Provn of certain sanctioned Special Repair, Revenue and Minor work at

Amount

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 Complete all as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for

M&L 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and smooth with out using extra cement

Taking down cement plaster on brick work or concrete surfaces incl racking out joints all as specified.

M&L for 15mm thick Rendering in CM 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc complete all as specified and directed. Note: WPC shall be paid separately.

M & L applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, complete all as specified and as directed.

M&L for 15mm thick Rendering in CM 1:6on brick work or concrete surfaces with finished even and smooth etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying threecoats of white wash complete all as specified and directed by Engr-in-Charge

M&L RCC 1:2:4 type B1 using 20mm stone aggregate as in beams, lintels complete as all specifeid and directed

M&L for TMT bars 6mm to 8mm dia cut to length bend to shape as req including crancking bending spirally for hoping of columns hooking and binding with and incl mild steel wires (annealed) not less than 0.9mm dia otr screwing with clips quality coinfirming Fe-310-0 or Fe-410-0 all as specifed and directed incl drilling to cement surface for fixing of reinforcement in position al as specified

M&L, 5mm dia and over upto and incl 10mm dia stirrups, spacers and binders compl all as specified

Dismantiling mild steel work in roof purilin

Dismatiiling asbestors cement sheet in roof Covering

M&l Mild steel rolled section Fe 410-W (Gde-E-250) Quality a as in main and cross beams, hip and jack rafters puilins where connected to common rafters and running rails and guided for sliding door fixed with angle cleats or other connecting plates.

S&F pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of an colour having tenslile strength of 550 Mpa as in roof covering clading to wall and two currugated side coverlap fixed with self taping screws as specified.( Make : SAIL, TATA, JINDAL, Bhushan)

Taking down chowkats or framed with shutter with out taking of shutters from the frame area not exc 1.50 sqm each..

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening all as specfied and directed by Eng-In_Charge (MAKE : Rajshree, Dura Plast / Fenesta)

S &F factory made solid Panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings(MAKE : Rajashree, Dura Plast/ Fenesta)

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long.

Supply and fix steel ventilators fixed type with glazing bars etc complete all as specified and directed by EIC.

S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty all as specified.( Make : Saint Gobbin/Modi Guard/Triveni)

S&F in repairs for stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts incl leaping wooden.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer all as specified and directed by Engineer-in-Charge.( Make : Berger, Asian and Jonson and Nicholson)

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm. (Make : Jaguar, Parko, Cera & Parryware)

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm. (Make : Jaguar, Parko, Cera and Parryware)

Supply and fix in repairs for vitreous china ware wash basin white, flat back with pedestal size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete (Make : Cera, Parryware, Hindware)

Supply and fix in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low level of Make 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc complete.(Make : Cera, Parryware, Hindware)

S&F 20mm dia aluminium chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified.(Make: Jaguar, CERA or equivalent to ISI,)

S&F in repairs shower rose 100mm with cp arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm).(Make : Jaguar, Parko, Cera, Parryware)

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises

M&L for glazed ceramic coloured tiles in vertical surface 450 x 300 x 8-9 mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement plaster (1:4) complete all as directed by Engineer-in-Charge(Make : Kajaria, H&R Johnson, Somany)

M/L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as directed by Engineer-in-Charge. (Make : Kajaria, H&R Johnson, Somany)

Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.

S&F GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.(Make : Jindal, Tata, NECO

Taking down GI tubing & connection 15 mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.

S&F GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as directed by Engineer-in-Charge.(Make : Jindal, Tata, NECO)

S&F 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engineer-in-Charge.( Make : Supreme, Finolex, Reliance)

S&F 75 mm PVC (SWR) bend complete all as directed by Engineer-in-Charge.( Make : Supreme, Finolex, Reliance)

S&F 75 PVC (SWR) junction single,(single T) equal or unequal complete all as directed by Engineer-in-Charge.( Make : Supreme, Finolex, Reliance)

S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed.( Make : Supreme, Finolex, Reliance)

S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engineer-in-Charge.( Make : Supreme, Finolex, Reliance)

S&F 110 mm PVC (SWR) bend complete all as directed by Engineer-in-Charge.( Make : Supreme, Finolex, Reliance)

