Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.7 LAccepted-AOC 67 MANNUGANJ HAKIKAT RAI NAGAR DEHRADUN 248001 UK | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC ACEEPTED BEING LOWEST TENDER | |
| 2 | L2₹13.9 L+₹1.0 L (8.06%)Rejected-AOC G 1 803 MAYA GARDEN CITY AMBALA HIGHWAY NAGLA ROAD ZIRAKPUR DISTT MOHALI PUNJAB 140603 | ZIRAKPUR | MOHALI | PUNJAB | 140603 | L2 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER | |
| 3 | L3₹15.0 L+₹2.1 L (16.1%)Rejected-AOC | L3 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER | |
| 4 | L4₹16.4 L+₹3.5 L (26.8%)Rejected-AOC | L4 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER |
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
2 Dec 2022, 6:00 pmClosed
GE I RND DEHRADUN
GE I RND DEHRADUN DEAL RESIDENTIAL COMPLEX RAIPUR ROAD DEHRADUN 248008
REPAIR/ PAINTING AND POLISHING OF WOODEN AND STEEL FURNITURE AT DEAL IRDE AND CQA(I) RAIPUR UNDER GE(I) RND DEHRADUN
2022_MES_562598_1
GE(I)RND/9202/E8/22-23
Open Tender
Miscellaneous Works
Item Rate
180 days
DEAL DEHRADUN
Class E Category D (i) FOR UNENLISTED CONTRACTOR (i) Enlistment criteria may be seen in Para 1.4 and 1.5 of section of Part I of MES Manual on contracts-2020 as available in all MES formations (ii) Copy of police verification /passport.
6 documents required · 6 mandatory
₹500
Yes
GE I R N D DEHRADUN
₹36,000
Yes
2 Jan 2023
11 Nov 2022
5 Dec 2022
11 Nov 2022
2 Dec 2022
18 Nov 2022
11 Nov 2022 - 18 Nov 2022
Amount
Replacement of following old broken unserviceable parts with new parts of Sofa Set 5 Seats/3 Seats. FD-281, FD-373, FD/MAP-II/02
Removing the existing u/s covers from detachable foam cushion and S&F new cover made out of superior quality tapestry cloth of approved quality (locally available), not less than Rs. 550/-per meter) duly stitched as per size of seat & one side be stitched with zip chain of approved quality complete all as specified & shown on drgs & approved by GE
S&F foam cushion 100mm thick and 40density, size 22”x21”x4” duly covered with new tapestry cloth & duly stitched as per size of seat & one side be stitched with zip chain (of approved type/ design/colour) (not less than Rs. 550/- per mtr) of appropriate quality fixed as in repairs complete all as shown on drawing, specified & directed by Engr-in-charge, approved by GE.
Front legs made of 1st class teak wood complete all as specified and directed
Rear legs made of 1st class teak wood complete all as specified and directed
Batton from Sofa set 04/05seater made of 1st class teak wood complete all as specified and directed
Long Rails made of 1st class teak wood complete all as specified and directed
Hand Rest Rails made of 1st class teak wood complete all as specified and directed
Short Rails made of 1st class teak wood complete all as specified and directed
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness Sofa Set 05 Seatercomplete all as specified and directed.
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness Sofa Set 03 Seatercomplete all as specified and directed.
Sofa cushion foam 21" x 22" & 95 mm thick Make of Sleepwell/denlop/kurlon 40 density FD 281
Sofa cushion foam 75 mm thick and 32 density all as specified as directed.
Wodden fillets made of 1st class teak wood complete all as specified and directed
Replacement of following old broken unserviceable parts with new parts of TABLE BED SIDE FD-210, FD-248, FD- 276
Top of table bed side made up of 18/19 mm thick pre- laminated MDF board of shade bavarian beech exterior grade of size 450x350mm.
Sides of table bed side made out of 18/19mm thick MDF board of shade bavarian beech exterior grade of size 450x300mm
Ply wood back made out of 6mm thick commercial plywood of table bed side of required size
Shelf/base of table bed side made out of 18/19mm MDF board exterior grade
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness complete all as specified and directed.
Replacement of following old broken unserviceable parts with new parts of TABLE CENTRE:FD-29(M), FD-134(M), FD-152(M), FD-235, FD-274,FD-393
Table Top shall be 18/19mm thick MDF board exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly shade shal be Bavarian Beech screwed. Edging all round the top shall be of 4mm teakwood
Legs made of 1st class teak wood complete all as specified and directed.
Long Rails made of 1st class teak wood complete all as specified and directed
Short Rails made of 1st class teak wood complete all as specified and directed
Stuffeners made of 1st class teak wood complete all as specified and directed
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness complete all as specified and directed.
Replacement of following old broken unserviceable parts with new parts of TABLE PEG:FD-25(M), FD-236, FD-266, FD-277, FD-384
Table Top made of 18/19 mm thick MDF board exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly shade shal be Bavarian Beech screwed. Edging all round the top shall be of 4mm teakwood.
