SPECIAL REPAIRS TO TOILETS COOK HOUSE FLOOR ROOF FALSE CEILING WALLS OF VARIOUS ROOMS IN OFFICER MESS BUILDING NO P 545 AT CDM UNDER GE NORTH SECUNDERABAD

Amount

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed.

Supply only liquid water proofing compound for waterproof plastering complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:6 with WPC @3% by weight of cement including finishing the surfaces complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately under relevant item of this schedule.

Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Vitrified Ceramic tiles of dark shade double charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

S&F non-skid Ceramic tiles 7mm to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11Sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

S&F Glazed ceramic coloured tiles in vertical surface 350x 250x7mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick rendering in CM 1:3 complete all as specified and as directed.

S&F GI tubing 15mm bore medium grade with all fittings fixed in short length to walls and ceilings or laid in floors including taking down 15mm dia GI tubing and connections complete all as specified and as directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, in cement mortar 1:3 cutting not exceeding 10cm girth complete all as specified and as directed.

S&F in repairs Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

Cutting existing steel tubing for alterations or additions (Each cut measured) 15mm pipe complete all as specified and as directed.

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) 15mm pipe complete all as specified and as directed.

S&F in repair vitreous china counter top WHB white of size 565x415x190mm or required size as approved and complete all as specified and as directed. Make: JAQUAR or equivalent in Hindware /Parryware/CERA as approved.

S&F in repairs 15mm size pillar tap fancy type long shank chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make: JAQUAR or equivalent in Hindware /Parryware/CERA as approved.

S&F in repair PTMT waste coupling 32mm dia complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed in repair etc., complete all as specified and as directed.

S&F CP health faucet with 1.0 mtr tube and hook complete all as specified and as directed. Make: JAQUAR or equivalent in Hindware /Parryware/CERA as approved.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 complete all as specified and as directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm & PVC LDPE waste pipe 32mm dia 1m length complete all as specified and as directed.

S&F in repairs 15mm size two way bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs Soap dish, vitreous China white, approximate size 160x160x90mm embedded in the wall complete all as specified and as directed.

S&F in repairs liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and as directed.

S&F in repairs Stop/angle valves fancy type 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Make: JAQUAR or equivalent in Hindware /Parryware/CERA as approved.

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing fixed in repairs complete all as specified and as directed.

S&F Aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F vitreous China wash down water closet pan, divine 'P' Trap 180 mm (pedestal pattern),wall hung type (one piece set) white (including fixing bolts, in built flushing cistern and flush pipe) including seat cover complete all as specified and as directed. Make : Prayag sanitary ware or equivalent in JAQUAR asapproved by GE.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and as directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and as directed.

S&F Brass handles 150mm size, cast type, polished bright fixed in repairs complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F Brass, sliding door bolt 300mm with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed in repairs complete all as specified and as directed.

S&F Butt hinges of 125 mm size, Medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 110 mm bore UPVC/PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F PVC (SWR) junction single (Single T) equal or unequal for 75mm dia pipe fixed complete all as specified and as directed.

S&F Low density polyethylene (LDPE) pipes of pressure rating 6 kg/sq. cm 50 mm bore single socketed in any length with rubber ring joints fixed to walls/floor as spout etc., complete all as specified and as directed.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and as directed.

Supply and fix in repair bathroom mirror cabinet PVC of size 450 X 300 mm fancy type complete all as specified and as directed. Make: Cat No-554 of Prayag or equivalent as approved by GE.

M&L for preparation of new wall surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying three coats of colour wash complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty in two layers complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two coats of plastic emulsion paint over a coat of alkali resistant primer over 3mm thick wall care putty in two layers complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of plastic emulsion paint over a coat of alkali resistant primer over 3mm thick wall care putty in two layers complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty in two layers on walls complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surfaces and applying three coats of colour wash complete all as specified and as directed.

M&L for complete removal of existing treatment of old ceiling surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty in two layer complete all as specified and as directed.

M&L for complete removal of existing treatment of old ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall/concrete surfaces of any height as per manufacturer's instructions complete all as specified and as directed.

