Cons. and Imp. of Footpath(K.B.Road-From Doss and Co.to Gitarthi Point)Providing Shaded Tiles and Railing under City Infra Development Fund(CIDF)for Jorhat Town for the year2019-20under PWD Jorhat State Road Division,Jorhat.Pkg.No. CIDF/JDTTRD/JOR/01

Amount

5.11.1.Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.VITRIFIED. Somany made- Durastone (Unpolished heavy duty Vitrified Tiles) (b)Deluxe i)Normal range (Sizes 300 mm x 300mm and above)

Wrought Iron and Mild Steel Welded Work (Wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc.including cost of screens and welding rods or bolt and nuts complete fixed in position but without the cost of excavation and concrete for mixing which will be paid separately.

Excavation in Soil by Manual Means. (a) (Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 metres.)

Plain /Reinforced cement in open foundation complete as per drawing & technicla specifications as MoSRT&H, 1500, 1700, 2100 RCC grade M20 using concrete mixure

Supplying,fittingandplacingTMT IS:1786(Fe500)barreinforcementin sub-structure complete as per drawing and technical specifications.TMT-IS 1786 ( Fe-500 D) Secondary Producer (ISI approved)

Painting Two Coats on New Concrete Surfaces' Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with alluminium paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.(a).Surfaces over 100mm in width or girth.b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. B. Mechanical Means I) In ordinary soil, with dewatering, (i) Depth up to 3.00m

Sand Filling in Foundation Trenches as per Drawing & Technical Specification

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.

PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Plain/Reinforced cement concrete, in open foundation complete as per drawing and technical specification including steel shuttering formwork.(N) Without plasticiser, (C) RCC Grade M20, Case I : - Using concrete Mixer

Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork (N) without plasticiser, (E) RCC M20, (a) Height upto 5.0m, Case I : Using concrete mixer

Plain/Reinforced cement concrete, in super structure complete as per drawing and technical specification and steel shuttering formwork (N) without plasticiser, (E) RCC M20, (a) Height upto 5.0m, Case I : Using concrete mixer

Supplying, fitting and placing TMT bar reinforcement in foundation complete as per drawing and technical specifications (c) With other make ISI marked TMT rebar

Supplying, fitting and placing TMT bar reinforcement in sub-structure complete as per drawing and technical specifications (c) With other make ISI marked TMT rebar

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification (ii) With sandy material

N K Construction and Suppliers