Legs made of 1st class teak wood complete all as specified and directed.
Long Rails made of 1st class teak wood complete all as specified and directed
Short Rails made of 1st class teak wood complete all as specified and directed
Stuffeners made of 1st class teak wood complete all as specified and directed
French Polishing to Table peg
Replacement of following old broken unserviceable parts with new parts of TEAPOY WOODEN/FD:FD-34(M), FD-232, FD-278, FD-382
Top table made of 18/19mm thick MDF board exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly shade shal be Bavarian Beech screwed. Edging all round the top shall be of 4mm teakwood.
Legs made of 1st class teak wood complete all as specified and directed.
Long Rails made of 1st class teak wood complete all as specified and directed
Short Rails made of 1st class teak wood complete all as specified and directed
Stuffeners made of 1st class teak wood complete all as specified and directed
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness complete all as specified and directed.
Replacement of following old broken unserviceable parts with new parts of TABLE DRESSING LADIES FD-32 (M), FD-251, FD-378 DB-1980
Mirror table dressing ladies of size 1220 x 365 x 5 mm thick, duly fixed with frame as per drg.
Top table made of plastic laminated sheet 1.00mm thick duly fixed with synthetic adhesive as per drg
Glass shutters duly fixed with new aluminium channels as per drg.
Drawer with knobs made of MDF board 18/19 mm thick for sides and 6 mm thick ply wood commercial ISI marked for bottom including chromium plated knobs as per drg.
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness complete all as specified and directed.
Taking out existing unserviciable top of ladies dressing table, supply and fix new dressing table top with 18 mm thick exterior plywood confirming to IS 303 BWR gde all as specified as directed and shown in drg FD 251, FD 378 & DB 1980
Taking out existing unserviciable bottom of ladie dressing table, supply and fix new dressing table top with 18 mm thick exterior plywood confirming to IS 303 BWR gde all as specified as directed and shown in drg FD 251, FD 378 & DB 1980
Replacement of following old broken unserviceable parts with new parts of TABLE DRESSING GENTS.FD-31(M), FD-230, FD-379, FD-290
Mirror 760x365x5mm thick, duly fixed with frame as per drg
New plastic laminated sheet 1.00 mm thick of on top duly fixed with synthetic adhesive as per drg
Drawer & knobs made of Teak Wood 12mm thick MDF board for side and 6mm thick ply wood commercial for bottom including knobs CP as per drawing
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness complete all as specified and directed.
Taking out existing unserviciable top of gents dressing table, supply and fix new dressing table top with 18 mm thick exterior plywood confirming to IS 303 BWR gde all as specified as directed and shown in drg FD 290M
Taking out existing unserviciable bottom of gents dressing table, supply and fix new dressing table top with 18 mm thick exterior plywood confirming to IS 303 BWR gde all as specified as directed and shown in drg FD 251, FD 378 & DB 1980
Replacement of following old broken unserviceable parts with new parts of HAT STAND WITH MIRROR SMALL/LARGE FD-23(M), FD-206, FD-233, FD-361, FD-362
Ply wood 3.5mm thick one side Teak Face all as directed by Engineer-in-Charge and as per drg. 4mm thick teak wood edging shall be provided ISI marked
Metal pegs (CP) all as directed by Engineer-in-Charge and as per drg.
4mm thick new mirror all as directed by Engr-in-Charge and as per drg.
Ply wood back 6 mm thick commercial ISI marked duly French polished all as per drg
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness complete all as specified and directed.
Replacement of following old broken unserviceable parts with new parts of TABLE DINING 8 PERSONS:FD-30(M), FD-239, FD-273, FD-376
Top table made of shall be 18mm thick MDF board as approved by GE, conforming to IS-12823 Grade-I type-II exterior grade duly screwed shade shal be Bavarian Beech. Edging all round the top shall be of 4mm teak wood
Legs made of 1st class teak wood complete all as specified and directed.
Long Rails made of 1st class teak wood complete all as specified and directed
Short Rails made of 1st class teak wood complete all as specified and directed
Stuffeners made of 1st class teak wood complete all as specified and directed
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness complete all as specified and directed.
Replacement of following old broken unserviceable parts with new parts of TABLE DINING 6 PERSONS:FD-30(M), FD-239, FD-269, FD-273
Top table made of 18/19mm thick MDF board as approved by GE conforming to IS-12823 Grade-I type-II exterior grade duly screwed shade shal be Bavarian Beech. Edging all round the top shall be of 4mm teak wood
Legs made of 1st class teak wood complete all as specified and directed.
Long Rails made of 1st class teak wood complete all as specified and directed
Short Rails made of 1st class teak wood complete all as specified and directed
Stuffeners made of 1st class teak wood complete all as specified and directed
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness complete all as specified and directed.
Replacement of following old broken unserviceable parts with new parts of TABLE 900X900X760MM:FD-88(M), FD-94(M), FD-291, FD-352
Top table made of 18/19mm thick MDF board as approved by GE conforming to IS-12823 Grade-I type-II exterior grade duly screwed shade shal be Bavarian Beech. Edging all round the top shall be of 4mm teak wood.
