Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹61.0 LAccepted-AOC 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹65.3 L+₹2.8 L (4.48%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹68.6 L+₹6.1 L (9.80%)Rejected-Finance | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹70.0 L+₹7.5 L (12.0%)Rejected-Finance 5 6 MINTO ROAD ALLAHABAD 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L4 | Rejected-Finance Being other than Lowest Tenderer | |
| 5 | L5₹77.0 L+₹14.5 L (23.3%)Rejected-Finance B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹98 L
EMD Value
₹2.0 L
Closing Date
22 Apr 2023, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ng Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8910 DAY TO DAY MAINT AND REPAIRS TO BLDGS AT NPO INDA BSQ COMNETCEN NCD BLO SINGLE SAILORS BLOCK INS ANGRE AND HQ MNA UNDER AGE BR II UNDER GE NW KUNJALI
2023_MES_587842_1
8910/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) KUNJALI
₹2.0 L
Yes
21 Oct 2023
31 Mar 2023
24 Apr 2023
7 Apr 2023
22 Apr 2023
14 Apr 2023
31 Mar 2023 - 7 Apr 2023
Amount
Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)
Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)
Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each
Taking down shutters of any description not exc 1 sqm each
S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.
S&F 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated
S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side.
S&F 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified
S&F in repair powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, sliding windows/ partion/Ventilator etc including fixing and making the frames for hinges glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement,in sliding shutter, sealant etc all as specified and as directed by Engr- in- charge.
S&F in repair aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 102, 7.5 mm thick all as specified and as directed by Engr- in- charge.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc.
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc.
S&F 12mm thick prelaminated medium density particle board,interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.
S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section.
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section.
S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified.
S&F Stainless steel butt hinges 100 mm.
S&F 75 mm Stainless steel butt hinges.
M & L for hold fast. MS flat Conforming to Fe-290-0 or Fe-165
S&F in repairs 140 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified
S & F Aluminium extruded body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and ofweight not morethan 35 kg.
M&L for gentaly cleaning the surface of the stone masonary/ stone chips and piers with specialized eater misting techniques employing air water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone surface without over wetting followed up by gentle brushing with soft nylon brushes as specified and milded. Gentle surface cleaning may include using water misting and PH balanced surfactants as specified for indicated areas to remove surface dirt grit surface accretions, lime wash painting etc by means of water misiting and PH balanced surfactants and cleaning complete all as specified and as directed (Note : Quoted rate shall be inclusive of removing vegetation on wall surfaces.)
M&L for applying 4mm thick finished texture mortar in CM 1:2 (Mix one part of white cement & two parts of Dholpuri clear quarts powder of 1 to 2 mm grading) incl texture finish shall be achieved with the help of hand driven machine incld preparation of old painted surface & newly plastered surfaces and making plain surface of stone masonary pattern incld irrection & dismantling of scaffolding to carrying out works upto triple stories Bldg complete all as per manufactures instructions.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and rubbishing off the premises etc complete all as specified and as directed..
S & F froasted/Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers
S & F 4 mm thick bakelite sheet with decorative choice laminated on both side complete all as specified and as directed.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding for high rise building upto terrace etc as required and rubbishing off the premises etc complete all as specified and as directed..
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed.
M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.
M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.
M&L rendering 15mm thick in CM 1:6 on brick surfaces, finished with Neeru finish on walls complete all as specified and as directed.
M&L rendering 10mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling.
M & L rendering 20mm thick in two coats(15mm inner coat 5mm finishingcoat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound on finishing coat in the proportion as mentioned in manufacturer's instructions including necessary scafolding for high rise bldgs etc all as specified and directed. (Water proofing compound to be measured and paid for separately).
M & L rendering 20mm thick in two coats(15mm inner coat 5mm finishing coat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound on finishing coat in the proportion as mentioned in manufacturer's instructions including necesary scaffolidng all as specified and directed. (Water proofing compound to be measured and paid for separately).
Supply only integral water proofing compound complete all as specified.
M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth all as specified and directed by the Engineer-in-Charge.