S&F 110 PVC (SWR) junction single,(single T) equal or unequal complete all as directed by Engineer-in-Charge.( Make : Supreme, Finolex, Reliance)

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for

S&F rotational moulded polythelene water storage tanks three layered cylindircal water tank for hoisted and fixed in postion of 1000 ltrs capcity incl fittings and as directed by Engr-in-Charge. (Make : Sintex, Sheetal, Polycon)

S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs complete all as directed by Engineer-in-Charge

S& F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms) complete all as directed by Engineer-in-Charge

M&L for RCC Septic tank conventional designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in walls, Base Slab, Baffle walls and Roof slab including beams etc with vent shaft, manhole openings with cover connections etc complete for 25 users Drawing No BTD-844) (Available at site)

M&L for RCC Septic tank conventional designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in walls, Base Slab, Baffle walls and Roof slab including beams etc with vent shaft, manhole openings with cover connections etc complete for 150 users (Drawing No BTD-844) (Available at site)

M&L Soakage well excavation in any type of soil, of size 3M dia x 6.00m effective depth foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M-25 concrete inculding interpecting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M-25/SFRC cover, interconnection pipes of RCC/DWC complete filled with brick bats.(Drawing No : CEJZ/STD-242/07)

M&L Soakage well excavation in any type of soil, of size 1.8M dia x 3.00m effective depth foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M-25 concrete inculding interpecting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M-25/SFRC cover, interconnection pipes of RCC/DWC complete filled with brick bats.(Drawing No : CEJZ/STD-242/07) (Available at site)

M&L, Surface dressing n exc 15 cm deep soft soil

M&L, Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 complete all as specified and drawing.(Make : Unistone, NTC, NITCO)

M&L, Sand filling under floors or in foundations including watering and consolidation.

M&L, Continuous brick edging with width equal to the depth of the brick, laid dry, on edge.

Cement concrete Type E2 1:5:10 (40 mm graded aggregate) in foundations, filling and mass concrete.

Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation n exc 10 sqm on plan and n exc 1.5 m depth and getting out soft/loose soil complete all as specified.

M&L, PCC Cement concrete with 1:3:6 type C-2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for complete or 150 mm dia pipe complete all as specified.

M&L, PCC Cement concrete with 1:3:6 type C-2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for complete or 200 mm dia pipe complete all as specified.

M&L, Providing cement concrete Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L, for NP-3 150mm dia pipe laid in trenches and jointed all as specified.

M&L, for NP-3 200mm dia pipe laid in trenches and jointed all as specified.

M&L, PCC 1:4:8 TYPE D 2 using (40mm grade stone aggregate) foundation,mass fillling complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick all as specified and directed by Engineer - in - Charge.

Removal of excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed by Engineer - in - Charge.

M&L, Providing precast reinforcement cement concrete Type B1 1:2:4 (20 mm Graded Aggregate) in landings, cover slabs (for man holes etc.).

M&L for providing coping cement concrete type B-0 1:2:4 (12.5mm graded aggregate ) rounded or chamfered edges complete all as specified and directed.

M&L for damp proof course 40mm thick in cement concrete 1:2:4 type B-0 to horizontal or vertical faces including necessary formwork as specified and directed by Eng-in-charge.

M&L for formwork to sides of concrete foundations, footings, bases of columns, plinth beam and similar work fair finished surface complete all as directed.

M&L for formwork to sides of pillars, posts,columns etc in square, rectangular and similar work fair finished surface complete all as directed..

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M &L, Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M & L RCC (design mix) M-25 ( 20mm graded agg) as in foundation, including rafts,plinth beams, footings for columns etc.

M&L for Reinforced cement concrete (design Mix) M-25 (20mm graded aggregate) as in Lintels & roof beam etc.

M & L RCC (design mix) M-25 ( 20mm graded agg) as .Columns, pillars, piers, posts and struts.

M&L for Reinforced cement concrete (design Mix) M-25 (20mm graded aggregate) as in slabs

Supply and fix TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge.

M&L moorum filling in floors laid in layers not exc. 15cm thick spread, leveled and rammed including watering (Moorum brought from outside MD Land)

M&L PCC (1:4:8) type D2 using 40mm graded aggregate 100mm thick as in sub base.

