ADDITION/ALTERATION WORKS AT DVOR COMPLEX AT ICGAS DAMAN

Amount

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises and removal of debris out side from MD land etc complete all as specified and directed.

Taking down door/ window shutter with frame (without taking off shutters from frame) of any description exc. 1.50 Sqm not exc 4.00 Sqm each etc complete all as specified and as direted.

Taking down door/ window/ventilator shutter with frame (without taking off shutters from frame) of any description n.exc. 1.50 Sqm each etc complete all as specified and as direted.

Taking down cement plaster of any description from walls, ceilings etc. including raking out joints, hacking for key, scrubbing down with water etc. removal of rubbish off the premises and removal of debris out side from MD land etc complete all as specified and directed.

Dismantling water tanks capacity exc 1000 ltr but not exc 2000 ltrs and removing to store complete all as specified and as directed

Taking down existing roof treatment including layer of plaster and cleaning the surfaces and removal of debris out side from MD land etc complete all as specified and directed.

Demolition of plain cement concrete and pavings (unreinforced) in any position exc 15 cm thick and removal of the same outside MD land etc complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as directed.

S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Complete all as specified and directed

S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions, Complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (using 20 mm graded aggregate) 75mm thick as in plinth protection etc complete all as directed by the Engineer-in-Charge.

M&L for PCC type B-1, 1:2:4 (20mm graded aggregate) 40MM thick as sub base of flooring, Complete all as specified and directed by Engr-in-Charge.

M&L for Screed bed or bedding layer of mortar 20 mm thick in Cement Plaster (1:4) for laying floor finishes, completed all as specified and directed.

M&L for rendering 10mm thick in Cement Mortar (1:3) on fair faces of brick work or concrete surface (used as screed bed for tiles in vertical surface), completed all as specified and directed.

M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured to match coloured tiles, Complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces such as skirting / dados Complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F for glazed ceramic coloured tiles 300x600x7mm thick on vertical surfaces such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM (1:3) as in backing coat complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:6) internal plaster on brick/concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for rendering in CM (1:4) 20 mm thick in two coats (15 mm under coat + 5mm finishing coat) on brick/concrete surfaces with water proofing compound @3% by weight of cement in finishing coat and finishing the surface even and fair. (Note :- WPC will be measured and paid seperately).

M&L for rendering 5 mm thick on fair faces of brick or concrete surfaces of ceilings in CM (1:3), finished even and smooth without extra cement complete all as specified

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper paint on walls over a coat of alkali resistant primer including 1.5mm thick wall care putty, complete all as specified and as directed .

M&L for preparation on new plastered surface of wall, chajja, parapet etc and applying two coats of acrylic emulsion paint (two or more coat applied @ 1.67 ltr/10 sqm over including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including 3mm thick wall care putty complete all as specidied and as directed

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper paint on ceiling over a coat of alkali resistant primer ncluding 1.5mm thick wall care putty, complete all as specified and as directed .

M&L for Providing and fixing factory made uPVG white colour Sliding window area not exceeding 2.0 Sqm each Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

Supply, and fixing 30 mm thick factory made uPVC door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall hickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S.galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineerin- charge.

Supply only 5.50 mm thick float glass (area of each pane exc 0.50 sqm) fixed in aluminium sliding window/door shutters etc complete all sas specified and directed.

S&F for Solar controlled film 50 micron reflective type sticked to glass as per instructions of manufacturers all specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, Complete all as specified and directed.

M&L for prepration of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer , complete all as specified and directed.

S&F for Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 60 to 80 Kgs. complete all as specified and directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of mild steel heavy duty and fixed. complete all as specified and directed.

S&F for mortice lock vertical type of brass of size 100mm 4 lever fixed to aluminium door with complete fittings etc complete all as specified and directed

S&F for Butt hinges, medium weight 100MM Size, cold rolled mild steel, and fixed to chowkhat and door, complete all as specified and directed.

S&F for 200mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed.

S&F for 150mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed.

