix using 20mm graded stone aggregate in foundation including footing, plinth beam, base for column, etc complete all as specified and directed.

M&L RCC M-25 Design Mix using 20mm graded stone aggregate in for slabs sopported on walls ,beams and columns in floos ,roofs etc complete all as specified and directed.

M&L RCC M-25 Design Mix using 20mm graded stone aggregate in for Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresse etc complete all as specified and directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter on rough finished surfaces complete all as specified & directed.

Form work to side of concrete foundation , footing , bases of columns, raft and raft beams, sides and soffits (If any) of foundation and plinth beams and similar work, vertical or to batter on rough finished surface complete all as specified & directed.

Form work as in suspended slab, such as roof slabs, floor slabs, landings and similar work, not exceeding 20mm thick(Horizonal or sloping) on fair finished surfaces complete all as specified & directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) complete all as specified & directed.

M&L rendering 5mm thick in cement 1:3 on fair faces of concrete surfance finished even and smooth without using extra cement complete all as specified and directed.

M&L for Mild steel TMT bars 8 to 10mm dia bars and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified & directed.

M&L for Plain Cement Concrete Type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in copings including necessary form work complete all as specified & directed.

Demolition of cement concrete (reinforced) in landing slab ,chullah hoods ,manhole covers , Roofs ,Floors, beams, stair case, landing, chajja and similar suspended work complete all as specified & directed.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars & precast concrete masonry etc complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in cills, coping steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm ht kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating complete all as specified & directed.

M&L for PCC (1:4:8) type D-2 (Using 40mm stone aggregate) as in foundation concrete complete all as specified & directed.

M&L plain cement concrete 1:2:4 type B0 in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified & directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over the one coat of primer complete all as specified and directed.

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified & directed.

Demolition and breaking up drain pipes (Salt glazed stone ware, AC, or Reinforced concrete) or 150mm dia set in cement mortar including PCC bed to drain pipe, packing under & haunching against the sides of drain pipes all as specified & directed by Engineer-in-charge.

All as per srl item No 88.00 but 300 mm bore.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete including forms work, moulds mitred/stopped ends etc complete all as specified.

M&L for 150mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed, complete all as specified and directed.

M&L 300mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars complete all as specified & directed.

S&F for 75mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed.

M&L for Concrete bed for 150mmdia drain pipes laid to falls including packing under and haunching against the sides of pipe after they are laid & tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone agg.) complete all as specified and directed.

All as per srl item no 94.00 but 300 mm bore.

M&L for cutting into existing manholes / Septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 100mm bore pipe complete all as specified & directed.

Excavation in trenches n. exc 1.50m in width and exc 1.50m in depth and n. exc 3m in depth for foundation, sewage line, manholes etc as well as n exc 10 Sqmm on plan area and getting out in soft/loose soil all as specified and directed.

M/s Laxmi Enterprises (BID ID -3506098)

M/s R P Enterprises (BID ID -3505372)

M/s ASK Enterprises (BID ID -3506006)

M/S JINDAL ENTERPRISES (BID ID -3505552)