REPAIRS TO MISC B/R AND E/M WORKS AT AGE B/R LEKHANAGAR UNDER GE NASIK ROAD CAMP

Amount

Dismantling barbed wire fixed to any type of standard rails straining bolts (each line wire to be measured).

Dismantling RCC posts or struts any section, embedded in concrete, brick work, masonry etc. including taking out embedded portion and making good disturbed ground.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth round, in layers not exceeding 25 cm in soft/loose soil.

M&L posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire.

Supply only chain link MS galvanisd fencing, any size or type.

S & F 4mm dia plain mild steel wire, galvanised class 3 in fencing including straining and fixing to concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured).

M&L Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

S & F flat iron fillets (for securing wire mesh, chain link fencing etc.) including all necessary drilling, bolting or riveting etc., MS stiffener bars for chain link fencing and similar work.

S & F mild steel screw bolts (machine made) diameter of neck 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm.

M&L Preparing new untreated steel or iron surfaces any description exc 10cm width or girth and two coats of aluminium paint over and including a coat of red oxide zinc chrome primer.

M&L Preparing new untreated steel or iron surfaces any description n.exc 10cm in width or girth and two coats of aluminium paint over and including a coat of red oxide zinc chrome primer.

Demolition of concrete in ground floors and pavings n exc 15cm thickness (below or above ground level).

M & L Cement concrete 1:4:8 Type D2 (40 mm graded aggregate) in foundations,filling and mass concrete.

Demolition of Brickwork or stone boulder masonary,built in cement mortar including all quoins,arches,pillars,etc but excluding ashlar facings,dressed stonework and precast concrete articles.

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius,built in cement mortar 1:6.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work finished fair and even.

M&L preparation of newly plastered surfaces and applying two coat of cement base paint on wall complete all as specified and directed.

Surface dressing n exc 15 cm deep on any type of soil and disposing off excavated soil to a distance n. exc. 50m.

Moorum filling in pavings or road berms, laid in layers n exc. 15 cm thick, spread, levelled and rolled including watering. (moorum to be brought from outside MD land)

Excavating over areas, n exc 1.5 m deep and getting out in any type of soil as in road side berms and the like.

Removing excavated soil exc. 1 km but n. exc. 1.50 km and depositing where directed at a level n exc. 1.5 m above the starting point.

Returning, filling in soil incl. Spreading,leveling,watering and well ramming in layers n.exc 25 cm all as specified & directed.

Demolition and breaking up drain pipes upto 450 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar.

M & L150 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars. (RCC pipes shall be of approved make with ISI mark as approved by GE)

M & L 200 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars. (RCC pipes shall be of approved make with ISI mark as approved by GE)

M & L 450 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars. (RCC pipes shall be of approved make with ISI mark as approved by GE)

M& L machine pressed precast conctete interlocking paver block with grey cement and pigment with rubber moulded glossy finished surface, any shape and size confirming to IS 15658-2006 of 40 mm thickness M-25 grade laid over and including 30 mm thick sand/ stone dust cushion.(Paver Blocks shall be of approved make with ISI mark as approved by GE)

M&L machine pressed precast conctete interlocking paver block with grey cement and pigment with rubber moulded glossy finished surface, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35grade laid over and including 30 mm thick sand /stone dust cushion.(Paver Blocks shall be of approved make with ISI mark as approved by GE)

M&L machine pressed precast conctete interlocking paver block with grey cement and pigment with rubber moulded glossy finished surface, any shape and size confirming to IS 15658-2006 of 80 mm thickness M-30 grade laid over and including 30 mm thick sand/ stone dust cushion.(Paver Blocks shall be of approved make with ISI mark as approved by GE)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L Chequered cement concrete tiles with grey cement and pigment 30cm x 30cm x 25mm thick, with rubber moulded glossy finished surface, laid in floors over and including 15mm thick cement mortar screed bed in cement mortar 1:6, set jointed and pointed in neat cement slurry in floors.

M&L for Rough finished shahbad stone slab 18-25mm thick incl, 15mm thick cement mortar screed bedding 1:6, laid and jointed & pointed in CM 1:4 all as specified & directed.

M&L Providing factory made precast cement concrete type B-1 1:2:4 (20 mm graded aggregate) kerb stones with smooth rubber moulded finish, including chamfers, weatherings, etc. and setting in mortar 1:4 complete with joints to match including necessary earthwork.

M&L Preparing new or untreated brick, stone, concrete, asbestos cement or plaster surfaces of any description over 10cm girth or width, not otherwise described and two coats of synthetic enamel paint over and including priming coat.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings.