S&F for 250mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.

S&F for 150mm size extruded brass handles fabricated type, polished etc complete all as specified and directed

S&F for floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm.

M&L for Rim latch with two levers (150mm size of latch), of brass body. Polished bright; with brass knob or lever handle and fixed

Taking up or down 15 mm bore dia Steel Tubing and connecions fixed to walls or laid in floors/ trenches etc complete all as specified and directed.

Taking up or down 20 mm bore dia Steel Tubing and connecions fixed to walls or laid in floors/ trenches etc complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10cm girth.

S&F for 15 mm dia bore medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed.

S&F for 20mm dia bore medium grade galvanised steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed.

S&F for 15mm bore fancy type bib tap, cromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed inlcuding taking down old complete all as specified and directed.

S&F for vitreous china squatting pan,Orrisa pattern of size 580mmx440mmwhite with integral foot rests 10 ltr capacity PVC valveless, syphonic action type, low level flushing cistern with inlet, ball valve, float valve and handle including brackets including all connecting to flushing cistern (32mm dia waste pipe inlcuding taking down old complete all as specified and directed

S&F for vitreous china WHB white, flat back size 550mm x 400 mm including cutting for and pinning in ends of CI brackets, 32mm dia waste pipe and making good wall or floor fitting to match existing surface inlcuding taking down old complete all as specified and directed

Supply only Pillar tap cast copper alloy with capstan head, fancy type, chromium plated screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe & fixed, complete 15 mm dia suitable for WHB complete all as specified and directed by Engr-in-Charge.

S&F for 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends etc inlcuding taking down old complete all as specified and directed

S&F for soap dish of PTMT any colour fixed with and including CP brass screws and wooden/plastic cleats inlcuding taking down old complete all as specified and directed

S&F for 20mm dia & 60 cm long `D' type, chromium plated brass tubular towel rail between flanges inlcuding taking down old complete all as specified and directed

S&F in repair vitreous china, 1st quality urinal half stall type, white, with and including brass chromium plated flush pin, 40mm dia brass CP waste coupling and 40mm dia PVC HDPE waste pipe with all other necessary fittings etc complete all as specified and directed.

S&F for CI floor/nahani trap 75mm dia with grating, incl jointing to waste pipe in run lead complete and making good the disturbed surface to match existing surface inlcuding taking down old complete all as specified and directed

Demolition & breaking up drain pipes upto 110/75 mm dia (salt glazed ware, AC,PVC or reinforced concrete) set in cement mortar.

S&F for 75mm bore of pipe PVC (SWR) pipes single socketted in any length with rubber ring joints laid in walls / floors etc complete all as specified and directed.

S&F for 110mm bore of pipe PVC(SWR) pipes single socket in any length with rubber ring joints laid in walls /trenches or in floors etc complete all as specified and directed.

S&F for PVC (SWR) 75mm Bore Bends any radius

S&F for PVC (SWR) 110mm Bore Bends any radius

S&F for PVC (SWR) 75mm Bore vent cowl

S&F for grating doom 100mm dia of PTMT (min weight 25gms) inlcuding taking down old complete all as specified and directed

S&F for grating doom 100mm dia with waste hole of PTMT (min weight 40gms) inlcuding taking down old complete all as specified and directed

S&F for shelf of PTMT fixed with and including chomium plated brass scews and wooden/plastic cleats (Min wt 300 gms) inlcuding taking down old complete all as specified and directed

S&F for PVC connections 15mm size with PTMT nuts of length 600mm

M&L for concealed stop cock CP with wall flange, fancy type 15 mm bore dia.

S&F for Rotational moulded Polyethylene water storage tank -2000 liters capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I including 25mm dia of bore, ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching internal dia of pipe 150mm etc complete all as specified and directed.