Legs made of 1st class teak wood complete all as specified and directed.
Long Rails/ short Rails made of 1st class teak wood complete all as specified and directed
Stuffeners made of 1st class teak wood complete all as specified and directed
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness complete all as specified and directed.
Replacement of following old broken unserviceable parts with new parts of Table 4'x3' (1200x900) MM FD-273
Top table made of 18/19mm thick MDF board as approved by GE conforming to IS-12823 Grade-I type-II exterior grade duly screwed shade shall be Bavarian Beech. Edging all round the top shall be of 4mm thick teak wood. All exposed faces of timber shall be treated with french polish as directed by the Engr-in-charge.
Legs made of 1st class teak wood complete all as specified and directed.
Long Rails made of 1st class teak wood complete all as specified and directed
Short Rails made of 1st class teak wood complete all as specified and directed
Stuffeners made of 1st class teak wood complete all as specified and directed
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness complete all as specified and directed.
Replacement of following old broken unserviceable parts with new parts of TABLE 900X600X760MM (WITH AND WITHOUT DRAWER) FD-41(M), FD-42(M), FD-55(M), FD-223, FD-224, FD-283, FD-284
Top table made of 18/19mm thick MDF board as approved by GE conforming to IS-12823 Grade-I type-II exterior grade duly screwed shade shal be Bavarian Beech. Edging all round the top shall be of 4mm teak wood
Legs made of 1st class teak wood complete all as specified and directed.
Long Rails made of 1st class teak wood complete all as specified and directed
Short Rails made of 1st class teak wood complete all as specified and directed
Stuffeners made of 1st class teak wood complete all as specified and directed
Drawer made of 12mm plywood duly fixed the S/S Knobs etc.complete all as specified and directed
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness complete all as specified and directed.
Supply and Fixing in repair 15mm Dia PVC Bush on the legs of Table with 10mm long S/S Screw (various types and Drgs) small sizes
Supply and Fixing in repair 20mm Dia PVC Bush on the legs of Table with 15mm long S/S Screw (various types and Drgs) Large sizes
M&L Spray painting two coat of synthetic enamel Paint hammar tone of any colour / any shed as approved by GE and Engineer in charge on old painted surface with high class finish, including necessary scrapping, denting, smoothness the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/holes /bore holes etc with paste filler to under mentioned items complete all as specified & directed
Almirah large steel with shelves and Almirah half hanging & half shelves (Complete internal and external surface) FD-67(M),FD-104(M), FD-114(M),FD-351, FD-389,FD-1031, FD-1033, FD/E6/MAP/18
Almirah steel Medium with shelves and Almirah steel small half hanging & half shelves (Complete internal and external surface) FD-67(M),FD-114(M), FD-115(M),FD-243, FD-350,FD-1032, FD-1034
Almirah large steel with shelves and Almirah half hanging & half shelves (Complete internal and external surface) FD-67(M),FD-104(M), FD-114(M),FD-351, FD-389, FD-1031,FD-1033, FD/E6/MAP/18
Almirah steel Medium with shelves and Almirah steel small half hanging & half shelves (Complete internal and external surface) FD-67(M),FD-114(M), FD-115(M),FD-243, FD-350, FD-1032,FD-1034
Book Shelf open small/Large steel/Book case steel/cabinet Map steel (Complete internal and external surface) FD-90(M),FD-1028, FD-397
Table office officer steel (Complete internal and external surface) FD-84,FD-1002, FD-1003, FD-67
Table office Clerk Steel (Complete internal and external surface) FD-84,FD-1004
Book case steel / cabinate filing (Complete internal and external surface). FD-1028
Locker bed side steel (Complete internal and external surface). FD-127,FD-1029
Table dining OR’s steel/Table 1520x860x760mm steel (Complete internal and external surface) FD-165(M),FD-90(M), FD-1010
Table table 3x2 with & without drawers steel and Table 3'x3' steel (Complete internal and external surface) FD-142(M),FD-1009, FD-1014,FD1006, FD-1007,FD-1008
Rack six tier Steel / four tier steel. FD-129(M),FD-1038
Rack shoes steel FD/E6/MAP/02(R)
Stool steel 305x305x510 mm FD 81(M),FD-409
Chair CB steel with out arm FD-75 (M)
Rack steel 6 tier FD-106 (M)
Rack steel 6 tier FD-106 (M)
Large steel W/shelves glazed FD-104 (M).
