ADDITION ALTERATION TO BLDG NO EW 14 EW 15 TOILET BLOCK AND SPECIAL REPAIRS TO BLDG NO EW 16 BLDG NO 10A COOK HOUSE OF 32 BIHAR BN NCC AT MUZAFFARPUR AND OLD TRANSIT CAMP BARAUNI UNDER GE DANAPUR CANTT

Amount

Demolition of brick work built in cement mortar complete all as specified and directed.

M & L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and as directed.

M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) as in kitchen platform, shelves & chajjas etc including necessary form work complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressmummers, lintels over 1.5 m span complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 mm dia and over upto and including 8 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

Dismantling of floor, wall, roof tiles including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified & directed.

M&L 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate), as in levelling course for floor finished even & fair Complete all as spesified and directed .

M & L for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed (1:4) etc complete all as specified and directed.

M&L for Glazed ceramic tiles coloured in vertical surface 300x200x7mm thick / 450x300x7mm /350x275x7mm set and jointed in cement slurry and pointed in white or coloured cement to match over and including incl 10 mm thick rendering in CM 1:4complete all as specified and directed.

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

M & L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick on fair faces of brick /concrete/ as on ceiling surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified & directed .

Supply only water proofing compound (liquid), ISI marked.

M & L Preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for Preparation of old painted surfaces of wall, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified and directed.

M&L for applying 2 mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on old plastered wall surface complete all as specified and directed.

M&L for preparation of newly plastered surface of wall & concrete and applying 2 mm thick wall care putty in two layers complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat primer complete all as specified and directed.

M&L for applying 1mm thick Birla / JK Putty in on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on ceiling on old surfaces complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.

S&F steel windows with side hung shutters incl projecting type hinges with one No MS flat iron 25x3 mm of appx 200mm length and two nos MS Tower bolt 150mm long and one peg stay on each leaf complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters incl projecting type hinges with one No MS flat iron 25x3 mm of appx 200mm length and two nos MS Tower bolt 150mm long and one peg stay on each leaf complete without glazing bars, dovetailed or welded complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed.

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (b) complete all as specified and directed.

S & F in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves complete all as specified and directed.

S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S & F aluminium alloy anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy size 300 mm long complete all as specified and directed.

S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F in repair mild steel conduit curtain rod with PVC coating fancy type curtain rod 20 mm dia of any colour as approved complete all as specified and directed.

S&F mild steel Bracket and bulb with PVC coating fancy type for curtain rod 20 mm dia of any colour as approved complete all as specified and directed.

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed by Engr-in-charge

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

S&F Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 125mmX60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed.

S&F Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 105mmX60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed.

S&F Mild steel framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0 complete all as specified and directed.

M & L for 20 - 25 mm thick machine Cuddappa stone slab as on cooking plateform/floor over and including 20 mm thick screed bed or bedding layer in Cement Mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed.

S&F in repair vitreous china WHB size 550mmx400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed.

S&F in repair pillar tap 15 mm bore fancy type chromium plated, cast copper alloy, screwed down, high pressure, with capstan head, with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900mm x 750mm x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange complete all as specified and directed.

S&F in repair Soap dish, vitreous China white, approximate size 160x160x90mm and approved by EIC complete all as directed

S&F in repair bib tap 15mm cast copper alloy chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc fancy type complete all as specified and directed.

S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement 75 mm dia etc complete.

M & L for Post construction Antitermite Treatment of soil under existing floors using emulsion @ one ltr per hole , 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 ( 1 cement : 2 coarse sand ) to match the existing floors complete all as specified and directed.

M & L for Post construction Antitermite Along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 ltr per linear meter including drilling and plugging holes etc in apron complete all as specified and directed.

S & F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M & L PCC 1:2:4 type B0 (using 12.50mm graded stone aggregates) as in back filling of pressed steel frames and similar works inclduing necessry form work as required complete all as specified and directed.

Taking up or down steel tubing & connections of pipe 15mm dia complete all as specified & directed

Taking up or down steel tubing & connections of pipe 20mm dia complete all as specified & directed

Supply and laying of 16 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as specified.

Supply and laying of 20 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as specified.

S & F in repair rotational moulded polyethylene water storage tank (Three layer) of capacity 500 litrs (Cylindrical vertical with closed top) hoisted and fixed on position all as specified in SSR Pt I complete all as specified & directed.

S & F of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 142 gram) complete all as specified and directed.

S & F in repair of 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Cutting chases in brick wall, etc for concealed water tubing ,etc & making good in CM 1:3 , cutting not exc 10 cm girth complete all as specified & directed.

S&F in repair 600mm long PVC connection of size 15 mm with PTMT nuts etc complete all as specified & directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including incl Screed bed or bedding layer of Cement Mortar (1:6), 20 mm thick for laying floor finishes, necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M &L for machine cut kota stone slab 20-25 mm thick as in skirting, riser, steps over cement mortar laid and jointed with grey cement cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 15mm thick plaster in CM 1:4 all as specified and directed.

Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S & F 28 to 30 mm(stiles) Factory Made Solid PVC Moulded door shutter with particle board core , with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawings as given in SSR part - II (2020 print) on serial page No. 147 complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated etc. ) sheets in roof covering complete all as specified & directed.

S & F Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /ridge/cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L Preparing old wooden surfaces exceeding 10Cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling wall or ceiling boards including frame work (fibre, pulp insulation etc) any thickness & at any height incl cover fillet complete all as specified and directed.

M&L False ceiling of armstrong with aluminium laminated coating on reverse side, sound absorbing of size 60cm x 60 cms, 4mm thick arm gypsum coloured with perforations supported on mild steel powder coated snap grid frame work with supporting hangers comprising GI wire 4 mm dia with size of grid 605 x 605 mm consisting of main and cross tee complete all as per manufacturer instructions and as directed by Engr-in-Charge complete all as specified & directed.

M&L Cutting holes into or through brick walls built in cement mortar/cement lime mortar superficial area n.exc. 150 Sq. cm and making good in cement mortar (1:3) or PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate ) as required.

M&L for mild steel Roof Trusses (framed trussed purlins ,crane gantries , rails and fastenings and heavy brackets framing (beam tee, angle ,channel or flat sections) including distance piece ,cleats etc.e all as specified & directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3. complete all as specified and directed.

M & L for sand filling under floors or in foundations, laid in layers n exc 15 cm thick, spread levelled including watering and consolidation as required complete all as specified and directed.

M&L old size brick work with sub class 'B' bricks laid flat in floors laid in dry complete all as specified and directed.

M&L for 100mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in sub base of floor finished even and fair Complete all as spesified and directed

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate),as in coping including necessary form work complete all as specified & directed.

M&L Chequered cement concrete tiles (rubber moulded prepainted, glossy, coloured ) 20 cm x 20 cm x 20-22 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 20 mm thick screed bed or bedding of mortar CM 1:4 complete all as specified & directed.

S & F 15mm bore tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors or trench etc complete all as specified and directed.

S & F 20mm bore tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors or trench etc complete all as specified and directed.

S&F in replacement of cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete all as specified and directed.make Prayag or equvalent make as approved by AO

S&F in repairs PVC connection 15 mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed.

S&F in repair angle cock 15 mm bore fancy type cast copper alloy chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

Roughing surface of old concrete by picking, sweeping, cleaning & washing down with water to remove dust etc. complete

M & L for 10 mm thick screed bed in cement mortar 1:4 with WPC @ 200 ml per bag of cement or as per manufacturer's instruction on roof surface and finishing the surface even and smooth without using extra cement complete all as specified and directed. NOTE :- WPC shall be measured and paid saperatly.

M&L for 25 mm average thickness PCC 1:2:4 type B-0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as spd and directed,

M&L brushing neat cement slurry with 3 kg of cement per square menter complete all as specified as directed.