M &L for applying two coats of oil emulsion distemper over newly plastered/ putty surfaces of wall all as specified and as directed by Engr in-Charge
M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper complete all as specified and directed by Engr in-Charge
M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather acrylic base paint (100 % acrylic) over one coat of cement based primer with necessary scaffolding for high rise bldgs etc all as specified and as directed by Engr in-Charge
M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather acrylic base paint (100 % acrylic) over one coat of cement based primer all as specified and as directed by Engr in-Charge
Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water and applying two coats of oil bound distemper over a coat Chalk whiting.
M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper all as specified and directed
M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scaffolding for high rise bldgs etc all as specified & directed.
M&L preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) all as specified & directed.
Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water and applying two coats of Plastic emulsion paint, on plastered/puttied surfaces,
M&L for preparation of old decorated surfaces of wall and applying one coat of plastic emulsion paint all as specified and directed
S & Fix repairs QPS-WHT-7753P180UF SPMZ of Jaquar or equivalent make of Cera, Hindware etc rimless bowl with side flush cistern for couples water closet UF soft close seat cover,hinges,single flush cistern, fitting and fixing accessories, size 420x710x810mm, P or S trap complete all as specified and directed by Engr-in-Charge.
S & F in repairs Water Closet cat part No 20089(S-10) ,Cat part No 21038 Cistern and seat cover of Hindware or equivalent make of Jaquar, Cera etc ,hinges,single flush cistern, fitting and fixing accessories, size 380x700x820mm, P or S trap complete all as specified and directed by Engr-in-Charge.
S & F in repairs floor mounted coupled water closet cat log No LYS-WHT-38751P cat log No LYS-WHT-38201 cistern,of Jaquar or equvalent make of Cera, Hindware etc bowl for coupled WC with UF soft closeseat cover, hinges fixing accessories set and accessories set, size 380x660x765mm, P or S trap complete all as specified and directed by Engr-in-Charge.
S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe).
S&F in repairs water closet squattin pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).
S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.
Supply only cast iron 'P' trap 100mm dia
S & F in repairs PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets.
S&F in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern
S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S & F in repairs health faucet (ABS Body) Stainless model No 902 of Silver shine or equivalent suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repair under counter wash hand basin vitreous china Cat part No CNS-WHT-705 of Jaquar or equivalentwhite/coloured size and design as directed by the Engr-in-Charge including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified (Make - Jaquar/Cera)
S&F in repair table top wash hand basin vitreous china Cat part No JDS-WHT-25909 of Jaquar or equivalentwhite/coloured size and design as directed by the Engr-in-Charge including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified (Make - Jaquar/Cera)
S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified,
S&F stainless steel sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm and bowl size 410 x 330 x 160mm fixed in repair.
S&F Stainless steel locks suitable for cupboards, drawers etc
S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed Cat log No FUS-29001 of Jaquar or equvalent.
S&F in repairs fancy type cock suitable for counter top wash basin 15 mm dia, screwed for iron pipe and fixed Cat log No FLR-5357N of Jaquar or equvalent.
S&F in repairs fancy type bib cock 15 mm dia, screwed for iron pipe and fixed Cat log No CON-037KN of Jaquar or equvalent.
S&F in repairs fancy type two way bib cock 15 mm dia, screwed for iron pipe and fixed Cat log No CON-041KN of Jaquar or equvalent.
S & F in repairs angular stop cock 15 mm dia , screwed for pipe and fixed Cat log No CON-053 KN of Jaquar or equivalent.
S & F in repairs Stainless steel soap dish holder Cat Log No ACN-1131N of Jaquar or equivalent.
S & F coner glass shelfwith bracket Cat log No CAN-1173 of Jaquar or equivalent.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc all as directed.
S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling all as specified.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiliing board / tiles deep panel (Make -Armstrong/Chanakya/Everest.
M&L for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old un serviceable false ceiling, complete all as specified and directed.
S&F 3 mm thick aluminium composite panel cladding plain of approved colour/shade to beam/column/slab incircular/rectangular shape inbcluding cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm C/C on exceeding column/beam/slab to hold APC cladding etc (Note : colour/pattern of ACP sheet shall be given by GE).
