Installation Of Nameplates At Various Locations And Display Of Rules And Regulations Outside Garden In W-18

Steel work in built up M.S. tubular section (round, square or rectangular Hollowtubeetc.) trusses/frameworketc./railingworketc. cludingcutting,hoistingfixinginpositio nandapplyingaprimingcoat ofapprovedsteelprimer, weldedandboltedi ncludingspecialshaped washers etc. complete. Hot finished welded type tubes

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with any section made of 1.60mm or 1.25mmthickM.S. Sheet, joints mitred and welded and grinded finish withprofiles required size with 15x3mm lugs 10cm long embedded in cement concreteM-10(NominalMixwith 20mmmaximumsizeofstoneaggregate) blocks 15x10x10cmorwith oodenplugsandscrewsorrawlplugsands crewsorwithfixingclips orwithboltsandnutsasrequired including fixingof necessarybutt hinges and screws andapplyingapriming coat of approvedsteel primers. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Painting Steelworkwith DeluxeMultiSurface Paint togiveaneven shade. [email protected]/1 Osqmoveranundercoat of primer applied @ 0.80 ltr/10 sqm of approved brand or manufacture

Providing and fixing of Retro- 20 Reflectorised cautionary, mandatory and informatory sign as per IRC:67 made Class B Type IV of high intensity grade sheeting vide Section 801.3 of the specifications,2 mm thick aluminium sheeting, 3 mm/4 mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of minimum 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The sign

Providing and fixing acp 4 material sheet for welcome gate as per engineer in charge

Providing and fixing acrylic 2 letters with lighting work complete asper engneer incharge