S&F in repairs Brass CP bottle traps 32mm bore for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, laid in cement mortar complete all as specified and as directed.

M&L for Brick work with flyash 'B' bricks, straight or curved on plane exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, as WHB counter top bedded over brick pillar and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L for Precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate set in CM (1:4) in landings for WHB, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.

S&F for Mild steel TMT bars 6 to 8mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.

M & L for treating the marble surface with beeswax polish complete all as specified and as directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exceeding 1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exceeding 1.5 but not exceeding 4Sqm each complete all as specified and as directed.

M & L for preparing new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of aluminium red oxide primer complete all as specified and as directed.

M & L for preparing new steel surfaces of any description not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of aluminium red oxide primer complete all as specified and as directed.

M & L for preparing old steel surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparing old wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including one coat on old work complete all as specified and as directed.

S&F pressed steel frames 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening as per specifications & drawings complete all as specified and as directed.

S&F Factory made PVC solid door shutter 28 to 30mm thick (styles) with 2,4,or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm Plain colour PVC sheet on back face with particle board Core supplying and fixing in frame at site as per specification complete all as specified and as directed.

S&F Flush shutters of 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, if one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed.

S&F Vitreous china urinal partition white of size 310x700 mm about 40cm above floor line, fixed in repairs complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including white seat cover complete all as specified and as directed.

S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe PVC bend etc., complete all as specified and as directed.

M&L for MS hold fasts of FI 25 x 3 mm complete all as specified and as directed.

M&L for Vitrified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/daddo etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in CM 1:3 complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over and including 15 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

S&F in repairs 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square nexc 0.5 sq. m in each pane complete all as specified and as directed.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F for 140 mm long floor door stopper aluminium alloy body and tonge, anodised with hard drawn steel spring fixed in repairs complete all as specified and as directed.

S&F for 140 mm long floor door stopper of brass body and tonge with hard drawn steel spring fixed complete all as specified and as directed.

S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed.

S&F for Anodised aluminium door shutters of fixed/sliding type, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and as directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5Sqm in each pane complete all as specified and as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified and as directed.

Taking down of existing water closet of pedestal type, any size including all fittings complete all as specified and as directed.

Taking down of existing WHB, any size including all fittings complete all as specified and as directed.

Taking down of existing Urinal, any size including all fittings complete all as specified and as directed.

Dismantling of plain or corrugated galvalume steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall & crimp as sheet, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

M&L for rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins columns where connected to common rafters fixed with angle cleats or other connecting plates Fe-410-W (Gde-E-250) quality complete all as specified and as directed.

Taking down of existing roof treatment consisting of screed bed plaster tar felts etc., complete all as specified and as directed.

Demolition of cement concrete of any description (unreinforced) in any position including plastering etc., complete all as specified and as directed.

M&L for PCC 1:2:4 Type - B0(using 12.50mm graded stone aggregate) as in padding concrete, covering etc., on roofs complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:4 using water proofing compound on concrete surfaces of roofs including parapets etc., and providing necessary slope complete all as specified and as directed. Note: Water proofing compound shall be measured and paid seperately.

M&L for priming surfaces and applying normal treatment (for moderate conditions) except felt complete all as specified and as directed. Note: Membrane belt shall be measured and paid separately.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wave fabric (Wt not less than 150gm/sqm) land on primed surface by forced application complete all as specified and as directed.

M&L for applying two coats of Aluminium paint over a coat of primer of new surfaces of any description over 10 cm in width or girth not otherwise described complete all as specified and as directed.

M&L for brushing neat cement slurry with 3.0kg of cement per Sqm complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F Gl frame work of size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20mm and 30mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15 mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hangers 6 mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M & L for Providing and fixing 12mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and as directed. Note: Fillets, metal frame work and GI wire mesh paid separately.

M & L for Providing and fixing 12mm thick plaster of paris ceiling for any sunk or raised moulding (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with GI wire mesh over sunk or raised complete all as specified and as directed. Note: Fillets, metal frame work and GI wire mesh paid separately.