Supply and Application of 5 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leaking concrete roof surface by thorough surface preparation with high pressure water jet, having a pressure of min. 125 bars, followed by (a) Opening the cracks, and application of one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance having min. 50% solids, filling and sealing the cracks, (b) Over coating with 2 Coats of NEEWP + Cement mixture as waterproofing coat having +450% Elongation followed by curing. (The surface is then to be tested for water tightness with ponding test for min. 2 days) (c) Top-coated with 2 Coats of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa The material must have passed 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matty finishing, Thickness shall not be less than 120 microns using brush, roller, airless spray gun as applicable. The product should be certified by NABL Approved Lab and application is to be done by company approved applicator only

M&L for modular works in cupboard for multipurpose storage of equments hold with MDF Board including ATT protection smooth looking appear design finishing complete all accessories and transpotation all as specfied and directed by EIC

Dismantling of posts struts (wood , steel or RCC) any section incl taking out embedded portion in concrete or brick and making good.

Dismantling of fencing wire /barbed wire, any type

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50 m in hard/dense soil complete all as specifed and as directed

M&L Plain Cement Concrete Type C2 1:3:6 using 40 mm graded stone aggrgate as in foundation filling and mass concrete complete all as specified and as directed.

M&L for providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area Exc 100 Sq. cm but n exc 250 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

S&F Mild steel work of angle iron or flat iron etc for railings, balusters, nosing to steps including embedding in concrete and screwing etc, flat iron for posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290 complete all as specified and directed.

S&F Mild steel work as in bands, straps, clamp, wall ties conforming to Fe 290 Gde F-165 complete all as specified and as directed.

Mild steel Round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

Mild steel Round bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

Supply only Chain Link MS galvanized fencing any size and any type complete all as specified and as directed

Fixing only Chain Link MS galvanized fencing including wires any mesh, size and any type of standards rails, straining bolts etc including provision of binding wires complete all as specified and as directed.

S&F Galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rail straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc, as directed (each line wire to be measured) complete all as specified and directed.

Mild steel screw bolt 11 to 15 mm shank dia neck (machine made) with hexagonal or square head at one end and screws the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exc 5 cm long complete all as specified and as directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismentling stone sett/Interlocking paver tiles of any description of thickness laid dry of laid dry by pointing, complete all as specified and directed.

M&L for 100mm thick sand filling /cushioning under floors or in foundation including watering and consolidation complete all as directed by Engr-in-Charge.

M&L for Machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade mixed with grey cement and pigment over complete all as specified and as directed.

Labour only for Machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade mixed with grey cement and pigment over complete all as specified and as directed.

S & F for Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any guage, thickness, from roof covering / vertical clading complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to I.S 1161-1998 grade St-240

S&F rolled mild steel section, conforming to FE-290 (Gde E-165) quality -A as in rafter, purlins, where connected independently to common rafter and running rails, fixed with angle cleats or other connected plates all as specified and as directed by the Engr-in-charge.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut size of bolt 11 to 15mm dia and exc 10cm and n exc 15cm long

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in hangar door /cladding to wall, height n.exc 20m, fixed with self tapping screws complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in valley gutter/ridge etc fixed with self tapping screws complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan socket or power ) point complete,including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, etc complete all as specified and directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

One light point controlled by one switch.

One fan point controlled by one switch.

One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size

All as per item No.99 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.

Supply & fixing in repairs modular type switch 6 Amps ,1way,1 module.

Supply & fixing in repairs modular type switch 16 Amps ,1way,1 module .

Supply & fixing in repairs modular type socket 6 Amps, 2/3 Pin combined 2 module .

Supply & fixing in repairs modular type socket 6 A/16 Amps, 6 Pin combined 2 module.

Supply & fixing in repairs ceiling rose, 3 terminal ,PVC/polycarbonate body

Supply & fix in repairs modular type fan regulator stepped type 120 W- 2 module.

Taking down existing tube light fitting, ceiling light fitting of any type/make complete and replacing of bipin holder,starter, connector etc and fixing back in existing or other place by providing PVC square box -02 Nos,tube rod and adequate length of three core flexible copper cable 0.75 sqmm from ceiling rose to fitting.