Replacement of following old broken unserviceable parts with new parts of Almirah large Steel with Shelves/Almirah (L) Steel half hanging & half Shelves FD-67(M),FD-104(M), FD-114(M),FD-351, FD-389,FD-1031, FD-1033, FD/E6/MAP/18
Hinges of existing shape and size through gas welding complete all as specified and directed
Lock of 7lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed
Chromium Plated handle of existing shape and size complete all as specified and directed
Legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed
Shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed
Shelves made out of MS sheet 1.00 mm thick of existing shape and size complete all as specified and directed
MS clamps of suitable pattern to the shelves to hold shelves of existing shape and size complete all as specified and directed
Brass Bush Barrel of suitable pattern to the locking system of Almirah steel of existing shape & size complete all as specified & directed
3way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel of existing shape and size complete all as specified and directed
Replacement of following old broken unserviceable parts with new parts of Almirah Steel Medium/Small with shelves: FD-67(M),FD-114(M), FD-115(M),FD-243, FD-350,FD-1032, FD-1034
Hinges of existing shape and size through gas welding complete all as specified and directed
Lock of 7lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed
Chromium Plated handle of existing shape and size complete all as specified and directed
Legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed
Shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed
Shelves made out of MS sheet 1.00 mm thick of existing shape and size complete all as specified and directed
MS clamps of suitable pattern to the shelves to hold shelves of existing shape and size complete all as specified and directed
Brass Bush Barrel of suitable pattern to the locking system of Almirah steel of existing shape & size complete all as specified & directed
3way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel of existing shape and size complete all as specified and directed
M&L for replacement of damaged/unserviceable cleat iron including one coat of red oxide primer for almerah steel large/med/small with approriate size and shape to match the exisiting and shape to match the exisitng one all as directed by Engr-In-charge FD-67 (M), FD-1032
M&L for steel shoe frame made out of 1 mm thick MS sheet, size and shape maching with existing including welding to almerah large/medium and one coat of red oxide primer.
M&L for replacement of old broken/damged and unserviceable lock steel (5 lever) with duplicate key of table office, officer, clerk steel and table 3 x 2 feet with drawer steel,of appropriate size and shape to match the exisiting all as specified as directed by Engr-In-Charge. FD-84(M) FD-1003(M)
M&L for repalcement of old broken/damged and unserviceable legs/stiffener made of MS tube 25x25, 1.6 mm thick including one coat of red oxide primer of table office, officer, clerk steel and table 3 x 2 feet with drawer steel with and including approriate size and shape to match the exisitng all as specified as directed by Engr-In-Chage. FD-84(M), FD-1004(M)
Replacement of following old broken unserviceable parts with new parts of Book Case Steel 66"x33"x2' with glass FD-90(M),FD-1028,
Glass plain, size of 76cm x 22cm x 5mm plain glass of existing shape and size complete all as specified and directed
Lock of 4 lever with duplicate key of fancy type of existing shape and size complete all as specified and directed
Handle chrominium plated of existing shape and size complete all as specified and directed
Replacement of following old broken unserviceable parts with new parts of Table office clk steel FD-84,FD-1004
Top made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI OSL of existing shape & size complete all as specified and directed. Edging all round the top shall be 4mm teak wood duly polished & finished
Drawer made out of MS Sheet of existing shape and size complete all as specified and directed & including fixing with 02 Nos of suitable sliding channels.
Legs of required shape & size as per drg direction by Engr-in-Charge.
Replacement of following old broken unserviceable parts with new parts of Table 3'x2' Steel with drawer and w/o drawer FD-1006, FD-1007,FD-1008
Top made of 18/19mm prelaminated MDF board exterior Grade ISI OSL of existing shape and size complete all as specified and directed. Edging all round the top shall be 4mm teak wood duly finished and polished. Prelaminated MDF board shade colour shall be bararian beech as per directed by Engr-in-Charge
Drawer made of MS Sheet of existing shape and size complete including fixing with 2Nos of suitable sliding channels all as specified and directed
Legs of required shape & size as per drg direction by Engr-in-Charge
Replacement of following old broken unserviceable parts with new parts of Table 3'x3' steel FD-142(M),FD-1009, FD-1014
Top made of 18/19mm prelaminated MDF board exterior Grade ISI OSL of existing shape and size complete all as specified and directed. Edging all round the top shall be 4mm teak wood duly finished and polished. Prelaminated MDF board shade colour shall be bararian beech as per directed by Engr-in-Charge.
Legs of required shape and size as per drg as directed by Engr-in-Charge
Replacement of following old broken unserviceable parts with new parts of Table office officer steel FD-84,FD-1002, FD-1003
Top made of 18/19mm prelaminated MDF board exterior Grade ISI OSL of existing shape and size complete all as specified and directed. Edging all round the top shall be 4mm teak wood duly finished and polished Prelaminated MDF board shade colour shall be bararian beech as per directed by Engr-in-Charge.