Hard core of gauge not exc 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of 100mm thick with broken/stone/boulers.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in 1:6

M&L for 10mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified and directed.

M/L for two coats of distemper oil emulsion over 3mm thick wall care putty including preparation of newly plastered surfaces of walls etc complete all as directed by Engineer -in-charge

M & L plinth protection 750 mm wide, 50mm thick cement concrete 1: 2:4 type B-1 using crushed aggregate finished even and fair over 75 mm (consolidated thickness) hard core of broken stone aggregate of not exceeding 63mm gauge laid to a slope of 1 in 20. It shall be laid in alternate bays, each bay not exceeding 3 m in length with joint to be filled with bituminous mastic filling comprising a mixture of one part of heated hot blown bitumen 85/25 penetration and three parts of heated sand,

Supply only liquid waterproofing compound.

S & F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note : Including Glass and painting ,MS gills shall be of 12mm dia MS square bar.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf Note: Including Wire mesh and painting etc complete all as specified and directed.

S & F mild steel ventilators with top hung shutter including hinges, steel peg stay, 3mm glass etc complete with 10m square guard bars @ 150mm c/c including painting complete

S & F MS pressed steel door frame for door with one or more rebate incl necessary fixing lugs hinges lock strike plate etc complete 105x60mm size of frame including filling in hollow with PCC (1:3:6) type C-0.

S & F 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S & F aluminium alloy, anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolt and sliding bolt of extruded section length of bolt of 300mm

S & F aluminium anodized barrel tower bolt of extruded section and fixed of size 150mm

M & L for hand cut kota stone slab in flooring 20 to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including screed bed 20mm thick in CM (1:6)

M & L for hand cut kota 20 to 25mm thick stone slab as in vertical surface as skiriting and dado jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including backing coat 10mm thick in CM (1:4).

M/L for Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement screed bed 1:3. (Make : Kajaria, H&R Johnson, Cera, Somany)

S/F 15mm dia bib taps, cast copper alloy with crutch or butter fly handles, screwes down, screwes for iron pipe,

S/F 20mm dia stop valves cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both endsfor iron pipe,

S/F for vitreous chaina ware squatting pan Orrisa pattern of size 630 X 450mm white with integral foot rests and including 10 ltrs capacity PVC valveless symphonic action low level flushing cistern and 32mm dia flush pipe etc complete (Make : Hindware, Cera, Parryware

S&F PVC (SWR) Floor trap 110 mm, setting and jointing with solvent cement (Make : Supreme, Fonolex, Reliance)

S&F110mm bore PVC(SWR) pipes single socketed ,in any length with rubber ring joints laid in trenches or floor. (Make : Supreme, Fonolex, Reliance)

S&F for PVC (SWR) vent cowl suitable for 110mm dia PVC pipe.

M&L, 15 mmStop valves fancy type, chromium plated with long shank and cup concealed type) cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F Brass chromium plated shower rose 125mm size with or without swivel joints fixed with union to GI pipe

S&F, Vitreous China Urinal, Half stall type, white with waste coupling and waste pipe in cluding push cock and spreader complete. (Make :- Hindware, Parryware, Cera)

M&L forTreating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface.

M&L for Treating the soil under plinth protection at the rate of 5 litres of mulsion per square metre of surface area

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

M&L for Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer confirming to IS :3384-1965 @ 0.40kg/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers laid with torching application to the surface over a coat of hot blown bitumen 85/25 @1.20 Kg/Sqm complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed by Engineer-in-charge.

M&L, for precast cement concrete M-25 Design mix using 20 mm graded stone aggregate as in manhole cover set in cement mortar (1:6) including necessary form work complete all as specified.

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as specfied and directed by Engr-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :-

One light point controlled by one, one way switch

One fan point controlled by one, one way switch

One socket outlet 3 Pin, 5 Amp on independent board

One socket outlet 3 Pin, 5 Amp on same board.

M&L for point wiring with 4.00 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 4 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board complete all as specfied and directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 6 Amp (ISI Marked) Make - SSK/Anchor/Cona

S&F switch piano flush type single pole one way 15 Amp (ISI Marked) Make - SSK/Anchor/Cona

S&F socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked) Make - SSK/Anchor/Cona

S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) Make - SSK/Anchor/Cona

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) Make - SSK/Anchor/Cona

Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface complete all as specfied and directed by Engr-in-Charge.