Supply and fixing LED lights fitting 1x 22W, 220V, 4' long AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply & fix in repair recess mounting high lumen LED slim panel 2'X2' 36Watt, white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessary fixing arrangement at any height complete all as specified and directed.

Supply and fix in repair, factory made, TPN DB's, 04 way 415 volts, AC,TPN, MCB distribution board, double door, painted with epoxy based powder coated suitable for mounting MCB FP, 16-36 KA and MCB SP /TP as outgoings and complete with and including 200 amps rated copper busbar, neutral bar,earth bar, connecting cable links with and including top and bottom removable gland plate, complete with IP 43 protection, all as specified and as directed.

Supply and fix in repairs MCB distribution board SPN 8 way 240 volts, double door with IP 42 protection duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 Amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate including removing old unserviceable item complete all as specified and as directed.

Supply and fix in repairs for MCB FP 63 Amp 10 KA "c" series complete all as specified and directed.

Supply and fix in repairs for MCB SPN 40 Amp 10 KA "c" series complete all as specified and directed.

Supply and fix in repairs for MCB SP 20 Amp 10 KA "c" series complete all as specified and directed.

Supply and fix in repairs for MCB SP 25 Amp 10 KA "c" series complete all as specified and directed.

Supply & fix in repairs for MCB SP 6 to 32 Amps 10 KA,"C" series complete all as specified and directed.

Supply and fix in repairs of metal clad plug and socket with MCB SP 20 Amps, 10KA C 'series,240 Volts.

Material and labour for submain wiring along with earth wire using 2 X 4.0 sq mm(colour coading) + 1X4 sq mm earth wire(green colour) of single core PVC insulated multistranded copper conductor 1100 Volts grade FRLSH type in and including PVC conduit size as per site requirment medium grade such as Tee ,Corner, overlaping connector etc.along the concealed in walls/roofs/ ceilings/floors etc NOTE: Concealed wiring shall be done till the height of ceiling and there after on ceiling wiring shall be done through PVC casing caping.

Material and labour for submain wiring along with earth wire using 2 X 6.0 sq mm(colour coading) + 1X6 sq mm earth wire(green colour) of single core PVC insulated multistranded copper conductor 1100 Volts grade FRLSH type in and including PVC conduit size as per size requirment medium grade such as Tee ,Corner, overlaping connector etc.along the concealed in walls/roofs/ ceilings/floors etc NOTE: Concealed wiring shall be done till the height of ceiling and there after on ceiling wiring shall be done through PVC casing caping.

Supply and fixing in repairs ceiling fan complete blades, down rods, elecrtonic regulator and accessories 230 V, 1200mm sweep Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) without remote etc all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fix high flow wave wall mounted fan 400 mm sweep, 1300 rpm, plastic body all as specified and directed.

Taking out window/split type AC of capacity 1.5/2.0TR, opening of the same and checking / detecting the fault and carrying out necessary repair and replacement of unserviceable spare/parts as required to make it operational, reassembling and refixing the unit to its position complete including servicing all as specified and directed. Note:- (a) The labour cost for replacement of spares/parts shall be deemed to be included in this item. (b) The rates shall be inclusive of transport from the site to workshop and vice versa before and after the repair.

Supply and install testing and commissioning of split type air conditioner 2 TR capacity of inverter technology 3 star rating with inbuilt air ionisor filter and plasma filter for better indoor air quality EER 3.2 with cordless remote control,single phase,240 volts complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length as required at site, indoor mounting plate, duly powder coated fixingwith anchor bolts at any height,drain pipe of suitable size brought to ground level from any height, intial filling of refrigerant gas inculding making round hole on existing wall for taking up refrigerant tubing, drain pipe,cables etc and making good the disturbed surface by matching with existing adjoining surface complete all as specified and directed Make :- VOLTAS/BLUESTAR/LG/GODREJ/Daikin

Supply and fix Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type ,Wall mounted type & designed for input variation between 130 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3800 VA suitable for 2 Ton AC . Make- V Guard VGB 500 PLUS or equivalent.