Dismantling wrought iron or mild steel work of any description such as purlins for roof and window guard bars.

Supply and fixing steel work in tubular or rectangular hollow section in rafters, purlins etc. and connected works complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Preparation of new or previously untreated steel or iron surfaces of any description over 10cm width or girth and two coats of synthetic enamel paint over a coat of red oxide primer.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in beams, staircases, cooking platform, shelves, landing, chajjas and similar suspended work.

M&L for factory made pre cast reinforced cement concrete 1:2:4 type B1 (using 12.5 mm graded stone agg) as in manhole cover slabs and similar works including necessary form work and reinforcement 10 mm TMT bar set in CM 1:6 all as specified and directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc ( note -(1) credit for above items should be made as per conditions separately. (2) old servicable switch/socket/regulater/switch-socket/call bell/bell push shall be deposited to AGE E/M yard and reused against apropriate items, all as specified and directed by Engr-in-Charge)

Taking down unserviceable/partly serviceable light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes.(NOTE- old serviceable fitting shall be deposited to AGE E/M yard and reused against apropriate items, all as specified and directed by Engr-in-Charge)

Material and labour for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface conduit not less then 20 mm, width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface wll / floor / roofs etc.complete all as specified and directed. (Make of cable - Standard / Plaza / Havells / Polycab & Make of PVC conduit & accessories - Pricision / Presfit / Modis) Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.

(a) One light point controlled by one, one way switch

(b) One ceiling /exhaust fan point controlled by one switch and regulator

Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 32 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick/ ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified MAKE OF CABLE - STANDARD/ PLAZA /HAVELLS/POLYCAB & MAKE OF PVC CASING/CAPING - PRICISION/PRESSFIT/MODI .Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.

(a) One light point controlled by one, one way switch

(b) One ceiling /exhaust fan point controlled by one switch and regulator

(c) One 3 pin 5 amp socket out point on the same board with other switches.

(d) One3 pin 5 amps socket out let point on independent board

(e) One bell/buzzer point controlled by one bell push.

All as per same in item No 48 above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.

S &F Switch piano flush type single pole one way 5 amps.

S &F Socket out let 2 in one, 5/3 pin 5Amp

S &F Switch socket combination 5 Amps 5 pin flush type

S &F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal .

S &F Ceiling rose, surface bakelite 65x50 mm three terminal

S &F Call bell AC-230 Volt single pole ding dong

S &F Bell push, flush type 5 Amps.

S &F Electronic regulator 100/120 Watt step type Note:- For Item Srl No-6-13 Make of Anchor, Standard, Havells, Siska, Crompton

S&F 20 Watt Batten (4 feet) suitable for LED T8 lamps decorative luminaire designed for LED Tube comprises of CRCA pre coated housing with two colored plastic End cap. Crompton Cat Ref : DMLN1LT8-16 , Havells Cat No: REGALBATTENT 8UPTO1X22WDSBSWH, or eqvt of Bajaj/Philips

S&F 20 Watt LED Tube Light (4 feet) comprises of extruded Strip in thermally conductive material & extruded housing in Optically efficient material milky white with inbuild split LED driver at the end of LED tube & FR grade engineering plastic End. Make : Crompton Cat Ref :LT8-20-865-2, Havells Cat No: CRYSTAL 1213T8DSTL20WLED865SGLASS or eqvt of Bajaj/Philips

Supply and fix in repaires POLARIS NIO - I LED recessed full lit luminaire with glare free uniform illumination with longer life and less maintenance. (Make - Crompton Cat part No- LCTLRNE-36-FO-CDL, or eqt of Havells/ Bajaj / Philips)

Supply and fix in repaires POLARIS NIO - I (1X1 FEET) LED Recessed full lit luminaire with glare free uniform illumination with longer life and less maintenance. Make - Crompton Cat part No- LCTLSNE-18-FO-CDL or eqt of Havells/ Bajaj / Philips

Supply and fix VENUS NEO HE 2X2 ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination with its driver Cat No-LEDDRIVER36V18WS . Make - Havells Cat part No- VENUSNEOHE2X2PLR18-42WLED857MOD anddriver Cat No-LEDDRIVER36V18WS or eqt of Crompton/ Bajaj / Philips)

S & F 09 W LED tube light (2 Feet) (LUMILINE), basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete, & including coneecting up with 2 core flexible coppper conductor cable and mounting clamps & PVC squre box 75x75mm - 2 Nos etc. Make:- Havells Cat Part No-LUMILINEBS9WLED865SPCWH, Crompton Cat Part No-DMLN1LT8-8 (Batten) with Cat Part-LT8-8-865-2 (tube light) or eqvt as approved by GE.

