Construction of New Marriage Hall at Pamban in ward no 85 zone 4

Amount

Dismantling, clearing away and carefully stackingmaterials useful for reuse for any thickness of walls Brick / stone masonry in Cement mortar walls under 3 m high

Dismantling reinforced cement concrete

Removing the Exisiting AC Sheet and Steel Angles

Drilling of Pile foundation anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers) including construction of mud pit

Earth work excavation in all kinds of soil except hard rock requiring blasting inclusive of shoring, strutting and bailing out water wherever ecessary refilling the sides of foundation with excavated earth in layer of 15 mm thick well ammed and consolidated depositing the surplus earth within compound, clearing and leveling the site with initial lead of 10m etc., and lift of 2m etc., complete.

Supplying and filling in foundation and basement with filling Quarry Dust in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and filling in foundation and basement Filling well graval in layers of 15cm thick well rammed and consolidated including watering complying with std. Specification etc, complete.

Plain cement concrete in 1:4:8 (one cement four sand and eight aggregates) with 40mm gauge hard broken granite jelly for foundation including consolidation and dewatering for foundation wherever necessary etc., complete.

Supplying and erecting shuttering with necessary supports for plain surface such as RCC boxing side slab, and similar, RCC slabs with all cross bracings etc., complete in all floors of any height (The retrieved materials should be taken back by the contractor). The payment for centering shall be given after the concrete is laid. (vertical Portion only)

Supplying and erecting shuttering with necessary supports for plinth beam with all cross bracings etc., Complete (RCC Column footing plinth beam and lintel side) using steel plate and angles, S.I. No. 155 - 10 M2

Supplying and erecting Steel centering for size and softest support for plain surface such as reinforced cement slap rectangular beams tee or L beams lintels bed blocks stair and landing slap landing beams, beams canopy etc., comp. in all any height (The retrieved materials should be taken back by the contractor). ( Bottom Only )

Supplying fabricating and placing in position of MS grills for reinforcement rate including the cost of steel for all works (the rate to include cost of binding wire also)

Reinforce Cement concrete 1: 1 ½ : 3 (One cement one and half sand and three aggregates) with 20mm gauge machine broken gauge hard broken granite chips including curing and finishing etc., complete for R.C.C. item excluding the cost of reinforcement grills in position and centering shuttering etc.

Brick work in CM 1:5 (one cement & five sand)using II class ground moulded bricks of size 9"X 4 3/8" X 2 3/4" including finishing, curing ,etc., complete complying with standard specification - 100CFT For Basement

Brick work in CM 1:5 (one cement & five sand)using II class ground moulded bricks of size 9"X 4 3/8" X 2 3/4" including finishing, curing ,etc., complete complying with standard specification - 100CFT Super Structure in Ground Floor..

Plastering with cement mortar 1:3, 10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Dadooring the sides of wall with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, uality and colour in all floors over abase layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid with out any air gap in the tiles neatly and fixing in position as per standard specifications

Paving the floor with design Anti skirt ceramic tiles (colour and shade as directed) of size 305mmx305mmx6mm in all floors over abase layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement Colour

Supplying and fixing UPVC (un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mmx58mm and sgutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi rubber (black colour) covered with over all the edges of frame and shutter the shutter will be providded with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging stroms and should have key lockable action. security protective hinges, strong locking systems and as per size for areesting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the xecutive Engineer before use on work

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt,etccomplete and including necessary plaster of paris, putty, wherever requiredetc,complete as per standard specification. - 10 sq.m.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m.

Supplying & delivery of fixing HDPE tank of 2000 it capacity as per IS 1207/1996 including oading&unloading transpoting & labour charges and fixing GI pipes & specials for pipe connections works including cutting threading and fixing charges etc., complete

Supplying and fixing in position white glazed European Water closet of best quality and approved make with 100mm 'P' os 'S" trap with double flapped rigit PVC seat cover with CP brass hinges with 12.5 liters PVC Low lwvwl flusing tank with all internal fittings etc., complete complying with standard specifications, labor inclusive of fixing low lvl flushing tank

Supplying and fixing in position Indian water closet of size 580X440mm, white glazed earthenware of approved quality with 'P' trap or 'S' trap confirming to IS:2556-PartXII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes / PVC pipes by dismandling brick masonry, reinforced cement concretero of / floor slab and making good the disturbed portion to original condition with out leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Add GST 18%

S SANJAY GANDHI (BID ID -1477460)