Supply and fix factory fabricated mild steel stand suitable for installation of out door unit of split type air conditioner fixing arrangement with anchoring bolts on wall surface at suitable height as per site condition.

Supply and fix in repairs down rod made of MS pipe mediun grade 15mm dia of 60cm long duly predrilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan

Supply and fixing in repairs LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting complete all as specified and directed.

Supply and fixing in repairs LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with all accessories and necessary fixing arrangement on pole at any height including three core 0.5 sqmm copper cable from connector to fitting complete all as specified and directed.

Supply and fix post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact andcorrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and fix in repairs GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces. The bracket pipe shall be welded to the MS strip of size 32mmX 5mm thick at three places for purpose of giving strengthening to the bracket pipe and fixing with necessary suitable nuts,bolts & washers complete all as specified and directed.

Supply and fix in repairs FRP looping box of size 230x170x105mm with three phase connector and comprising of MCB SP 6 Amps, ISI marked,240V complete with and including providing GI clamps,nuts bolts etc suitable for fixing on PCC pole/ wall etc complete all as specified and directed.

Supply and fix in repairs rigid non-metallic PVC conduit 25 mm dia medium grade including conduit accessories for encasing the cable from looping box to street light fittings on PCC poles/on wall surfaces as per site requirement with neccessary base saddles all as specified and directed.

Supply and fix Prestressed concrete poles of 9 meter long having 152 mm x 152 mm at top and 152 mm x 260 mm at bottom.

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade, 3 core ;2.5 sqmm and including connection and testing inlcuding removing old unserviceable item complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core

Supply and lay new high density polyethylene DWC pipes of 63mm OD/ 50mm ID, 6 kgf/sqcm including all fittings (bends, Tees, Elbows, sockets, etc) as required on site, complete all as specified and directed. Note:Excavation, return filling and removal of any type of soil/ strata shall be measured and paid separately under respective items of BOQ.

Excavation in trenches , not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

M&L Plain cement concrete 1:2:4 type C-2 (using 20mm graded crushed stone aggregate) as in pole coping incl necessary form work complete all as specified.

M&L Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified.

Supply, installation, testing and commissinoning LT panel board suitable for working on 3 phase ,4 wire ,415 volts, AC ,50Hz Outdoor type, cubicle, floor mounted, free standing, dust and vermin proof, air ventilation factory fabricated made out of 3.15 mm thick CRCA sheet duly powder coated 7 tank process and shall be CPRI approved. The Panel shall have front and rear opening,locking arrangement, cable alleys, bus bar chamber and switch gear compartment ,hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate,aluminium bus bar duly covered with heat shrink sleeves colour coaded duly fixed on DMC/SMC insulators, housed in a separate bus bar chamber and control wiring with copper conductor cables of adequate size and length,incoming and outgoing MCCBs shall have extended bus bar links and mounted on 50x50x5mm size MS angle iron frame duly 7 tank process painted including PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate ) in foundation design subject to approved of GE complete all as specified and directed including comprising of following :- (a) MCCB 100 Amps,FP, 25 KA,415 volts,50Hz-1 No (Incomer) (b) MCCB 63 Amps,TPN, 16 KA,415 volts,50Hz-3 No (Outgoing) (c) Digital voltmeter,with VSS , Digital, Ammeter,with CTs & ASS-01 set (d) LED phase indication lamps RYB-01 set (e) Aluminium bus bar TPN 200 Amps rating -01 set (f) Spare space for extra MCCB