M&L for preparation of new gypsum board ceiling surfaces and applying two coats of OBD over a coat of alkali resistant primer over plaster of paris putty of 1 mm thickness on ceiling surface complete all as specified and as directed.

Dismantling partition/ glass door, any description, fixed in any position complete all as specified and as directed.

S&F 12mm thickness toughened glass as in wall partition, parapet cladding in SS rail & door shutter of approved brand and manufacture, including providing and fixing of top & bottom pivot & spring type fixing arrangements & necessary holes & making good & required hinges,SS 304 grade handles,door/floor spring etc and including all necessary fittings complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/size of light/ fan/tube/power/two way/bell point etc., on TW batten/conduit including removal of batten/conduit/gutties/wooden boards/switches/sockets/ regulators/light fittings etc., and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

Taking down the existing unserviceable main switch/cut out /DBs of any type/capacity/description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M & L for Point wiring on concealed conduit with 1.5 Sq mm FRLS copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through existing conduit and conduit accessories of suitable dia medium grade and modular accessories including fixing/grouting sunken/ surface along with modular flush box of suitable thickness covered with suitable modular cover plate including running up of 1.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc., complete all as specified and as directed for one light/fan/Bell point controlled by one, one way switch 5A, SP NOTE: Rate of Modular Flush box and Cover plate are inclusive of rate quoted by the contractor

All as per item No. 110 above but one 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per item No. 110 above but one 3 Pin 5 Amps switch socket independent board complete all as specified and as directed.

All as per item No. 110 above but using 2.5 Sqmm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sq mm FRLS copper conductor PVC wire as earth continuity conductor alongwith wiring and connecting to the common earth dolly complete all as specified and as directed.

S & F Modular switch 1 way 10 A, 1 Module capacity 230 volts complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

S & F Modular switch 1 way 16 A, 1 Module capacity 230 volts complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

S&F Modular Bell Push 10A, 1 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

Supply and fix socket outlet modular type multipurpose 2/3 Pin, 10 amps, 230 volts combined 2 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

Supply and fix socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

S & F Modular ceiling fan regulator stepped type heavy duty suitable to work on 230 volts, 2 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

S & F calling Bell, AC, 230 volts, single pole complete all as specified and as directed.

S & F in replacement of Single pole and Neutral enclosure with a two pin and earth plug and socket metal clad complete with one single pole MCB 20 Amps (AC Box) complete all as specified and as directed. Make: Standard/Havells/IndoAsian

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed.

S&F sheet metal enclosure vertical type MCCB DB TPN 4 way double door with 200 Amps rated bus bar 415 volts suitable for and including 63/100 Amps TPN MCCB 16 KA as incoming and 12 Outgoing SP MCB's with magnetic locking system complete all as specified and as directed. Note: MCB SP shall be measured and paid separately all as specified and directed. Make: Standard/Havells/IndoAsian

M & L for chipping the wall for fixing of DB and plastering the disturbed surface in CM 1:6 along with putty and existing colour complete all as specified and as directed.

S and F sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and as directed. Make: Standard/Havells/IndoAsian

S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and as directed. Make: Standard/Havells/IndoAsian

S & F MCB SPN 230V suitable for fixing on MCB DB of capacity 40 Amps complete all as specified and as directed. Make: Standard/Havells/IndoAsian

S & F MCB TP 415V suitable for fixing on MCB DB of capacity 40/63 Amps complete all as specified and as directed. Make: Standard/Havells/IndoAsian

S & F MCB TPN 415V suitable for fixing on MCB DB of capacity 63 Amps complete all as specified and as directed. Make: Standard/Havells/IndoAsian

S & F in replacement Fancy type lights (Round Type) of 20 watts including LED lamp complete all as specified and as directed. Make: Philips Model SM251C LED20S - 6500 PSU WH or equivalent make in Wipro/GE

S & F in replacement of wall mounted batten type LED light of 22 watts with aluminium extruded batten and system lumens of 2200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 , colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and as directed. Make: Philips Model Mirolta Essential 22 watts or equivalent make in Wipro/GE.