S & F 15 Watt LED streetlight fitting luminaire comprises of pressure die cast aluminium housing powder coated in silver grey and toughnedglass. This luminaire is recommended for illuminating access roads, Garden ways, small streets etc. IP65 protection , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge. Make : Crompton Cat Ref : LSTS-15-CDL, Havells Cat Part No- ENDURAPEARLSL15WLED757SASYTOPC or eqvt of Bajaj/Philips

Fabrication,supply & fixing of GI pipe bracket up to 40 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for any size and type of LED security light fitting

S & F 18 W LED (PEARL II) round surface mounted LED flat panel, PDC aluminum housing and PMMA diffuser makes it a robust luminaire, including connecting up with twin core twisted flexible copper conductor cable with suitable size, 230V, 50Hz, complete all as specified. Make: Crompton Cat Part No-LCDSPLN-S-18-CDL, Havells Cat Part No- LHEAAVP5IL1W018 (COMET ROUND) or eqvt of Bajaj/Philips

S & F Moon (Opal) decorative gate/garden light made up of high grade unbreakable polycarbonate material suitable for retrofit CFL/LED 8 W/14 W (TU) B22 base including connecting up with twin core twisted flexible copper conductor cable, 14W LED lamp, housing PVC pipe etc complete all as specified and directed. Make: Havells Cat Part No-LHFXBON1TN5Q008 or eqvt in Bajaj/Cromption/Philips

S & F in repair of Ultra bright 1X9W LED PL-L (Photon Ultra PL-L) with very high efficacy suited for installation in existing 2G11 lamp holders including connecting up with twin core twisted flexible copper conductor cable with suitable size, 230V, 50Hz, complete all as specified. Make: Havells Cat Part No PHOTONULTRA PLL222TL9WLED865SPC or eqvt in crompton/bajaj/philips

S & F of Ultra bright 1X18W LED PL-L (Photon Ultra PL-L) with very high efficacy suited for installation in existing 2G11 lamp holders including connecting up with twin core twisted flexible copper conductor cable with suitable size, 230V, 50Hz, complete all as specified. Make: Havells Cat Part No PHOTONULTRA PLL419TL18WLED865SPC or eqvt in crompton/bajaj/philips

S & F in repair 6 W LED downlighter (Star Slim Panels) sleek, compact and energy saving recess mounting LED slim panels with light weight body & energy efficient drivers , size of ceiling cutout ø 105 mm. including connecting up with twin core twisted flexible copper conductor cable with suitable size, 230V, 50Hz, complete all as specified. Make: Crompton Cat Part No-LSDRMN-6W-CDL, Havells Cat Part No-LHEBHDP7IZ1W006 or eqvt of Bajaj/Philips

S & F in repair 9 W LED 6500 K downlighter (Octane LED Panel Round) Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver, size of ceiling cutout ø 138 mm, height 23±1 mm for 9 W, including connecting up with twin core twisted flexible copper conductor cable with suitable size, 230V, 50Hz, complete all as specified. Make: Havells Cat Part No-LHEBHDP7IZ1W009 or eqvt in Crompton/Philips/Bajaj

S & F 12 W LED downlighter (Star Slim Panels) sleek, compact and energy saving recess mounting LED slim panels with light weight body & energy efficient drivers , size of ceiling cutout ø 155 mm. including connecting up with twin core twisted flexible copper conductor cable with suitable size, 230V, 50Hz, complete all as specified. Make: Crompton Cat Part No-LSDRMN-12W-CDL, Havells Cat Part No-LHEBHDP7IZ1W012 or eqvt of Bajaj/Philips

S & F 15 W LED downlighter (Star Slim Panels) sleek, compact and energy saving recess mounting LED slim panels with light weight body & energy efficient drivers , size of ceiling cutout ø 185 mm. including connecting up with twin core twisted flexible copper conductor cable with suitable size, 230V, 50Hz, complete all as specified. Make: Crompton Cat Part No-LSDRMN-15W-CDL or eqvt in Havells/Bajaj/Philips

M/S MANISH CONSTRUCTION CO

M/S K. K. Construction

Vinod Enterprises

UNITED ENTERPRISES

SHILPVED

M/s. SHRI SAINATH ENTERPRISES

M/S MK Nair

M/S GURBAX AND CO

Vishal Constructions