Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹12.7 LAccepted-AOC | ₹12.7 L | 1 | Accepted-AOC ok |
| 2 | Rejected-Technical 24A LAJPAT NAGAR NEAR BUS STAND YAMUNA NAGAR | YAMUNANAGAR | HARYANA | 133103 | - | - | Rejected-Technical Disqualified |
Tender Value
₹13.0 L
EMD Value
₹26,000
Closing Date
21 May 2026, 2:00 pmClosed
Executive Engineer, MID Bokaro.
o/o EE Minor Irrigation Division, Bokaro Camp 2 Bokaro.
Installation of Open Gym in Kodwatand Panchayat F type Colony Ground under Block Gomia Bokaro.
2026_WRD_114110_1
WRD/MID/BOKARO/F2-05/2026-27 (2nd call)(Gr no. 04)
Open Tender
Civil Works
Percentage
90 days
GOMIA
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,500
₹26,000
5 Jun 2026
16 May 2026
23 May 2026
16 May 2026
21 May 2026
16 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | CHEST PRESS SINGLE MAIN FRAME: 100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65 MM.
ARM HANDLE & REST SEAT FRAME: 25/32 NB JINDAL GI PIPE HAVING WALL THICKNESS OF 2.65 MM.
HANDLE COVER : TPEE INJECTION MOULDED.
BACK & REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 100 NB, 32 NB AND 25 NB. BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 57,000 | ₹57,000 |
| 2 | ROWER MAIN FRAME: RECT. PIPE 80 X 40 JINDAL MS PIPES HAVING WALL THICKNESS OF 2 MM.
ARM HANDLE & LEG FRAME: 25/50 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.
\HANDLE COVER :TPEE INJECTION MOULDED.
BACK & REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.
FASTENERS: USED FOR FIXING THE BASE FRAME.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 50 NB.
BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 43,000 | ₹43,000 |
| 3 | AIR RIDER MAIN FRAME:100 NB AND 65 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65 MM.
ARM HANDLE & REST SEAT & LEG FRAME: 25/32 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.
HANDLE COVER :TPEE INJECTION MOULDED.
REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 65 NB AND 32 NB.
BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 43,000 | ₹43,000 |
| 4 | IR WALKER - SINGLE
IR WALKER - SINGLE MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.
ARM HANDLE & LEG FRAME: 25/32NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.
FOOT REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 100 NB.
BEARING KIT: BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 52,000 | ₹52,000 |
| 5 | LEG PRESS CUM TWISTER MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65 MM.
ARM HANDLE & REST SEAT & LEG FRAME: 25/32 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.
HANDLE COVER :TPEE INJECTION MOULDED.
BACK & REST & TWISTER SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 100 NB, 32 NB AND 25 NB. BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 52,000 | ₹52,000 |
| 6 | ELLIPTICAL CROSS TRAINNER MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65 MM.
ARM HANDLE & FOOT REST FRAME: 25/32 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.
HANDLE COVER :TPEE INJECTION MOULDED.
FOOT REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 100 NB, 32 NB AND 25 NB. BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 53,000 | ₹53,000 |
| 7 | BIG SHOULDER WHEEL MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.
ARM HANDLE : 32/20 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.
HANDLE : HANDLE BEARING GRIP.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 100NB.
BEARING KIT: BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 49,000 | ₹49,000 |
| 8 | CROSS SKIER MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.
ARM HANDLE & FOOT REST FRAME: 25/32/40 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.
HANDLE COVER :TPEE INJECTION MOULDED.
FOOT REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 100NB, 40NB.
BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED | 1 | no | 52,000 | ₹52,000 |
| 9 | SURFBOARD MAIN FRAME: 100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.
ARM HANDLE & FOOT REST FRAME: 32 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.
HANDLE COVER :TPEE INJECTION MOULDED.
FOOT REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 100NB, 32NB.
BEARING KIT: BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 54,000 | ₹54,000 |
| 10 | LEG EXTENSION MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.
ARM HANDLE & REST SEAT FRAME: 32/50 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.
BACK & REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 32NB AND 25NB.
BEARING KIT: BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 39,000 | ₹39,000 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_154134.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
TenderDocumentGrno04OpenGymnit05.pdf
Tender Documents • 1.53 MB
BOQ_154134.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].