REPAIR TO WALL PENELLING, ROOF SHEET, FALSE CEILING, WOODEN FLOORING AT NURLA AND COMPREHENSIVE MISC BR REPAIR SUCH AS TILING, PLASTER, PCC FLOORING AT UPPER AND LOWER AREAS AT NIMU UNDER AGE I NIMU

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings and wall complete all as specified and directed by Engineer-in-Charge.

Supply and fix 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed by Engineer-in-Charge.

All as per item No 02 here-in-before but plain Galvanised, mild steel sheeting in ridges, hips, valley gutters complete all as specified and directed by Engineer-in-Charge.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

All as per item No 04 here-in-before but plain PPGI sheet complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed by Engineer-in-Charge.

Supply and fix Roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance piece, cleats etc Fe 410-W (Gde - E - 250) Quality 'A' complete all as specified and directed by Engineer-in-Charge.

Material and labour applying two coat of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd complete all as specified and directed by Engineer-in-Charge.

Material and labour applying two coat of synthetic enamel painting to old surfaces steel based exc. 10 cm width/girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge.

Supply and fix 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls complete all as specified and directed by Engineer-in-Charge.

All as per item No 11 here-in-before but in ceiling complete all as specified and directed by Engineer-in-Charge.

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work complete all as specified and directed by Engineer-in-Charge.

M & L Plain fillets. exc. 13 and n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed by Engineer-in-Charge.

All as per item No 14 here in before but exc 3 & n.exc 6 Sq cm in bullnosed, splayed, chamfered or rounded on one or both edges or face as in beading complete all as specified and directed by Engineer-in-Charge.

Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate ) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description complete all as specified and directed by Engineer-in-Charge.

Material and labour for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for Rendering 12mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour preparing new plastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed by Engineer-in-Charge.

Material and labour preparing new plastered surfaces of walls and applying two coat OBD on walls complete all as specified and directed by Engineer-in-Charge.

Material and labour preparing new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.

Material and labour preparing old plastered surfaces of walls and applying single coats of white wash on walls complete all as specified and directed by Engineer-in-Charge.

Material and labour preparing old plastered surfaces of walls and applying single coat OBD on walls complete all as specified and directed by Engineer-in-Charge.

Material and labour preparing old plastered surfaces of walls and applying single coat of cement base paint complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Supply and fix Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n. exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick sreed bedding layer in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

All as per item No 02 here-in before but area of each tile exc 0.11 sqm but n. exc 0.18 sqm, complete all as specified and directed by Engineer-in-Charge.

Material and labour for 25mm thick Cement concrete (1:2:4) type B0 (using 12.5mm graded aggregate) as in sub-base in floor finishes complete all as specified and directed by Engineer-in-Charge.

Supply and fix glazed coloured ceramic tiles 350X250X7mm/ 450X350X7mm thick as in vertical surface such as skirting, dado, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles incl 10mm thick plastering in CM 1:3 complete all as specified and directed by Engineer-in-Charge.

Material and labour for Vitrified ceramic (Light Shade) tiles 10mm thick (square/rectangular) polished, area of each tiles n.exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed with CM(1:4) 15mm thick for laying floor tiles complete all as specified and directed by Engineer-in-Charge.

Dismantling stone slabs and tiles of any description or thickness in floors approns etc, laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge.

Material and labour machine cut kota stone slab flooring 20-25mm thick over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shed of the slab incl rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Material and labour machine cut Granite slab flooring 20mm thick over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shed of the slab incl rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Rendering 10mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation of new plastered surface of wall and applying two coat of oil emulsion distemper (OBD) over a coat of alkali primer and 1mm thick wall care putty complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation of new plastered surface of wall and applying two coat of cement base paint incl curing over a coat of chalk whiting complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75mm thick Cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub-base in floor finishes complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75mm thick Cement concrete (1:2:4) type B2 (using 40mm graded crushed stone aggregate) as in Plinth proction complete all as specified and directed by Engineer-in-Charge.

Material and labour for 40mm thick Cement concrete, type B1 1:2:4 (using 20 mm crushed graded aggregate) as in floor and finish surfaces even and smooth with using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for Chequered cement concrete tiles 20cm x 20cm x25mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment in floors over screed bed or bedding layer of mortar 15mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Providing and laying Laminate wooden flooring (Grade AC3 or AC3+ laminates) 6 mm to 12 mm thick, having core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer, complete all as specified and directed by Engineer-in-Charge.

Demolition of Matting or wooden flooring, single or double any type including, bamboo framing or bamboo supports, cover fillets, if any complete all as specified and directed by Engineer-in-Charge.

CHHIRPON BUILDERS (BID ID -3400401)