Supply, installation, testing and commissioning Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specfied and directed by Engr-in-Charge.

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specfied and directed by Engr-in-Charge. Note:- Two run of 6.00 Sqmm cable one run of 4.00 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.

Supply and fix LED Bldg security light fitting 30W housing made out of die cast aluminum alloy with toughed glass, IP 65 protection having clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape complete all as specfied and directed by Engr-in-Charge. Make : Wipro/Havells /Bajaj.

Supply & fix in repair decorative wall mounted fixed on study table with polycarbonate rings, and glass shade with lamp holders, connectors block including 1 x 12 watt LED blub etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable complete all as specfied and directed by Engr-in-Charge. Make ; Havells or equivalent in bajaj & philips

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specfied and directed by Engr-in-Charge.

Taking down old Exaust fan and Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers cutting of the holes in existing wall and making good the surfaces complete all as specfied and directed by Engr-in-Charge. Note: The old Exaust fan deposite to MES yard.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 25 Sqmm 4 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specfied and directed by Engr-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation of poles/ stays/ laying of cables etc and getting out including trimming of sides of trenches complete all as specfied and directed by Engr-in-Charge.

Material and labour for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specfied and directed by Engr-in-Charge.

Material and labour for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specfied and directed by Engr-in-Charge.

S & F in Repair sheet metal enclosure for MCB DB double door Triple pole & Neutral 4 way with 200 Amps rated bus bar complete all as specfied and directed by Engr-in-Charge. Make : Legrand/L&T/Havells

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 6 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specfied and directed by Engr-in-Charge. Make : Indoasian/Legrand /Schneider/Siemens/C&S

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 40 To 100 AMP and current carrying capacity in the DB complete with connection testing and commissioning complete all as specfied and directed by Engr-in-Charge. Make : Indoasian/ Legrand /Schneider/Siemens/C&S

S&F water GI tubes 'medium grade 25 mm dia with all fittings and fixed to wall and laid in floors complete all as specfied and directed by Engr-in-Charge. Make: Advance steel tubes, Jindal & TATA.

S&F water GI tubes 'medium grade 40 mm dia with all fittings and fixed to wall and laid in floors complete all as specfied and directed by Engr-in-Charge. Make: Advance steel tubes, Jindal & TATA.

S&F Gun metal half turn valve/gate valve with iron wheel head screwed both ends for GI pipe and fixed complete all as specfied and directed by Engr-in-Charge of the following sizes:-

a) 40 mm dia.

b) 25 mm dia.

S & F 25 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specfied and directed by Engr-in-Charge.

Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as specfied and directed by Engr-in-Charge.

Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:-

S & F of MCB, 10 to 32 Amp, SP, 240 Volt Make - Legrand/ Schneider-Acti 9/Siemens-Betagard

S&F of MCB, 40 Amp, SPN, 240 Volt Make - Legrand/Schneider-Acti 9/Siemens-Betagard

Taking down old unserviceable holder type fitting & supply & fix angle type lamp holder insulated with polycarbonate body and back plate housed with porcelain base including LED Lamp 10Watt. complete all as specfied and directed by Engr-in-Charge. Make-Havells/Surya/Bajaj .

Taking down old unserviceable bulkhead fitting & supply & fix bulkhead fitting decorative ceiling/wall mounted BULK HEAD with engineering plastic housing and top frame with opal PMMA diffuser suitable for 10 watt LED fittings of C&S electric or equivalent in model of Philips or Bajaj complete all as specfied and directed by Engr-in-Charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specfied and directed by Engr-in-Charge. Make : Wipro/Havells /Bajaj.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specfied and directed by Engr-in-Charge.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specfied and directed by Engr-in-Charge. Make- Havells/Bajaj/Khaitan

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric cable (heavy duty) 1100 volts grade with standard aaluminium conductor of size 16 Sqmm 2 core complete all as specfied and directed by Engr-in-Charge.

Supply and fix tubes "Light grade " of size 40mm dia galavanized with all fittings laid to walls and ceilings laid in floor complete all as specfied and directed by Engr-in-Charge.

Gurjit const co

G M BUILDERS 36