PROVN OF 01 X COVERED STORAGE SHED TOILET BLOCK GEYSERS AND EXHAUST FANS FOR CERTAIN UNITS UNDER AGE B R I AND AGE E M OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in soft/loose soil complete all as specified.

Excavation over areas not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Ditto all as per item No. 3.00 here-in-before but exceeding 1.50mtr wide and not exceeding 3.0mtr deep

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Removing excavated material (soil) to a distance exc 250m but not exc 500m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for 50mm thick sand filling ubder floor or in foundations including watering and consolidation complete all as specified and directed.

Supply of approved earth free from grass, vegetaaion sapling etc from outside of MoD lanf including necessary excavation , loading, transportation and dumping earth at the location of emankment also including royality and other elements etc. speading, levelling, watering and well ramming in layers complete all as specified as directed.

M&L for ATT treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for ATT treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)complete all as specified and directed.

M&L for ATT treating the the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for ATT treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete etc all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone aggregate in chajjas and in shelves and the like complete all as specified and directed.

M&L Reinforced cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick in rough finish of concrete surface etc., complete all as specified and directed.

Use & Waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide rough finished surface of concrete complete all as specified and directed.

M&L for brick work with fly ash brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 30.00 here-in-before but 8 mm dia

All as per item No. 30.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled Galvalume / Zincalume sheet with min thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, AI Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F roof trusses (farmed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing MS tubes medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat , MS plate etc including necessary welding, fittings etc Fe-410-W (Gde-E-250 quality-B) complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde-E-250 quality-B) complete all as specified and directed.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 260mm long and dia of neck from 16 mm complete all as specified and directed.

S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified complete all as specified and as directed

S&F suspended false ceiling using anodised GI exposed ceiling suspended system perimeters channel 0.55mm thick having web of 27mm and flange of 30mm on one end 20mm on other and fixed to wall with the help of nylon sleeves and providing fixing Gypsum board 12mm thick in ciling fixed with screw and GI frame and finished surface and finishing surface attachment and finnaly board have tobe jointed and finished look with POP, oil based putty with primer and two coat of plastic piant to have a flush look using jointed compound/tape painting etc all as specified as directed.

M&L for Rendering 15mm thick in two layers (10+5mm) externally on fair faces of brick or concrete surfaces in cement mortar 1:4 with water proofing compund in top layer of 5mm thick as per manufacurer's instructions, finished surfaces fair and smooth without using extra cement complete all as specified and directed. (Note: - WPC shall be measured and paid separately under relevent items.)

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and directed.

Supply only water proofing compound (Liquid) complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints to be given every 3m interval and corners of building and filled with bituminious mastic mortar or equivalent fillar complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub base for receiving floor finishes all as specified.

M&L 100mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in flooring, finshed even and smooth without using extra cement complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

S&F for Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. mcomplete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. over 15mm thick screed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic tiles of size 300mmx 450mm , 6 to 7 mm thick on the vertical surfaces such as in skirting / dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of the tiles, over and including 10mm thick cement mortal backing coat in CM 1:4 complete all as specified and and as directed.

S&F for Pressed Steel frames for doors of size 125x60mm with one or more rebates for double shutter including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F Flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 125mm long aluminium alloy handle, cast type anodised (ISI Marked) complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt (ISI Marked) complete all as specified.

S&F 125mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and directed.

S&F Aluminium alloy anodised sliding door bolts, of 300 mm long with hasp, staple (bolt type) fixing clips of sheet cast or extruded section, fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F Steel window with side shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded as specified and directed.

Ditto all as per item No. 56.00 here-in-before but without glazing bars,

S&F steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

S&F 5mm thick figured glass pin head type and glazing with oil putty tosteel frame in squares n exc 0.50 sqm in each pane complete all as specified and directed.

S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty tosteel frame in squares n exc 0.50 sqm in each pane complete all as specified and directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces and two coats of white wash on walls complete all as specified and directed.

M&L for preparation of newly plastered surfaces and two coats of cement base paint on walls complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls with 02 coat of Birla/Asian wall care putty and applying two coats of oil bound distemper white or tint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coat acrylic smooth exterior paint coat over a coat of primer (Two coat applied 1.67 Litre/10 Sqm over priming coat @2.20kg/10Sqm) over two coat Birla/Asian wall care putty complete all as specified and directed.

