EDCH-80/2024-25

Amount

Supply of Following Matarial as per relevent ISS

Stone Pad

Cross Arm holding Clamp

Clamps for Double Pole with Nut & Bolt

F-Braket

Holding Clamp for Tee Channel

Nut, Bolt & Washer

Earthing Complete

Guarding Angle, Nut Bolt with eye bolt Complete

AL LUG 400 sqmm

Copper L-Piece

LT Incoming Panel with Metering equipment

Pearcing Connector

Distribution Box with Clamp

Danger Board With Clamp

Barbed Wire

Suspension Clamp

Dead End Clamp

Clamp for Top & Dropper

Safe Carriage of following material from Electricty store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)

Pcc Pole 8.5 Mtr. Long

STP Pole 11 Mtr. Long

11 KV Cross Arm

11 KV Pin Insulator

11 KV Pin with Nut

11 KV Disc Insulator

11 kv Disc Fitting

H.T Tee Channel

ACSR Dog Conductor

Stay set Complete

G.I Wire 6 SWG

G.I Wire 8 SWG

M.S Top Channel

Dropper Channel

11 KV Fuse Set

11 KV TPMO

T/F 11/.04 Kv, 250 KVA New

LT PVC Cable AL 3.5*400 sqmm

Cable Jointing Kit Suitable For 3x300 sqmm 11 kv Cable

3x300 sqmm 11 kv Cable

Arreal Bunch Conductor

Errection of following Poles with grouting including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

8.5/9 Mtr PCC Pole

STP Pole 11 Mtr. Long

Fixing/ Errection of following item, cost of labor, material and T&P which required for completion of work

Stone Pad

Cross Arm holding Clamp

Clamps for Double Pole with Nut & Bolt

F-Braket

Holding Clamp for Tee Channel

Nut, Bolt & Washer

AL LUG 400 sqmm

Copper L-Piece

LT Incoming Panel with Metering equipment & Fixing Arrangement

Pearcing Connector

L.T Distribution Box

Danger Board With Clamp

Barbed Wire

Suspension Clamp

Dead End Clamp

Clamp for Top & Dropper

11 KV Cross Arm

11 KV Pin Insulator

11 KV Pin with Nut

11 KV Disc Insulator

11 kv Disc Fitting

H.T Tee Channel

M.S Top Channel

Dropper Channel

11 KV Fuse Set

11 KV TPMO

Cable Jointing Kit Suitable For 3x300 sqmm 11 kv Cable

Installation of 250 KVA T/F on newly/Old constructed Plinth in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required for completion of work

Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.

Laying, sagging and stringing and jumpering / binding etc. of new & old ACSR Weasal conductor / GI in 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.

ACSR Dog Conductor

LT PVC Cable AL 3.5*400 sqmm

3x300 sqmm 11 kv Cable

Arreal Bunch Conductor

Construction of plinth of size 2*2*1.5 mtr above ground level one ft below the ground level of 9" After Exavation of 4 "earth brick ballast shall be provided and rammering will be done properly After ballast shall be provided and rammering will be done properly After that a retaining wall 9"width by fist class brick in ratio 1:4 of cement & sand shall be made . The earth shall be filled up to one ft.below the top of the plinth After this brick ballast shall be provided upto 6"from the earth level and proper rammering shall be done one No. jall of 12 mm MS tor shall be fixed in the hollow of plinth and one ft. thick RCC in ratio of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand.

Pipe earthing of 250/400 KVA medium Power Transformers

Net Fencing of 250/400 KVA medium Power Transformers

Re Guarding/Guarding of 11 KV line by laying, stringing, sagging and binding of 2 Nos. parallel GI wire 6 SWG after providing, fabrication and fixing of guarding angle and fabrication and fixing of X-guards (Tillis) of GI wire at distance of 3 Mtr.

Dismentalling of old & used STP Pole

Underground Laying of 11 KV XLPE Cable as per RESPO manual and as per direction of supervising engineer.

Dismentalling of old & used STP Pole Material

Back Cartage of Following Matarial

ACSR Weasel Conductor Scrap

STP Pole Scrap

Iron Scrap

XLPE Cable Scrap

GARG ENTERPRISES (BID ID -4915687)

GOSWAMI ENTERPRISES (BID ID -4921401)