S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall vertically with screws and C/C distance 30 CM to make PVC frame as per specification and drawing. (Make Rajshree or equivalent)
S&F PVC wall /ceiling paneling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. (Make - Rajshree or equivalent).
S&F in repairs 18/19 mm thcik prelaminated partical board exterior grade prelaminated one side with lamination and other side balancing white lamination fixed with screw to frame work cupboard etc including 6 mm thick teak wood beading all around complete all as specified and directed.
S&F 12mm thick plywood ,grade BWP type BB, fixed with screws to timber frame as in paneling/partition complete all as specified and as directed..
M&L for 0.9mm thick decorative texture finish laminate type 1 , of surface finish colour and pattern as approved fixed with adhesive as per makers instruction complete all as specified and as directed.
S&F 1st class hard wood moulding as in cornices , joints of wall panelling board etc sectional area not exc 6 sqcm incl necessary french polishing complete all as specified and as directed..
S&F 2nd class HW plain fillets clean sawn square, rectangular or triangular in section, sectional area exc 13 but n.exc 25 sqcm fixed with nails all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.
S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walkj ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .
S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS -1161 1979 grade St-240
S&F in repair 12mm thick, toughened glass including itching etc for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots etc complete all as directed.
Demolition of reinforced cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.
M & L for reinforced cement concrete type B1 1:2:4 (20 mm graded stone agg) as in chajjas,slabs,beams etc with necessary form work.
M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.
All as per srl item No. 94 above but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc all as specified.
Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc all as specified and directed.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite
Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and directed.
M&L for machine cut cudappa stone slab 20-25 mm thick fixed independently and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M &L for machine cut kota stone slab flooring 18 to 20 mm thick as in steps, landings, floors etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,mirror polishing incl making 02 Nos grooves in steps over & incl 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.
Grinding and polishing existing floor of any type (Kota stone,mosaic,cuddappa stone etc) all as specified and directed.
M&L for PCC 1:3:6 type C-2 ( 40 mm graded stone aggregate) as in foundation, filling and mass concrete
M&L for pre painted machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour incliuding filling the joints with rising surface vibrator etc complete all as specified.
M&L for filling sand under floors or in foundations including watering and consolidation, spreading and levelling in layers n exc 25 cm thick and well ramming as required.
Material and Labour for machine pressed chequered cement coloured tiles of size 300mmx300mmx20mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and directed by Engineer -in-Charge.
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for all as specified.
M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately).
M&L PCC 1:2:4 type B-0 (using 12.50 mm graded aggregate) cement concrete as a leveling course on roof surfaces and coping etc.
M&L for applying a coat of bituminous primer 0.25 Kg/Sqm on prepared surface of plaster as per manufacturer's instructions, manufactured by the same agency of APP membrane. After applying of bituminous primer applying evenly a coat of bitumen 85/25 at the rate of 1.2 kg per sqm incl cleaning surfaces. Providing and laying five layered 4 mm thick APP (Atatic poly propylele) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm, as specified here-in-after. The APP membrane shall be laid using torch on application with minimum 100 mm side overlap and 150 mm end overlap. The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane. The APP membrane shall be taken upto minimum 200 mm on vertial surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet . over the APP membrane provide a polypropylene/polyester, non woven geotextile fabric of 150 gram/Sqm complete all as specified and directed.. Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of bituminous primer and a coat of bitumen 85/25 at the rate of 1.2 Kg per Sqm for APP membrane omplete all as specsified and directed by Engineer-in-Charge.