Supply, installation, testing and commissinoning LT panel board suitable for working on 3 phase ,4 wire ,415 volts, AC ,50Hz Outdoor type, cubicle, floor mounted, free standing, dust and vermin proof, air ventilation factory fabricated made out of 3.15 mm thick CRCA sheet duly powder coated 7 tank process and shall be CPRI approved. The Panel shall have front and rear opening,locking arrangement, cable alleys, bus bar chamber and switch gear compartment ,hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate,aluminium bus bar duly covered with heat shrink sleeves colour coaded duly fixed on DMC/SMC insulators, housed in a separate bus bar chamber and control wiring with copper conductor cables of adequate size and length,incoming and outgoing MCCBs shall have extended bus bar links and mounted on 50x50x5mm size MS angle iron frame duly 7 tank process painted including PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate ) in foundation design subject to approved of GE complete all as specified and directed including comprising of following :- (a) MCCB 100 Amps,FP, 25 KA,415 volts,50Hz-1 No (Incomer) (b) MCCB 63 Amps,TPN, 16 KA,415 volts,50Hz-2 No (Outgoing) (c) MCCB 32 Amps,TPN, 10 KA,415 volts,50Hz-1 No (Outgoing) (d) Digital voltmeter,with VSS , Digital, Ammeter,with CTs & ASS-01 set (e) LED phase indication lamps RYB-01 set (f) Aluminium bus bar TPN 200 Amps rating -01 set (G) Spare space for extra MCCB

Supply, installation, testing and commissinoning LT panel board suitable for working on 3 phase ,4 wire ,415 volts, AC ,50Hz Outdoor type, cubicle, floor mounted, free standing, dust and vermin proof, air ventilation factory fabricated made out of 3.15 mm thick CRCA sheet duly powder coated 7 tank process and shall be CPRI approved. The Panel shall have front and rear opening,locking arrangement, cable alleys, bus bar chamber and switch gear compartment ,hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate,aluminium bus bar duly covered with heat shrink sleeves colour coaded duly fixed on DMC/SMC insulators, housed in a separate bus bar chamber and control wiring with copper conductor cables of adequate size and length,incoming and outgoing MCCBs shall have extended bus bar links and mounted on 50x50x5mm size MS angle iron frame duly 7 tank process painted including PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate ) in foundation design subject to approved of GE complete all as specified and directed including comprising of following :- (a) AC three phase static energy meter of accuracy class 1.0, 3x240 V,50Hz, with Backlite LCD display of rating 5-20A- 01 Nos (b) The Microprocessor / microcontroller based DGC-6D automatic generator start and supervisory device (Logic based AMF unit)- 01 Nos (c) MCCB 32 Amps,TPN, 25 KA,415 volts,50Hz-1 No (Outgoing) (d) LED phase indication lamps RYB-01 set (e) Aluminium bus bar TPN 200 Amps rating -01 set (f) Spare space for extra MCCB

Supply and fix Digital time switch(Daily time switch) suitable for outdoor with power contactor 16 Amps ML-2 type,3Phase,415 volts and MCB TPN 16 Amps,10 KA 'C' series, digital time switch two module, including bus bar of suitable capacity with arrangement of auto/mannual control switch duly prewired and all accessories same shall be enclosed in and including sheet metal enclosure of 3.15 mm thick CRCA sheet of adequate size with powder coated, fixing arrangements on floor including powder coated painting and mounted on 40x40x4mm MS angle iron frame duly painting and including removing old unserviceable item complete all as specified and directed.

Supply and fix integral LED aviation light luminaire comprising of 302 Nos LED complete with all accessories, prewired,aluminium housing with polycarbonate enclosure with necessary arrangement on high mast light pole, Roof top of Aircraft Hangers and overhead reservoirs at any height by adopting saftey precautions and including removing old unserviceable item complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Supply and fix Earthing complete with copper earth plate electrode 60×60cm.× 3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to copper earth strip 20 x 3 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Supply and fix Earthing strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20 x 3 mm copper earth strip complete with PVC insulators for earthing strip mounting all se specified and directed

Supply and fix Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as specified and directed.

Supply and fix Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.

Nilesh Construction (BID ID -3469914)

Anjali Constructions (BID ID -3473259)

M/s Pratap Associates (BID ID -3473933)

M/s Mukesh Engineers (BID ID -3473492)

KRISHNA ENGINEERS (BID ID -3473532)

R K TYAGIS (BID ID -3473552)

PICON ENTERPRISES (BID ID -3473899)