Steel drawer made of MS Sheet of existing shape & size complete all as specified & directed, including fixing with 02Nos of suitable sliding channels
Legs of required shape & size as per drg direction by Engr-in-Charge
Welding of broken steel furniture (Steel items of various drgs) FD-243,FD-1032, FD-1046,FD-1004, FD-1008,FD-1007, FD-562,FD-1014, FD-362,FD-1003, FD-75,FD-165(M), FD-75(M),FD-256
Gas Welding point (01 inch) on Broken part of steel furniture shall be carried out such as Almirah large steel with shelf/Wo shelf and Half hanging, Almirah med steel/small with shelf, Locker bed side steel, Table office clk steel, table 3'x2' steel w/d, Locker SKD 562 of chair CB steel with arms/ without Arms, chair verandah, table dining, table office, officer/clerk steel, chair easy steel, teapoy verandah & Steel items of various drgs etc. welding shall be done continuously type, including rubbing and finishing to smooth surface
Replacement of following old broken unserviceable parts with new parts of TEAPOY VARANDAH FD-35(M),FD-208, FD-255,FD-383
Top of size 900x450x18mm for teapoy verandah. Top shall be 18/19 mm thick MDF board exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly shade shal be Bavarian Beech screwed. Edging all round the top shall be of 4mm teakwood. steel frame should be painted with 02 coats of white paint shall be done on entire frame of teapoy varandha as per directed by Engr-in-charge.
Replacement of following old broken unserviceable parts with new parts of ply top charpoy GI FD-220
Plywood 12mm thickness plywood top of size 1980x900 mm exterior grade BWR type (Nos of ply 7) ISI marked fixed with flat/dome head MS galvanished iron carriage bolts. The edge of plywood shall be smoothened alround & corner shall be rounded to a radious of 1cm iron carriage, 10Nos of round headed bolts with nut & washer of size 5x75mm after drilling the holes at equal distance on rails (03Nos on each long rail & 02Nos on each Short Rails) as per shown on drg all as directed by the Engr-in-Charge.
Long rail made out of GI Pipe 32mm nominal dia Med Grade duly threaded at oth end upto 45mm & all as directed by the Engr-in-Charge Note : U/S long rails be converted into 01 short rail & 1leg & measured in Sch No. 260.03 & 26.04
Fixing only Short rail retrieved and made out from schedule No 26.02 duly threaded at both end upto 45mm & all as directed by the Engr-in-Charge Note: U/S Short rails be converted into 01leg and measured in Sch 26.04
Fixing only legs retrieved made out from old long rails/short rails, retrieved under item Sl No 26.02 & 26.03 here in before duly threaded at one end upto 45mm and all as directed by the Engr-in-Charge
Long rails, short rails and legs of 32mm dia GI Pipe upto 45mm and assembling to make a charpoy frame complete as shown on drawing and as directed by Engr-in Charge. Note: Old existing loose long rails, short rails and legs shall be issued to the Contractor for re-threading and assembling it to make a charpoy frame
Elbow GI 3Way 32mm Med Grade ISI marked of existing shape and size complete all as specified & directed
Elbow check nut 32mm Med Grade ISI marked of existing shape and size complete all as specified & directed
Replacement of following old broken unserviceable parts with new parts of Chair CBA Special with hand rest FD-120
20mm thick TW Back Frame duly canned with plastic cane 2mm caning godraj pattern of existing shape and size complete all as specified & directed
20mm thick TW seat Frame duly canned with plastic cane 2mm godrej pattern of existing shape and size complete all as specified & directed
20mm thick plank fixed with required size & shape of round tube fixed as in repairs as shown on drg and of existing shape and size complete all as specified & directed
20mm Arms, made out of seasoned hard wood, Shisham duly painted with synthetic enamel black paint and shall be fixed with steel screws of existing shape and size complete all as specified & directed
Re-canning of chairs Varandah FD-19(M),FD-256, FD-259,FD-359
Plastic cane of 3/4mm semi round, white colour, best quality of approved including painting with two coats of white synthetic enamelled paint on entire steel/iron surfaces of chair before recaning & including provn of new PVC shoes 20mm dia at bottom of legs after taking out old shoes all as specified including all material & labour, canning shall be done in Matt pattern
Replacement of following old broken unserviceable parts with new parts of Chair CB Steel with Arms/Chair Steel tabular with Arms FD-75 (M)
Seat of existing shape and size made from seasoned hardwood (Shisham) duly caned with 02mm semi/half round plastic cane of white colour as per Godrej pattern and frame of seat shall be finished/painted with black colour synthetic enamel paint complete all as specified & directed
Back of existing shape and size made from seasoned hardwood (Shisham) duly caned with 02mm semi/half round plastic cane of white colour as per Godrej pattern and frame of seat shall be finished/painted with black colour synthetic enamel paint complete all as specified & directed
Painting to steel frame chairs CB steel with one coat of olive green enamelled paints of approved brand.
Arms of existing shape and size made out of seasoned hard wood, Shisham duly painted with synthetic enamel black paint and shall be fixed with steel screws complete all as specified & directed
25x5mm flat iron support 50mm long 4Nos each chair under bottom of seat welded with frame complete all as specified and directed
Replacement of following old broken unserviceable parts with new parts of Chair CB Steel without Arms/Chair Steel tabular without Arms FD-75 (M)
Seat of existing shape and size made from seasoned hardwood (Shisham) duly caned with 2mm semi/half round plastic cane of white colour as per Godrej pattern and frame of seat shall be finished/painted with black colour synthetic enamel paint complete all as specified & directed
Back of existing shape and size made from seasoned hardwood (Shisham) duly caned with 2mm semi/half round plastic cane of white colour as per Godrej pattern and frame of seat shall be finished/painted with black colour synthetic enamel paint complete all as specified & directed
Painting to steel frame chairs CB steel with one coat of olive green enamelled paints of approved brand.
