WBHD/EE/ED-II/e-NIQ-105/23-24

Amount

Supply & installation of feeder pillar box of size 1200 x 900 x 350 mm (L x W x H) made from 16 SWG CRCA sheet having door, base plate & Top cover. The frame for mounting Main Switch & Starter will be fabricated by 40 mm x 5 mm MS flat. It will have two nos. railway type locking arrangement and two nos. hinges for each door. The pillar box should have two nos. earthing terminals and will be painted by one coat of red oxide primer followed by two coats of synthetic enamel paint. The box should be installed on brick foundation by sand,cement morter with neat plustering on all side.The height of tne foundation will be at least 2 ft. from GL. After digging soil, making base by CC morter etc. as needed. All interconnections must be connected by approved make copper wire.

The pillar box should contain the following accessories : a) 32 A TPN SFU (L&T) - 1 no as incoming

b) 32 A TPN SFU (L&T) - 2 nos as outgoing

c) 63 A 4 bar Al BBC Chamber - 1 no

d) MK-1 FASD starter 9-14 A (L&T) SS96254 - 1 no

e) Godrej Navtal Lock, 5 levers, with 3 keys

f) Danger Board of size : 8" x 6"

g) RYB LED Indicating lamp-3nos

h) 2 A slide lock fuse with fuse link-3nos

i) 30/5A CT for Ammeter- 3 nos.

Supply and Delivery of 3 ph. 415 V. 5 H.P. 50 Hz. submersible Pump Motor Set with 3" out let head 19-60 mtrs (Make-KSB, Model No-CORA 18C/20G+UMAl 100-5.5/22

Lowering the another Submursible Pump-Motor set with G.I.coloum Pipe after making necessary arrengement for lowering the same with Co's own tools and tackles.

S & F of 80mm. dia. G.I Column pipe Make: (TATA-M.) length 3 Mtr . Having with cutting threading including 4" G.I Socket(Zoloto)

S & F round type M.S. Well cover plate including cutting 50 mm dia holes in middle for passing column pipe 1 no. 40 mm dia hole incl. welding 1 no socket in corner for entry of flat cable

S & F of 50 mm dia 400 mm long M.S. holding clamp for column pipe and pump including double nuts and bolts with washer also painting.

S & F 4 sq. mm. 3 core flat PVC coated copper submersible Motor cable (make - KEI/ Currency/Finolex)

Cost for jointing the 3 core submersible flat cable including S/F water proof jointing materials.

Supply and Fixing 80 mm/50 mm/ 25 mm dia G.I. Pipe (TATA-M) complete with all accessories in U.G. trench / on wall as per G.S. i) 80mm dia in u.g.trench.

40 mm dia. On wall

40 mm dia. On Underground Trench

S/F G.I. Fittings incl. Cost of all jointing materials as per G.S. a) G.I. Bend i) 80mm dia

b) G.I. Nipple i) 80 mm dia

ii) 40 mm dia

c) G.I Union i) 80 mm dia

ii) 40 mm dia

d) G.I Elbow i) 80mm dia

ii) 40 mm dia

e) G.I Socket i) 80 mm dia

ii) 40 mm dia

S/F 80mm dia G.I. Flange ( Zoloto)

S/F 80 mm X 50 mm Reducing socket (Zoloto)

S & F rubber insertion cloth between flange

S & F of nuts & bots with washer.

S/F of 80 mm dia Plug (Zoloto)

S&F of 80 mm dia GM Non-return Valve including jointing materials.(Leader/Zoloto)

S&F of 80 mm dia Full Way Valve including jointing materials. (Leader/ZOLOTO)

S&F of 50 mm dia Full Way Valve including jointing materials. (Leader/ZOLOTO)

Making presure gausge arrangement including S & F 100 mm dia presure G.M. valve and G.I. fitting complete. (approved make)

Cutting big hole through 10" wall & mending good the same after work

Removing the tube well cap from top face of new tube well by Chiseling.

Construction of brick piller approx size (10" x 10" x 36") height incl. plastering neat cement finishing for supporting the delivery pipe line as per direction of EIC

S/F header assembly fabricated with 100 mm dia G.I. Pipe (TATA-M ) of length 2 mtr.( approx) welded with both end. The header assembly. duly welded with 4 Nos G.I. Nipples 50 mm dia as outgoing and 2 nos 50 mm dia G.I. nipple as incomer incl provision for fixing of pressure meter painting the header assembly with two coats of approved paint over one coat of RO primer as per direction of EIC

Add G.S.T 18% on aggregate amount of BOQ item No 1.00 to 23.00

Add LW Cess 1% on aggregate amount of BOQ item No 1.00 to 23.00 (after add G.S.T 18 %)

GENUINE ENGINEERING WORKS

Allied Concern