S & F in replacement of 33 watts high efficient LED 595mmX595mm recess mounting light fixture of CRCA housing with luminaries system efficacy 120 lm/w with IP & surge protection of 2.5 kV, power factor >0.95 complete with all accessories complete all as specified and as directed. Note: Cutting of False ceiling and removal of old fitting and re-arranging the False ceiling with existing size, Gypsum board/POP false ceiling is to be done if required. Cost of false ceiling work is inclusive of rate quoted. Make: Philips Model FULL GLOW RC380B LED42S-6500 or equivalent make in Wipro/GE

S & F in replacement of wall mounted batten type LED light of 36 Watts housed in aluminium extrusion for better heat dissipation with wider diffuser for enhanced and uniform light spread along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and as directed. Make: Philips Model Mirolta Pro 36 watts or equivalent make in Wipro/GE

S & F of false ceiling fitting Iron ring suitable for POP/GYPSUM false ceiling and suitable for above mentioned recess mounting light complete all as specified and as directed.

S & F in replacement of recessed mounted LED of 1x6watts spot light focused beam with COB complete all as specified and as directed. Make: Havells/Philips/Wipro

M & L for Submain wiring with two single core 4 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 4 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note:- Two runs of cable, one run of earth continuity conductor and one run of conduit shall be measured and paid as one unit length.

M & L for Submain wiring with two single core 6 Sq mm PVC insulated unsheathed FRLS copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of suitable dia medium grade including running up of two runs of 6 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note:- Two runs of cable, one run of earth continuity conductor and one run of conduit shall be measured and paid as one unit length.

M & L for Submain wiring with four single core 10 Sq mm PVC insulated unsheathed FRLS copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of suitable dia medium grade including running up of two runs of 10 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note: Four runs of cable, one run of earth continuity conductor and one run of conduit shall be measured and paid as one unit length.

Disconnecting the Electrical connection, removing the copper line, discharge line of Split AC 1.5/2.0 Ton capacity including indoor and outdoor units and all accessories and shifting/re-installing and testing the whole unit of Split AC in new location and checking the leakage of Split type 1.5/2.0 Ton AC with the help of N2 Gas and after defecting and repairing the leakage, charge the suitable refrigerant upto required level as specified in suitable size and length of copper pipe and making the holes in wall complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth electrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.

Disconnecting and removing ceiling/exhaust/wall fan of any capacity any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan complete all as specified and as directed. Note: Necessary repairs/ replacement of unserviceable parts shall be measured and paid separately.

Material and labour for rewinding of the ceiling/exhaust/wall fan complete with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing of ceiling fan of any make and any sweep including taking out burnt copper wire complete all as specified and as directed. Note: Old winding material is property of the contractor and shall be considered under schedule of credit.

Supply & Fix in repair of Ball bearing/Brass bush of Ceiling/Exhaust Fan upto 300mm complete all as specified and as directed.

Supply & Fix in repair of capacitor of ceiling exhaust fan upto 300mm complete all as specified and as directed.

S & F in replacement of Security Lights of 1x30 watt LED light with high power LED and unique peanut lens to ensure uniform distribution with suitable pipe bracket 32 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and as directed. Make: Philips Model BRP046 LED 30 CW MR S1 PSU GR or Havells Model ENDURA SUNDOWNSL25LED765 PASYBOPCIHD or equivalent make in Wipro

S & F in replacement of triple pole and neutral enclosure with a three pin and earth plug and socket metal clad complete with one three pole MCB 32 Amps (AC Box) complete all as specified and as directed. Make: Standard/Havells/IndoAsian

S&F of rigid non-metallic PVC conduit 25mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., complete all as specified and as directed.

S&F of rigid non-metallic PVC conduit 40mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., complete all as specified and as directed.

Supply & Fixing rigid PVC Casing & Capping of 40mm wide complete all as specified and as directed.

SAI RUPA CONSTRUCTIONS

M/S DIVIJA BUILDERS

SKY CONSTRUCTIONS

K LAKSHMAN SINGH AND CO