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete.

M & L Preparing new plastered surfaces of wall and applying three coats of white wash etc complete all as specified and directed.

M&L for two coats of white washing on new surfaces in ceiling incl preperation all as directed by EIC

S & F Steel ventilator with top hung shutter including, hinges, peg stay, complete all as spesified and directed

S & F factory made solid Panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top and bottom rail; panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, all as per specification and drawing complete all as specified and directed.

M&L for hard core of broken bricks gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface complete as specified and directed.

M&L 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate), as in floor finished even & fair Complete all as spesified and directed .

S&F in repair PVC low level flushing cistern 10 ltr capacity including bracket fixed to wall & PVC high density tube 32 mm dia flush pipe complete all as specified & directed.

S&F in repair chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for WC including nut/washer complete.

S&F chromium plated toilet paper holder with flap complete all as specified and directed.

S/F in repair 15 mm dia Stop valves, cast copper alloy chromium plated fancy type, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed

S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specified and directed.

Taking down PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 110/100/75 mm dia pipe complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm dia. complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

M & L PVC(SWR) bend of 110 mm dia of any radius etc complete all as specified and directed.

M & L PVC(SWR) Tee of 110 mm dia etc complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's with MCB and making good the disturbed surfaces of walls complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls complete all as specified and directed.

M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1.6mm thick anodised pressed steel sunken box covered with 3mm thick hylum sheet for mounting switches, sockets, fan regulators etc for the following complete all as specified and directed.

One light/fan bell point controlled by one switch complete all as specified & directed

One 5 Amps socket out let point controlled by one switch on same board with other switches.

One 5 Amps socket out let point controlled by one switch on independent board

All as per item No 121.00 above but wiring with 2.5 sq mm single core copper conductor FRLS multistranded for one socket out let 15/16 amps point on the independent board.

S&F, Switch Piano, flush type, single pole, one way, 5 Amps, 240 Volt grade, ISI marked complete all as specified and directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed.

Supply and fixing switch piano flush button single pole one way 15 amps, 230 Volts complete all as specified and as directed.

S & F socket outlet flush type multipurpose 2 in 1 , 6 pin 5 and 15 Amp, 230 volts complete all as specified & directed.

S&F ceiling rose surface bakelite 63.5mm dia three terminals fixed, complete all as specified & directed.

Supply & fixing batten / angular fitting complete all as specified and directed.

Supply & fixing of 9 watt LED bulb complete all as specified and directed.

Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.

Supply and fixing double door SPN DB's eight way of powder coated DB's suitable for MCB's fitted with bus bar , neutral link , earth bar and Din ral as per existing finishing completeall as spd and directed.

Supply and fixing MCB SPN 5 to 40 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge.

S&F MCB SP of capacity 5 - 40 Amps 240 volts, 10 KA breaking capacity 'C' type incl connection complete all as specified & directed.

S&F LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size including 1 No tube 18/20 Wall as specified. Make- Crompton Greaves, Model No: DMLN1LT8-16 or equivalent model of Bajaj/Surya/ Havells Cat No: REGALBATTENT8UPTO1X22WDSBSWH+CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of make specified.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 6.0 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit 20mm dia including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

M & L Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead wire protected by GI pipe 20 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete.

M & L for preparation of newly plastered surfaces of ceiling and applying 1mm thick wall care putty including preparati of new surface complete all as specified and directed

S&F in repair chromium plated single laver wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and directed

M&L PCC 1:4:8 type D-2 (40mm graded stone agg) in fdn, sub base & mass concrete complete all as specified and directed.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit 20mm dia including PVC insulated unsheathed 2.50 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

RAJ AND SONS

MANISH KUMAR

M/S SAROJ KUMAR SINGH

M/S PRAVIN ENTERPRISES

MS BIJAY KUMAR AND SONS

M/S ANAND MOHAN ENTERPRISES

M/s Mukesh and company