S&F in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white (excluding fixing bolts, flushing cistern and flush pipe) including connection to outgoing pipe and flushing pipe complete all as specified and directed.

S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and directed.

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 500ltrs capacity, conforming to IS-1270(1989), cylindrical vertical type double-layered) with closed top including inlet, outlet and wash out holes, provision of G.I Fittings for fixing of the inlet, outlet and washout pipes, hoisted in position complete all as specified and directed.

S&F stop valve 20mm bore, CP cast copper alloy with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 20mm bore, Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified and directed.

S&F Towel rail 600mmlong of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, 20mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast), in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast/fixed in wall complete all as specified and directed.

S&F 100mm bore cast iron (sand cast) bends any radius with oval access door including jointing with cement joint complete all as specified.

S&F 110 mm dia PVC (SWR`) pipes single socketed in any length with rubber rings joints laid in trenches or in floors with leakproof joint as per manufacurerer instructions complete all as specified.

S&F 110 mm dia PVC (SWR`) vent cowl complete all as specified.

S&F 110mm bore PVC (SWR) 'P' or 'S' trap fixed with leakproof joint as per manufacurerer instructions complete all as specified.

S&F 110mm bore PVC (SWR) bends any radius with oval access door, fixed with leakproof joint as per manufacurerer instructions complete all as specified.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, fixed with leakproof joint as per manufacurerer instructions complete all as specified.

S&F grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap complete all as specified and directed.

S&F PVC connection of 15mm dia 45cm length including two PVC PTMT nuts at ends with rubber washer complete all as specified and directed.

S&F Pillar taps, fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, complete all as specified and directed.

M&L for brick work with with sub class 'B' brick, straight or curved on plan to any radius half brick thick honey comb walling built in In cement mortar 1:4 complete all as specified and directed.

M&L for broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

M&L Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles n. exc 5 kg complete all as specified and directed.

M&L for Plain cement concrete 1:4:8 type D-2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

M&L for Salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed as specified in 150mm internal dia of pipe grade 'A' complete all as specified and directed.

Cutting salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar(1:1) 150mm internal dia of pipe complete all as specified and directed.

S&F in repairs Salt-glazed stoneware gully traps, square or round mouthed, type `P', 'q' or 'S' of size 150x150 including for conecting to drains and setting in cement mortar 1:1 complete all as specified and directed.

SCHEDULE 'A' PART-II (E/M WORKS)

M&L for concealed point wiring One light point or one fan point controlled by one switch with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes, readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200mm x 300mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface all as specified and directed.

All as per item No 95.00 here-in-before but One 3 pin socket outlet, 6 Amp on independent board all as specified and directed.

All as per item No 95 here-in-before but One 3 pin socket outlet, 6 Amp on same board all as specified and directed.

All as per item No 95.00 here-in-before but for one 15 Amp 3 pin switch socket outlet, independent with 2.5Sqmm single core multi-stranded copper conductor cable (FRLSH) along with 2.5sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire complete all as specified and as directed.

M&L for point wiring for One light point/one fan point controlled by one switch with 1.5 Sqmm FRLSH PVC insulated unsheathed single core multistranded copper conductor cables 1100 Volts grade drawn through and including PVC casing capping along with 1.5 sqmm FRLSH continuous PVC insulated unsheathed single core multistranded copper conductor cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes, with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc complete all as specified abd directed.

S&F Switch piano, flush type single pole, one way 6 Amp complete all as specified and directed.

S&F socket outlet 5 pin, 6 Amp, flush typecomplete all as specified and directed.

S&F Switch socket combination multipurpose 2 in 1, 6Amp flush type complete all as specified and directed.

S&F Switch socket combination multipurpose 3 pin 16A and one 3 pin 6Amp 5 in 1 flush type complete all as specified and directed.

S&F Ceiling rose, 3 way PVC insulated body complete all as specified and directed.

S&F LED Tube Light luminaries with high performance LED with driver 1 x 18W (4 Feet long, Cool day/Warm white) complete with all accessories internally pre-wired and including connection two core twisted flexible copper conductor cable all as specified and directed. (Make;- Crompton / Havells / Philips)

S&F LED Tube Light luminaries with high performance LED with driver 1 x 9W (2 Feet long, Cool day/Warm white) complete with all accessories internally pre-wired and including connection two core twisted flexible copper conductor cableall as specified and directed. (Make;- Crompton / Havells / Philips)

S&F wall security LED light luminaire fitting 1X20W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clam made out of MS flat of size 25X3 mm, 4 nos Anchor Bolt of suitable size etc all as specified and directed. (Make;- Crompton / Havells / Philips)

S&F Exhaust Fan made of sturdy Engineering plastic with louvers of Size 250mm sweep, 230Volts AC, 50 Hz, 1200RPM, copper winding with connection from existing ceiling rose complete all as specified and diercted.

S&F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed. (Make: ABB/Legrand/Havells/Scheinder)

S&F Sheet metal enclosure for MCB DB double door single pole & Neutral 4 way with common bus bar at incomming end complete all as specified and directed. (Make: ABB/Legrand/Havells/Scheinder)

S&F MCB 'C' series single pole & neutral 6 to 32 Amps, breaking capacity 10KA, complete all as specified and directed. (Make: ABB/Legrand/Havells/Scheinder)

S&F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. (Make: ABB/Legrand/Havells/Scheinder)

M & L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 16 Sqmm 2 core laid in trench/pole/on wall completer all as specified and directed.

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness complete all as specified and as directed.

Material and labour well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and directed.

M&L for 40mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron earth lead wire 4.00 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron or steel, GI earth wire protected by 15mm bore light grade GI pipe and other end connected to earthing test point or main switch board as directed including funnel with watering pipe of 20mm bore light grade GI, wire mesh, charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrode PCC (1:3:6) type C-1 earth pit, cast iron cover and frame, including necessary excavation and earth work and refilling of black soil good conductor of earth and necessary testing complete all as specified and directed and shown on electrical plate No 3 of MES Schedule Part-I complete all as specified and as directed.

S&F Exhaust Fan steel body with louvers of Size 300mm sweep, 230Volts AC, 50 Hz, 1200RPM, copper winding with connection from ceiling rose including making a hole on wall for fixing of exhaust fan ang making good surface complete all as specified and diercted.

S&F single pole and neutral enclosure with a two pin and earth plug socket with single pole one MCB of 10 amp complete all as specified and directed.

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawninto PVC casing- caping complete with fittings all as specified and directed. Note :- (a) PVC casing- caping shall be included in same rate. (b) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

Supply, installation & testing Geyser 25 ltr capacity vertical type with BEE 5 star rating, having working pressure 8.0 Kg/cm² (max), electric water heater with ABS cover outer body 3mm EPAC (Engineered Polymer Anti Corrosion) coated inner tank to suit any kind of water, interchangeble colour panel, vitreous enamel coated incoloy heating element for long life, adjustable capilary thermostat for temparature regulation, multifunctional safety valve, hot and cold water CP flexible pipe etc and fixing along the wall complete all as specified and directed. (Make:- USHA/Recold / Havells / Bajaj)

Supply, installation & testing Geyser 50 ltr capacity vertical type with BEE 5 star rating, having working pressure 8.0 Kg/cm² (max), electric water heater with ABS cover outer body 3mm EPAC (Engineered Polymer Anti Corrosion) coated inner tank to suit any kind of water, interchangeble colour panel, vitreous enamel coated incoloy heating element for long life, adjustable capilary thermostat for temparature regulation, multifunctional safety valve, hot and cold water CP flexible pipe etc and fixing along the wall complete all as specified and directed. (Make:- USHA / Recold / Havells / Bajaj)

Cutting existing steel tubing for alternation or addition and screwing steel tubing for alterantion or addition lengthening screw on pipe to form connector of size 15mm dia complete all as specified and directed.

S&F tubes medium grade galvanised with all fittings laid in trenches of size 15mm dia complete all as specified and directed.

S&F stop valve cast copper allow screw down high pressure with crutch or butterfuly handle screwed both end from iron pipe or for union and fixed of size 15mm dia complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F bib taps cast copper alloy with crutch or butterfly handle screwed for brass ferrule and fixed of size 15mm dia complete all as specified and directed.

GURUNG CONSTRUCTION

MUKHERJEE ENTERPRISE

SRI A B SEN

T K GANGULY

PRADIP KUMAR BOSE

M/S BISWAJIT BHATTACHARJEE

M/S BOSE CONSTRUCTION