25x5mm flat iron support 50mm long 4 Nos each chair under bottom of seat welded with frame complete all as specified & directed.
15/20/25mm Dia PVC/Rubber Bush on the legs of Table (various types and drgs) small & large sizes
Replacement of following old broken unserviceable parts with new parts of CHAIR DINING. FD-16(M),FD-203, FD-228,FD-279
Front legs made of 1st class teak wood complete all as specified and directed
Rear legs made of 1st class teak wood complete all as specified and directed
Front/back rails made of 1st class teak wood complete all as specified and directed
Side rails made of 1st class teak wood complete all as specified and directed
Tightening of Chair dining complete, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge
Stuffeners made of 1st class teak wood complete all as specified and directed
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness complete all as specified and directed.
Replacement of following old broken unserviceable parts with new parts of CHAIR EASY FD/CHAIR EASY NF FD-17(M), FD-201, FD-229,DB-4174
Front leg made of 1st class teak wood complete all as specified and directed
Rear leg made of 1st class teak wood complete all as specified and directed
Side rails made of 1st class teak wood complete all as specified and directed
Front/back rails made of 1st class teak wood complete all as specified and directed
Tightening of Chair easy compete, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
Stuffeners made of 1st class teak wood complete all as specified and directed
Hand rest made of 1st class teak wood complete all as specified and directed
French polishing to chair shall be done with high class finish including pre-paration of surfaces by proper sand papering complete all as specified & as shown on drg
Replacement of following old broken unserviceable parts with new parts of CHAIR WRITING/CHAIR CB OFFICE FD-20(M),FD-202, FD-250,FD-280
Front leg made of 1st class teak wood complete all as specified and directed
Rear leg made of 1st class teak wood complete all as specified and directed
Side rails made of 1st class teak wood complete all as specified and directed
Front/back rails made of 1st class teak wood complete all as specified and directed
Tightening of Chair writing complete, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
Stuffeners made of 1st class teak wood complete all as specified and directed
Hand rest made of 1st class teak wood complete all as specified and directed
Polishing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filer solution for smoothness complete all as specified and directed.
RE-CANNING OF VARIOUS TYPES OF FURNITURE & various items of Canned furniture FD-16(M),FD-203, FD-228,FD-279, FD-17(M), FD-201, FD-229,DB-4174, FD-20(M),FD-202, FD-250,FD-280, FD15(M),FD-27(M), FD-212,FD-244, FD-385,FD-252
M&L for removing of old/broken/ unservisable plastic cane & re-canning of chair dinnig, chair CB without arms/chair writing,chairs CB with arms,chairs writing, chair CB office, chair easy FD/NF, chair, stool dressing CB, Couch set & bin solied linen with 2 to 2.5mm semi round cane plastic of white colour and border with 3 to 4mm semi round cane plastic of white colour. Rest all as per drgs. The canning work shall be done in Godraj pattern. Cane should be in White colour (Non recycled) & make as approved
Replacement of following old broken unserviceable parts with new parts of Computer table FD/E6/MAP/03 /TP
Top of prelaminated MDF board exterior grade 18mm thick Grade-I, Type-II exterior grade of appproved make (Covered with 4mm thick teek wood/PVC beading duly polished) of existing shape & size complete to match the original as shown on drg as directed
Side of prelaminated MDF board exterior grade 18 mm thick grade-I, type-II, exterior grade of approved make of existing shape & size complete to match the original as shown on drg as directed
Keyboard of prelaminated MDF board exterior grade with sliding arrangement /telescopic rails both sides of key board of existing shape & size complete to match the original as shown on drg as directed
Drawer with sliding arrangement/ telescopic rails both sides of drawer including of 4 leaver lock as per Godrej pattern of existing shape & size complete to match the original as shown on drg as directed
Bottom cabinet of 18mm thick pre- laminated MDF board exterior grad 18mm thick grade-I, type-I of existing shape & size complete to match the original as shown on drg as directed
Replacement of following old broken unserviceable parts with new parts of Computer chair revolving/ High Back and Med Back FD/E6/MAP/01/TP
Mild steel 5 prong base of existing shape & size complete to match the original as shown on Drg as directed complete with suitable nuts & bolts to chair revolving steel of various types
Foam cushion 50mm thick & 32mm density of existing shape & size complete to match the original as shown on Drg as directed covered with new tapestry cloth (seat & back) (of approved type/ design/ colour) (Cloth shall not be less than 300/- per RM) alongwith all around suitable PVC strip duly stitched & fixing to chair revolving steel, of various types
Tapestry cloth (seat & back) (of approved type/ design/ colour) of existing shape & size complete to match the original as shown on Drg (Cloth shall not be less than 300/- per RM) alongwith all around suitable PVC strip duly stitched and fixing to chair revolving steel of various types
Black leatherite cloth (seat & back) (of approved type/design/colour) of existing shape & size complete to match the original as shown on Drg (Leathrite cloth shall not be less than 350/-per RM) alongwith all around suitable PVC strip duly stitched & fixing to chair revolving steel of various types
MS bearing of existing shape & size complete to match the original to chair revolving steel of various types as shown on Drg
Caster wheels of existing shape & size complete to match the original as shown on drg as directed with suitable nuts & bolts to chair revolving steel of various types.