M&L for 50 mm dia and 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6 mm thick in CM 1:4 mixed with integral WPC on uneven surface to make it even. Fill it water and check for dampness and seepage, all junctions points of side walls where CI/GI pipe are passing shall be sealed with epoxy mortar. Apply two coats of polymer modified cementious water proofing coating of minimum thickness of 1 mm each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. Apply 20 mm thick plaster in CM 1:4 mixed with integral WPC of approved make on floors and walls including rounding of corners and junctions stoping towareds spouts. All pipes laid in sunken portions shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anti corrosive black japan paint on GI/CI pipes. Test the water proofed area by filling water at least 72 hours and tested for leakage/seepage for the entire satisfaction of GE. After above said treatment apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors complete all as specified and directed. (Note : If leakage/Seepage occured after filling water at least 72 hours, the above said treatment will be re-done completely)
M&L for cement concrete 1:3:6 type C-1 , (20 mm graded stone agg) as in foundation filling and sunken floors etc all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land
Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws as specified.
Demolition and breaking up drain pipes salt glazed stone ware, reinforced cement concrete, set in cement mortar 100 mm dia.
S & F 110mm bore PVC (SWR) pipes single socketed in any length wirh rubber ring joints fixed to walls.
-do- but 75 mm bore
S & F PVC (SWR) bends 110 mm bore
-do- but 75 mm bore
S & F PVC (SWR) branch piece 110 mm bore single Y
-do- but 75 mm bore
S & F PVC (SWR) vent cowl 110 mm bore
-do- but 75 mm bore
S&F 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.
M&L in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement75 mm dia.
Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed by EIC
S&F 160mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with MS clamps all as specified and directed.
S&F 160mm dia bore PVC (SWR) bends any radius
M&L for 75mm thick cement concrete 1:3:6 type C-2 (40 mm graded stone agg) as in sub base.
M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate ) as in plinth protection and similar works 75mm thick finished fair and smooth without using extra cement complete.
Taking up or down existing GI water tubing complete with all fittings of 15 mm bore
Taking up or down existing GI water tubing complete with all fittings of 20 mm bore
S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.
S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.
S & F UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc 15 mm bore pipe
-do but 20 mm bore
S&F PVC connections 15 mm size with PTMT nuts of length 600mm
M&L 32mm dia CP waste coupling, for glazed ware sinks, basin, Urinals etc with long shanks and fly, flange end.complete all as specified and as directed by Engr-in-Charge.
S&F vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified.
S&F vitreous china urinals, bowl type , flat back, size 465X355X265mm, white, with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1: 2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.(Exclusive of fixing supply pipe to flushing cistern , trap and waste pipe), fixed in repairs.
Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs.
Dismantling water tank of capacity exc. 500 Ltrs but n.exc. 1000 ltrs.
S&F rotational moulded polythylene water storage loft tank tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.
S&F rotational moulded polythylene water storage loft tank tank of 1000 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.
S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) all as specified and directed.
S&F in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile all as specified.
S&F 2mm thick Linoleum ,plain coloured laid in floors incliding streching, cutting , fitting incl seales down with an approved adhesive all as specified.
S & F 16 mm thick perforated particle board/ tiles for insulation and accoustic purpose, 60X60 cm in size, fixed with nails to timber frame work or with staples on snap grid for wall all as directed and approved and specified.
French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs etc all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces.
M&L for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint including external window with necessary scafolding for high rise bldgs.
S&F 4mm thick bakelite sheet with decoratie choice laminated on both side complete all as specified and as directed.
Removing of bldg materials exc 5 KM but not exc15.00 KM and depositing where direted.
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of bras, other parts made of mild steel heavy duty and fixed all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified.
S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete.
M&L preparation of paved/chequered floor area and applying one coat indigo floor paint or equivalent all as specified and directed.
S&F repairs urinal with sensor with complete fixing accessories all as specified and directed (Make - Jaquar or equivalent)
S&F in repairs Wall paper of fibrious material, nonwoven Vinyl free, making them fixed to wall with dry strips or with approved adhesive. Design & pattern as approved by GE.
S &F brass Key lock round knob type(locking mechanisum) easy push button facility for locking inside suitable for all doors all as specified and as directed Make Godrej and equivalent.
S & F SS grating suitable for 100/75 mm bore all as specified and as directed.
Shree Ayyappa Engineering
jalandhara construction
Frends Enterprises
SHRI SAI ENTERPRISES
PRABHU ASSOCIATES
RAMESH ENTERPRISES
Genius Construction Co.
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .