REPAIR/MAINTENANCE OF UG SUMPS, OH RESERVOIRS WATER SUPPLY PIPE LINE, RAISING MAINS ,DISTRIBUTION CONTROL SYSTEM AND ALLIED WORKS AT SITE K HILL UNDER GE (AF) THANE

Amount

Supply & Fixing of Single Phase Electric Actuator suitable for 150mm. dia. Butterfly valve with disc material of CI with nylon coating, hand wheel for manual operation, Pressure rating of 10 kg/sq cm and having 02 nos. limit switches for Open/Close condition, valve position indicator. Make: Marsh/Emtork/Rotork

Supply & Fixing of Electric Motor for Actuator suitable for 80mm. dia. Butterfly valve. Make: ABB/BCH/CROMPTON/KIRLOSKAR ELECTRIC/SIEMENS

Supply & Fixing of Electric Motor for Actuator suitable for 100mm. dia. Butterfly valve. Make: ABB/BCH/CROMPTON/KIRLOSKAR ELECTRIC/SIEMENS

Supply & Fixing of Electric Motor for Actuator suitable for 150mm. dia. Butterfly valve. Make: ABB/BCH/CROMPTON/KIRLOSKAR ELECTRIC/SIEMENS

Supply & Fixing of Limit Switch for Actuator suitable for 80/100/150mm. dia. Butterfly valve.

Supply & Fixing of Capacitor for Actuator suitable for 80/100/150mm. dia. Butterfly valve.

Supply & Fixing of Resistor for Actuator suitable for 80/100/150mm. dia. Butterfly valve.

Supply & Fixing of Hand Wheel for Actuator suitable for 80/100/150mm. dia. Butterfly valve.

Supply & Fixing of Magnetic Level Sensor. Make: Yogitech/Mahalaxmi/Techsolution

Supply & Fixing of Water Level Controller (WLC) relay card (05 Level) Make: ME/Sai Electrical or Equivalent

Supply & Fixing of SMPS - 24V DC/5 A Make: Telemecanique/NHP/L & T

Supply & Fixing of Butterfly Valve gear operated CI of size - 80mm. dia. Aquaseal, Wafer Type, PN-10 Make: L & T/KIRLOSKAR/LEADER/VENUS/AUDCO

Supply & Fixing of Butterfly Valve gear operated CI of size - 100mm. dia. Aquaseal, Wafer Type, PN-10 Make: L & T/KIRLOSKAR/LEADER/VENUS/AUDCO

Supply & Fixing of Butterfly Valve gear operated CI of size - 150mm. dia. Aquaseal, Wafer Type, PN-10 Make: L & T/KIRLOSKAR/LEADER/VENUS/AUDCO

Supply & Fixing Flexible cable 5 core 0.5 sq mm. dia,1100 volt PVC insulated and sheathed with bore annealed copper conductor as per IS:694-1990 for sensor connection. Make: HAVELLS/L&T/NICCO/POLYCAB/RR KABEL LTD/FINOLEX

Supply & Fixing Flexible cable 2 core 1.5 sq mm. dia,1100 volt PVC insulated and sheathed with bore annealed copper conductor as per IS:694-1990 for sensor connection. Make: HAVELLS/L&T/NICCO/POLYCAB/RR KABEL LTD/FINOLEX

Supply & Fixing Flexible cable 4 core 1.5 sq mm. dia,1100 volt PVC insulated and sheathed with bore annealed copper conductor as per IS:694-1990 for sensor connection. Make: HAVELLS/L&T/NICCO/POLYCAB/RR KABEL LTD/FINOLEX

Supply & Fixing Flexible cable 6core 1.5 sq mm. dia,1100 volt PVC insulated and sheathed with bore annealed copper conductor as per IS:694-1990 for sensor connection. Make: HAVELLS/L&T/NICCO/POLYCAB/RR KABEL LTD/FINOLEX

Supply & Fix ,in repair, of Single Phase Preventor Model :VSP D2 Make - Minilec

Supply & Fix ,in repair, of Relay with base - 4 C/O, 240V Make : LEONE / IDEC

Supply & Fix ,in repair, of Relay with base – 4 C/O, 24 V D.C. Make : LEONE / IDEC

Supply & Fix ,in repair, of LED Indicators of Colour : Red / Yellow / Green /Blue Make : ESBEE / TEKNIC

Supply & Fix ,in repair, of Water Level Controller Make : SPLASH

Supply & Fix ,in repair, of Push Button with LED Indicator - 240V A.C. Colour : Red / Yellow / Green Make : ESBEE / TEKNIC

Supply & Fix ,in repair, of Coil for Solenoid Valve - 15mm / 10mm 230 V

Supply & Fix ,in repair, of Magnetic Level Switch – RDS/Mahalaxmi/Crystal

Supply & Fix ,in repair, of Pressure Switch 0 – 10 kg/sq.cm.Indfos/Danfoss

Supply & Fix ,in repair, of Pressure Gauge – Fiebig/ Manometer

Supply & Fix ,in repair, of M.S. Spiral Gear for gear box of actuator for 75 mm dia. Butterfly valve

Supply & Fix ,in repair, of M.S. Spiral Gear for gear box of actuator for 150 mm dia. Butterfly valve

Supply & Fix ,in repair, of M.S. Sector Gear for gear box of actuator for 75mm dia. Butterfly valve

Supply & Fix ,in repair, of M.S. Sector Gear for gear box of actuator for 100/150 mm dia. Butterfly valve

Supply & Fix ,in repair, of Capacitor for Actuator suitable for 75 / 150 mm dia Butterfly Valve

Supply & Fix ,in repair, of Hand Wheel for Actuator suitable for 75 / 150mm dia Butterfly Valve

Supply & Fix ,in repair, of Limit Switch for Actuator suitable for 75 / 150 / mm dia Butterfly Valve

Supply & Fix ,in repair, of Cast Aluminum Top Cover for Actuator suitable for 75 / 150mm dia Butterfly Valve

Supply & Fix ,in repair, of 5 pair 0.5mm dia. armoured communication cable

Supply & Fix ,in repair, of 6 Core 1.5sq.mm. dia. armoured cable

Equipment and Labour for Calibration and testing of PLC realy for various mode of operation for water supply and set the repaly all as per direction .

Supply and fix, reverse osmosis membrans capacity 1000LPM

Supply and fix, reverse osmosis carbon filter

Supply and fix, reverse osmosis micron cartridge filter

Supply & fix ,in repair, of bourden type water pressure guage 96 mm dia having range of 0 to 10 Kg per Square cm.

Supply & fix ,in repair, of bourden type vaccum pressure guage 96 mm dia having range of 0 to 01 Kg per Square cm.

Supply & fix ,in repair, of bourden type chlorine pressure guage 96 mm dia having range of 0 to 16 Kg per Square cm.

Supply& fix ,in repair, of non return valve with spring for injector assembly.

Supply & fix ,in repair, of flexible rubber / PVC hose pipe hevy duty of size 25mm internal dia

Supply & fix ,in repair, of regulator for chloronome plant of suitable size.

Supply& fix ,in repair, of filter assembly complete including accessories i.e. copper tubing flaro nut 'O' ring etc suitable for wall mounted gas feeder.

Disconnections suction and discharge connection of centrifugal pump discharge capacity 250 GPM with head 30 mtr motor capacity 15HP capacity. lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.

Disconnecting Monoblock pump set 7.5 HP capacity from suction/delivery line. lifting and removing from its existing foundation (inside/outside building) , dismantling carefully the pump and motor completely checking and segregating serviceable and unserviceable parts, cleaning/washing and servicing the serviceable parts by approved method, replacing unsv parts,(new parts required to be measured and paid seperately in respective schedule of item) reassembling the pump completely. Dismantling , cutting and removing the burnt windings from motor, rewinding with existing size/gauge with super enameled/copper conductor and other approved insulating materials, heating, drying including varnishing, overhauling .Reassembling the pump and motor, including painting the pump and MS channel with two coats of synthetic enamel paint incl marking of SM, MES or Ser No. installing monoblock pump to its existing foundation, commissioning, connecting up and testing complete all as directed. Make : Crompton greaves

Disconnecting Monoblock pump set 3 HP capacity from suction/delivery line. lifting and removing from its existing foundation (inside/outside building) , dismantling carefully the pump and motor completely checking and segregating serviceable and unserviceable parts, cleaning/washing and servicing the serviceable parts by approved method, replacing unsv parts,(new parts required to be measured and paid seperately in respective schedule of item) reassembling the pump completely. Dismantling , cutting and removing the burnt windings from motor, rewinding with existing size/gauge with super enameled/copper conductor and other approved insulating materials, heating, drying including varnishing, overhauling .Reassembling the pump and motor, including painting the pump and MS channel with two coats of synthetic enamel paint incl marking of SM, MES or Ser No. installing monoblock pump to its existing foundation, commissioning, connecting up and testing complete all as directed. Make : Crompton greaves

Dismantling , cutting and removing the burnt windings from the Induction motor of capacity 15 HP, rewinding with existing size/gauge of super enameled/copper conductor and other approved insulating materials, heating, drying including varnishing, overhauling, reassembling the motor, installing, commissioning, testing and connecting up complete all as directed.

Disconnecting from electric connection carefully the motor from penal board and lifting the submersible pump from bore well including all accessories like column pipe, submersible pump etc and removing the same to the location (inside/ outside building) complete all as directed .

Dismantling the submersible pump assembly 3 HP completely, checking and segregating serviceable/unserviceable parts, cleaning serviceable parts thoroughly by approved method, replacement of parts by new ones (new parts will be measured and paid in respective items mentined below) like suction cage pump/shaft, discharge case assembly, bowl assembly, etc where necessary, re-assembling the pump completely lowering the pump alongwith all accessories to the existing location, , commissioning, testing and connecting up complete Submersible pump as directed .Make : Crompton greaves.

Dismantling the submersible pump assembly 5 HP completely, checking and segregating serviceable/unserviceable parts, cleaning serviceable parts thoroughly by approved method, replacement of parts by new ones (new parts will be measured and paid in respective items mentined below) like suction cage pump/shaft, discharge case assembly, bowl assembly, etc where necessary, re-assembling the pump completely lowering the pump alongwith all accessories to the existing location, , commissioning, testing and connecting up complete Submersible pump as directed .Make : Crompton greaves.

Dismantling , cutting and removing the burnt windings from the Submersible motor of capacity-3 HP, rewinding with existing size/gauge of super enameled insulated copper conductor and other approved insulating materials, heating, drying including varnishing, overhauling, reassembling the motor, installing, commissioning, testing and connecting up complete all as directed.

Dismantling , cutting and removing the burnt windings from the Submersible motor of capacity-5 HP, rewinding with existing size/gauge of super enameled insulated copper conductor and other approved insulating materials, heating, drying including varnishing, overhauling, reassembling the motor, installing, commissioning, testing and connecting up complete all as directed.

Supply only Ball bearing No-6306

Supply only Ball bearing No-6307

Supply only Ball bearing No-6309

Supply only Ball bearing No-6305

Supply only Motor terminal box of sizes.

Supply only Shaft key of sizes suitable for motor shaft.

Supply only coupling bolt made with stainless steel with nut and washer suitable for Pump and motor .Make -As per sample

Supply only Pump Shaft sleeve DE/NDEsuitable for 15 HP pump .

Supply only Lantern ring suitable for 15 HP pump .

Supply only Stuffing box bush suitable for 15 HP pump .

Supply only Air vent suitable for 15 HP pump

Supply only Impeller Key suitable for 15 HP pump .

Supply only Coupling Key suitablefor 15 HP pump .

Supply only Bolt for upper and lower half casing suitable for DSM pump .

Supply only Taper pin with washers and nuts for lower and upper half casing Coupling Key suitablefor DSM pump .Make Kirloskar.

Supply the Draing plug for casing suitablefor 15 HP pump .

Supply the Paper packing between lower and upper casing Key suitablefor DSM pump .Make Kirloskar.

Supply only O ring for shast sleev suitablefor 15 HP pump .

Supply only Cylindrical roller bearing SKF N-311 0r euivalent.

Supply only Bearing lock nut suitable for 15 HP pump .

Supply only Bearing Housing DE suitable for 15 HP pump .

Supply only Bearing Housing NDE suitable for15 HP pump .

Supply only Oil seal suitable for 15 HP pump .

Supply only Inner stage Ring suitablefor Sumersible pump .

Supply only Coil for starter, Model No : SS-90047, 400/440 Volt, 50 Hz.

Supply only Coil for starter, Model No : ML-2/3

Supply only Contractor for starter ML-2, 32 Amps 440 Volt, AC

Supply only Timer, 415 Volt, 50 Hz,

S&F ,in repair, DOL starter suitable for 7.5 HP, 3 Phase, 415 Volts motor including testing and commissioning all as directed

S&F ,in repair, DOL starter suitable for 3HP, 3 Phase, 415 Volts motor including testing and commissioning all as directed

Supply and fix ,in repair, of rotational moulded polyethylene water storage tanks of capacity 1000Ltr, triple layered ( cylindrical vertical with closed tap) hoisted and fixed in all position.

Supply and fix ,in repair, of rotational moulded polyethylene water storage tanks of capacity 500Ltr triple layered ( cylindrical vertical with closed tap) hoisted and fixed in all position.

S&F ,in repair, brass foot valve of size 80mm dia

Disconnecting and opening of pressure type water filter cylinder at type Cap 5000 GPH and removal of o'c eisting filter media and depositing not exceeding 50 mtr, complete including scrapping/cleaning of surface in side of filter removing mould, moss foreign materials scale and dirt etc. and refilling filter media all as specified and directed. (Note : Filter media, nozzle etc will be measured and paid separately).

M&L for two coats of black bituminius paint lead free in side the water filter suitable for drinking water including preparation of surface of filter of 14000 GPH capacity all as directed.

M&L for two coats of synthetic enamel paint after preparation of surface of external side of pressure filter capacity 14000 GPH or all as directed.

Supply and laying of uniform grading all as specified (sand in dry condition shall be spread in level ground and 10% of total volumn of sand shall be deducted for voids) of size 1.0 to 0.05 mm,

Supply only gravel (Single) size 6 mm to 3 mm of size, cleaned washed all as specified.

Supply only gravel (Single) size 15 mm to 6 mm of size, cleaned washed all as specified.

Supply only gravel (Single) size 25 mm to 15 mm of size, cleaned washed all as specified.

Supply only gravel (Single) size 40 mm to 25 mm of size, cleaned washed all as specified.

Relaying pebbles (Single) of size 25-40mm .NOTE : Gravel duly cleaned and washed shall be stacked on level ground measurement shall be taken before used no deduction shall be made for voids.

Supply only PVC strainer nozzles push/thread type suitable for sountain all as per specified and directed.

S&F diaphragm valve cost iron body heavy duty 150 mm dia conforming to IS-2312 (Part-I) 1964 flanged type with all connected item including taking down old one including rubber gasket as specified and directed,.

S&F diaphragm valve cost iron body heavy duty 100 mm dia conforming to IS-2312 (Part-I) 1964 flanged type with all connected item including taking down old one including rubber gasket as specified and directed,.

Taking up or down steel galvanized/PPR water tubing of size 40/50 mm dia with all necessary fittings complete from walls / floor or trenches including cleaning for refixing or remval to store all as directed.

All as per items no 107.00 here in before but for 25mm dia.

All as per items no 107.00 here in before but for 20 mm dia.

All as per items no 107.00 here in before but for 63 mm dia.

Supply and fixing 3-Layer PP-R (Polypropylene random copolymer) pipes of size 25mm internal dia suitable for SDR 7.4 &SDR 11UV stablished and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls,ceilling or floors etc all as directed .

All as per items No 108.00 here in before but for 20 mm dia.

All as per items No 108.00 here in before but for 40 mm dia.

All as per items No 108.00 here in before but for 50 mm dia.

All as per items No 108.00 here in before but for 63 mm dia.

Supply and fix ,in repair, PP-R Gate valves of size 50mm bore pipe (brass insert) as per requirement of site all as directed.

All as per items No 109.00 here in before but for 40 mm dia.

All as per items No 109.00 here in before but for 25 mm dia.

All as per items No 109.00 here in before but for 20 mm dia.

All as per items No 109.00 here in before but for 63 mm dia.

Repairing, servicing , cleaning and checking chlorine dozing pump and connected dosign motor, service tank, preparation tank complete system for coloration under water pumping installation and kept it in 100% serviceable condition at all times in And carry out under mention works at AF station thane. (a) Testing ,Checking and setting if required duty cycle for operation of cholorin dozing pump and set cycles as per dosing rate 10 ltr/hr. (b) cleaning the preparation tank of capacity 100ltrs. (c)cleaning the water inlet line. (d)cleaning the outlet with strainer. (e)cleaning the drainage system. (f) cleaning the conical bottom for sludge deposition. (g) cleaning the pot hole with cover. (h) cleaning the level gauge. (i)Servincing the agitator 120 watt 900 rpm 1 phase flange mounted motor with plastic shaft and impellerof Magnetic Level Sensor i.e. Cleaning, checking for wear and tear, checking electrical termination and testing as directed . (j) The serviceing to be done in each month. (k) Necessary spare for repair to be measured and paid seperately in respective items.

Supply only Pump tube for dozing pump..

Supply only suction/discharge tubng (3/8") white for dozing pump.

Supply only injection check valve(3/8' connection) for dozing pump.

Supply only foot valve (clay weight-3/8" connection) for dozing pump.

Supply only duck bill for dozing pump.

Supply only motor 220 v 50 Hz for dozing pump.

Supply only ferrul for dozing pump.

Supply only pump head complet for dozing pump.

Supply only feed rate controller for dozing pump..

Supply only valve "O" ring for dozing pump.

Supply only rotor assembly with bearing bracket etc for dozing pump.

Supply only coil for dozing pump.

Supply only roller asssembly for dozing pump..

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in soft/loose soil for laying of Water Main/Pipe and forming surfaces to required foundation etc,complete all as specified and as directed by Engr-in-charge.

Returning/filling in including spreading/ levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil including surplus soil by providing Heaps along the route of pipe line, complete all as specified and as directed by Engr-in-charge.

Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtrs above the starting point complete all as specified and as directed by Engr-in-charge.

Vinod Enterprises

sapana enterprises

Safe Construction Co.

Bidder Name

Safe Construction Co.