Hydraulic system of existing shape & size complete to match the original as shown on drg as directed to chair revolving steel of various types
Hand rest of rubberised PVC of existing shape & size complete to match the original as shown on drg as directed with suitable nuts & bolts as to match with the existing to chair revolving steel of various types
Replacement of following old broken unserviceable parts with new parts of Chair Writing MAP/ Chair Visitor FD/E6/MAP/12 /TP
Foam cushion 50mm thick & 32mm density of existing shape & size complete to match the original as shown on Drg as directed covered with new tapestry cloth (seat & back) (of approved type/ design/ colour) (Cloth shall not be less than 300/- per RM) alongwith all around suitable PVC strip duly stitched & fixing to chair revolving steel, of various types
Tapestry cloth (seat & back) (of approved type/ design/ colour) of existing shape & size complete to match the original as shown on Drg (Cloth shall not be less than 300/- per RM) alongwith all around suitable PVC strip duly stitched and fixing to chair revolving steel of various types
Leatherite cloth (seat & back) (of approved type/design/colour) of existing shape & size complete to match the original as shown on drg (Leathrite cloth shall not be less than 350/-per RM) along with all around suitable PVC strip duly stitched & fixing to chair revolving steel of various types
Hand rest of rubberised PVC of existing shape & size complete to match the original as shown on drg as directed with suitable nuts & bolts as to match with the existing to chair revolving steel of various types
PVC Rings/Rubber shoes to chair visitor steel/ chair writing map/ chair conference hall.
Replacement of following old broken unserviceable parts with new parts of Side Board FD-26(M), FD-150(M), FD-241,FD-371, FD-372,FD-391, FD-1112
Shelves made out of 12mm plywood of existing shape & size complete to match the original as shown on drg
Top made out of 18/19mm MDF board of existing shape & size complete to match the original as shown on drg
Doors made out of 18/19mm MDF board of duly fixed the S/S Knobs etc of existing shape & size complete to match the original as shown on drg as directed
CP Knobs of existing shape & size complete to match the original as shown on drg as directed
Drawer made out of 12mm thick MDF board for side and 06mm thick ply wood commercial for bottom including knobs CP of existing shape & size complete to match the original as shown on drg as directed
Base made out of 18/19 mm MDF board of existing shape & size complete to match the original as shown on drg
Sides made out of 18/19mm MDF board of existing shape & size complete to match the original as shown on drg
Back ply made out of 06 mm plywood commercial of existing shape & size complete to match the original as shown on drg
French polish to under mentioned item of furniture articles (of messes, Units, IB etc) with high class finish after rubbing old polish. The surfaces shall be rubbed down to smoothness with sand paper, the porous in wood shall be filled with filler solution as directed
Almirah large wooden with shelves/without shelves, half hanging & half shelves, Almirah small with shelves/Almirah Med, half hanging and half shelves, Almirah mess utensil/Almirah Map, Book shelf open small/large, Book Case wooden/Book case library pattern FD-45(M),FD-65(M), FD-93(M),FD-109, FD-110,FD-147, FD-335,FD-355, FD-356,TP
Bed ply wood top/Bed Hard Wooden/Bed Newar, Double Bed Trade Pattern FD-213,FD-214, FD-245,FD-1121, FD-247,FD-1102,FD-1120,FD-246,TP
Bin linen small/large. FD15(M),FD-212, FD-244,FD-385
Chair writing/CBA/CB office/CBB/dining/Chair easy FD/NF/Chair wooden bottom (BKB)/BKA/Chair CBA with hand rest, Chair Dining Long Back (TP), Chair Easy(TP), Chair Wiriting Wooden (TP) etc.FD-16(M),FD-17(M), FD-20(M),FD-56(M), FD-148,FD-149, FD-201,FD-202, FD-203,FD-225, FD-228,FD-229, FD-250,FD-279, FD-280,FD-285, DB-4174,TP & Long Back Dining Chairs
Mirror Frame (TP), Hat stand with mirror, Decorative Frame FD-23(M),FD-206, FD-233,FD-361, FD-362,TP
Side board all type FD-26(M),FD-241, FD-150(M),FD-371,FD-372, FD-391,FD-1112,TP
Stool dressing various type FD-27,FD-1114,TP
Table writing Med/Table writing FD/Table office clerk wooden/Table office officer wooden/Table 900x900x760mm /Table 3’x2’ with or without drawer/Table writing cadets/Table Examination/Table one piece/Table two pieces for all purposes/ Table dining 6 Pers FD-30(M),FD-41(M), FD-42(M),FD-55(M), FD-88(M),FD-94(M), FD-223,FD-224, FD-239,FD-352 FD-269,FD-273 FD-376,FD-283, FD-284,FD-291 & all types of Large Tables of Trade Pattern
Table peg/Table centre/teapoy FD wooden/Table bed side FD with and without drawer FD-25(M),FD-29(M), FD-34(M),FD-134(M), FD-152(M),FD-210, FD-232,FD-235, FD-236,FD-248, FD-266,FD-274, FD- 276,FD-277, FD-278,FD-382, FD-384,FD-393 & all types of small Tables of Trade Pattern
Table dressing Gents with mirror/Table dressing ladies with mirror FD-31(M),FD-32(M), FD-230,FD-251, FD-378,FD-379,TP & various dessing table/chests
Sofa set 4 seated/5 seated cushened FD-154,FD-272, FD-281,FD-373, FD/MAP-II/02,TP
TP Decorative corner stands
TP & various drg of screen movable (W) Screen Movable Wooden
Chair dinning wooden all as specified as directed.
Table office cleark FD 4120
Table office officer FD E6
Varios Drgs of wooden Chairs Supply and Fixing 15mm dia PVC bush on the legs of Wooden Chairs Various Types with 10mm long S/S Screw (various types and drgs)
Replacement of following old broken unserviceable parts with new parts of BED PLY TOP FD-213, FD-214,FD-245, FD-246, FD-247
Hard board made out of teak wood frame of size 900x600mm including leg and 4mm thick both side teak face ply ISI marked for both sides & complete teak wood beading shall be provided all over complete all as directed
Foot board made out of teak wood frame of size 900x450mm including 4mm thick both side teak face ply ISI marked and complete 04mm thick teak wood beading shall be provided all over complete all as directed
Long rails of shisham wood of size 1800x90x35mm long as per drg duly finished and complete all as directed.
Ply wood top of size 1800x900mm of 12mm thick commercial BWR/ISI mark complete as approved by GE & rest all as per drg.
Short rails/center stuffiner of shisham wood of size 900x90x35mm long as per drg duly finished and complete all as directed
French polishing to Bed with plywood Top/Bed Newar
Mattress of size 1905x102mm (Evita) Make - Sleepwell
RPR (FD-07) Letter Box
M&L for removing of old/broken/unserviceable plastic cane and re-caning mentioned item of articles with and including 2 to 2.5 mm semi round cane plastic of white colour, best quality of approved make with a beading of cane plastic half round white 4 mm wide to match the existing complete all as specified & directed. The canning work shall be done in Godrej pattern for following items of furniture
Chair Dining / CBB (FD-279)
Chair Writing (FD-280)
Chair Easy (FD-229)
Chair CB Steel with / without arms (FD-75 (M))
M&L for removing of old/broken/unserviceable plastic cane and re-caning of chair varandha with and including new plastic cane of 4 to 5 mm semi round, white colour , best quality of approved make including replace of old shoes with and including new hard rubber shoes change with available dia of chair leg at bottom to match the exisiting all as specified as directed. The canning work shall be done in matt patern. (FD-19)
M&L for replacement of following parts of chair CB steel with arm made out of shisam wood duly canned with cane plastic half round 2 mm wide with beading of cane plastic half round 3 mm wide including polishing all as per drg (FD75 (M)
Back of chair CB steel with arms FD-75(M)
Seat of chair CB steel with out arms FD-75(M)
Back of chair CB steel with out arms FD-75(M)
MS flat iron 15 mm width 4 mm thick to be welded to chair CB steel with arms for strong hold the seat and length as required including a coat of red oxide primer FD-75 (M)
Arms of chair CB steel with arms made out of well seasoned Teak wood including polishing over a coat of primer after preparation untreated wooden surface all as specified as directed by Engr-In-Charge FD-75 (M)
S&F in repair 0.5 mm thick sunmica sheet fixed by chemical adhesive to timber frame work as in shelves, shutter, cabinate of kitchen complete all as specified as directed.
M&L for gas welding to broken steel frame of chair CB steel with arm / without arm chair varendah, steel rack, table dinning, table office chair easy steel etc welding shall be done continously type complete all as specified as directd.
Taking out damaged revolving chair wheel and refixing of new caster and PVC wheels to revolving chair with superior quality as approved by Engr-in-Charge.
Taking out unserviceable cusion / tapesty / rexing and supply and fix new cusion with tapesty / rexine of chair (seat and back including hand rest complete.
Replacing unserviceable hydrolic sysytem of revolving chair including necessary work all as specified as directed.
S&F in repair brass knob 40 mm dia with nut and bolt along with washer all as specified as directed.
S&F in repair Brass handle 75 mm long along with nut bolt and washer all as specified as directed.
S&F in repair 10 mm thick toughned glass for top of office table, centre table, tepoy etc.. cut as per size required and edges are finished as in bevelled edge or bullnozed edge as approved all as specified as directed by Engr-In-Charge.
CITIZEN FURNITURE INDUSTRIES
M R Taders
Modern Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .